This is perhaps overly verbose, but the timing details helped figure out
some EON Core download issues, and it's nice to see when things actually
happen.
It's also good to see when the data actually enters our queues, and when
we read and write the packets. That might help debug the issues Fabio
is seeing with the Mares Bluelink.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We used to just find all services and connect the characteristics change
signal etc to them all, but we really only care about the actual
preferred service that we'll be using.
So move the qt ble signal connection to after we've selected the
preferred service that we will actually be enabling notifications on and
do the writes to.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
XMP is a media-metadata standard based on XML which may be used
across a variety of media formats. Some video-processing software
writes XMP data without updating the native metadata fields.
Therefore, we should aim at reading XMP metadata and give priority
of XMP data over native fields.
Pros:
- Support for *all* common media formats.
Cons:
- XML (complex, verbose, chaotic).
- Does not even come close to fulfilling its promise of being
well defined (see below).
Implement a simple XMP-parser using libxml2. Connect the XMP-parser to
the existing Quicktime/MP4 parser.
First problem encountered: According to the spec, XMP data supposed
to be put in the 'XMP_' atom. But for example exiftools instead
writes an 'uuid' atom with a special 16-byte uid. Implement both,
more options will probably follow.
Second problem: two versions of recording the creation date were found
1) The content of a <exif:DateTimeOriginal> tag.
2) The xmp::CreateDate attribute of a <rdf:Description> tag.
Here too, more versions are expected to surface and will have
to be supported in due course (with an obvious priority problem).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We use that in the mobile app to scale the whole app, as all sizes there
are relative to the default font.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to just blindly pick "first" and "last" characteristic from the
preferred service, and that was stupid but happened to work for the dive
computers we supported. Note that for some of them, "first" and "last"
was actually the *same* characteristic, since it could be a single one
that supported both.
However, this first/last hack definitely doesn't work for the Mares
BlueLink BLE dongle, and it's really all pretty wrong anyway.
So re-organize the code to actually look at the properties of the
characteristics. I don't have a BlueLink to test with, but my EON Core
and Shearwater Perdix AI are still happy with this, and the code
conceptually makes a lot more sense.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
And remove some includes and defines that are not used any more after
removal of the GPS webservice code.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Fix multiple run-time errors in connect call introduced in 504e912512.
1) Set the proper signature of the signal. 2) make the used slot
a real slot (so move it to the proper section in the header) and
3) set the proper signature for the slot.
Highly unlikely that normal users notice the runtime errors and
possibly unwantend behavior, as this all deals with the subtile GPS
service update threshold.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
We used to just pick the first non-standard service we found (with a
special case for the Heinrichs Weikamp dive computers that have an
actual registered standard service).
We then waited for that service to finish discovery, and started using
it.
This changes the logic to wait for _all_ services to finish discovery,
and then after that we pick the one we like best. Right now the rule
for picking a preferred service is the same one we had before, but the
difference is that we now have the full discovery data, so we *could* do
something better.
Plus this makes our debug messages a lot more legible, when we don't
have the mix of overlapping service discovery with the actual IO we do
to the preferred service.
NOTE! This doesn't much matter for most of the dive computers that we
currently support BLE for. They don't tend to have a lot of odd
services.
But at least both the Mares BlueLink and the Garmin Descent both have
multiple services and it's not obvious which one to use, and this will
make it not only easier to debug those, it will make it easier to pick
the right preferred service descriptor to use.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is not only much clearer (and smaller code), but it also lowers the
latency for the waiting, since we don't always wait for the full 100ms.
Get rid of the now unused "waitfor()" function that just unconditionally
waited for 100ms.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
process_dives() is used to post-process the dive table after loading
or importing. The first parameter states whether this was after
load or import.
Especially in the light of undo, load and import are fundamentally
different things. Notably, that latter should be undo-able, whereas
the former is not. Therefore, as a first step to make import undo-able,
split the function in two versions and remove the first parameter.
It turns out the the load-version is very light. It only sets the
DC nicknames and sorts the dive-table. There seems to be no reason
to merge dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We only store the address part of the connection name, so don't try to find an
exact match, try to find the sub-string.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This does feel clumsy and complicated. This is a lot of special case
handling and a lot of boilerplate for something that really should be
quite simple.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In visit_on_node() in core/parse-xml.c the name is extracted into
a static buffer. There seems to be no need for this being static,
as the name is only passed to the entry() function which (hopefully)
does not store a reference to the name anywhere.
If it does, this would need a *big* *fat* comment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The existing code creates a deterministic ID (not exactly "unique") in order to
help us avoid merge conflicts in git-storage mode. But as a side effect, if we
re-download the same dive twice from a dive computer that supports GPS (right
now only the Garmin Descent Mk1) we are guaranteed to create the same dive site
uuid when we do this. So when we download a dive - whether we will actually
*use* that dive later or not - we will be filling in the dive site information
with the data we got from the dive computer.
... and in the process we will be overwriting any data that was filled in
manually. The name of the dive site, but also possibly even the GPS of the dive
site (maybe the user decided to edit that using the map, because while the
automatically downloaded GPS data was "correct", maybe the user wanted to
change it to be the actual under-water location using the satellite data,
rather than the place where you started the dive or where you surfaced).
In order to avoid this collision, this patch just makes the libdivecomputer
download not use the dive time, but "time of download" for the dive site time,
and thus effectively generate a new uuid for every download.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On import of dive media, the timestamp is read from the
metadata to check if the image belongs to the selected dives.
The pictures are then listed in a dialog.
Currently, the metadata is read twice if images are outside
of a dive: once in picture_check_valid() and if it turns
out that the picture is not valid again in picture_get_time()
to display the proper timestamp.
Even though metadata-extraction is reasonably fast, this is
a bit of an embarrassment.
Instead, read the timestamps only once in the constructor of
the dialog and from then on only used these timestamps. Keep
the timestamps in a QVector. Rename the picture_check_valid()
function to picture_check_valid_time() and pass a timestamp
instead of a filename.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The merge_one_sample() function adds a sample to the destination
dive if dives are merged. For long periods between samples at surface
depths, it adds a surface interval.
To decrease the number of global objects, make the sample structure
non-static. Of course, initialization of an on-stack structure is
slower. Therefore move it into the corresponding if. Thus, the
structure will be initialized only once per surface-interval.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Unit_system is read from git storage but units are set from locale when the
app starts. To prevent a miss-match between unit and unit_system we have to
always update the preferences variable when set_unit_system is called so that
the user doesn't end up with imperial units when the preferences say metric.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using dc_serial_open as a fallback to ftdi_open is just wrong, and will
never work, just mask the real error and introduce read herrings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Add a checkbox that triggers replacement of all English characters by
x's in notes, buddy, dive guide and (while we are at it) suit.
This is ment for people sharing logs for debugging that are concious
about privacy issues. It leaves the lenth of strings in tact as well
as special charcters as those might be needed to track down a particular
parsing problem.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Automate calling of setGpsTimeThreshold when qPref..::time_threshold changes
and thus avoiding the need to call setGpsTimeThreshold directly.
Signed-off-by: Jan Iversen <jani@apache.org>
Windows doesn't have nanosleep() unless libwinpthread is used.
Since the nanosleep() usage in serial_ftdi_sleep():
- does not break in case of EINTR
- has input in milliseconds
the WINAPI Sleep() should be a good alternative.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
1) Add a missing <div>
2) More importantly: recognize html content via <div>-tags instead of
<table>-tags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QML is quite special, the variables needs to start with lower case in C++
and are used starting with upper case in QML
Signed-off-by: Jan Iversen <jani@apache.org>
In order to address the C++ object directy in qml, a different
registration is needed.
qmlRegisterType, registers the C++ class, allowing qml code to inherit
from it and make qml objects. This is needed for graphical elemnets
like profile and map
setContentProperty, registers the C++ object, thus allowing signals to be
catched.
Signed-off-by: Jan Iversen <jani@apache.org>
Instead of having all register calls in subsurface-helper.cpp let
qPref.cpp handle all qPref registration, since they also need to be
different
update subsurface-helper and testqml accordingly.
Signed-off-by: Jan Iversen <jani@apache.org>
QML demands signals to be of the form
<name>Changed
Changing all of qPref
REMARK: this commit is not compileable, since it only change qPref and not
the rest of the system
Signed-off-by: Jan Iversen <jani@apache.org>
And finnaly, get rid of the definition in the overall struct.
And one usage of the preferences was still around.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Despite the fast that this code is sitting in core, its used mainly
from mobile. In 987e221f8e, the buttons to interact with the GPS
webservice were deleted from the UI. Now, delete all the code that
was used under these buttons.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
