Based on suggestions from Linus (and a few iterations) we now simply have
the surface (i.e., background color / pattern) come down to where the
ceiling is. And we only do the angry red shading when the diver violates
the ceiling.
I think this looks much better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user closes the divelist and starts with an empty file it makes
no sense to assume that she only wants to download new dives since the
last time dives have been downloaded. So if the current divelist is empty
we ignore that information and start from the beginning again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Plot a red-shaded area on top of the depth profile to indicate the deco
ceiling (i.e., the area into which it isn't save to ascend at this point
of the dive.
So far this is of very limited use as libdivecomputer doesn't give us the
necessary information to plot this. I have sent patches for the OSTC to
Jef, hoping that he will include them in an update. I don't know how many
other dive computers will make this data available - I still need to add
this to our native Uemis support.
This commit also fixes two cut and paste errors in the previous commit
6540be9bd924 "Process ceiling events and store ceiling data in plot_info".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to have very spotty logic for picking the dive trip when
merging two dives. It turns out that that spotty logic almost never
really matters, because in practice you'll never hit the situation of
merging two dives with different dive trips, but it *can* happen.
In particular, it happens when you use multiple dive computers, and
end up loading the dives from one computer on top of the dives of your
other computer. If the clocks of the dive computers was set
sufficiently close to each other, the dive merging logic will kick in
and you may now have slightly different times for the dives that get
merged, and the trip merging logic got *really* confused.
The trip management also depends on the trip dates being updated
correctly when the dives associated with a trip are updated (whether
added or removed), and the trip merging code did none of that.
This fixes it all up. Hopefully correctly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing implementation failed on dive computers that did gas changes
based on events (instead of tracking them in the sample data like the
Uemis Zurich does that I tested the code with).
This commit moves the calculations slightly later in create_plot_info()
after the gas change events are processed and the plot_info data has been
fixed up. Now this works with the data from Linus' Suunto as well.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The pN2 print shouldn't have been committed, but I don't want to try and
rewrite all the commit history. Oh well.
The pressure scale I am ambivalent about. It seems that it should be
useful - but that would require guide lines that coincide with the values
which would really throw off the visual for me. So I added the code, but
left it disabled.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I can't remember why we initially did this instead of ending the
horizontal red line whith the last data point of the pressure profile. But
especially nuw with more graphs shown the one line that extends past the
end of the dive looked really silly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We always want to print absolute maxima and minima - but not when multiple
consecutive data points all have the same value (this happens, for
example, when printing a pHe plot on non-helium dives - or when the dive
profile includes a brief surface intervall which causes all the partial
pressures to be at their minimum).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Whatever I pick here, there will be dives where the different graphs end
up interfering with each other. I don't think there isn't an easy, generic
solution for this (but I can envision awesome non-easy solutions - they
just don't seem to be worth the effort).
But for most dives that I played with this seems to work pretty well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was introduced in commit ee803ef5d85b "Change preferences into a
notebook and add second page for tec settings"
In order to be able to get the new default XML file name back from the
button, we need to keep that variable around and not overwrite it with
more buttons for the tec preferences page.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the import thread is running it is possible to:
1) click the [x] button of the "download dialog".
To prevent that, we attach a "delete-event" signal to no-op function.
2) to interact with the main window, once the "accept" event is triggered.
To prevent that, we make sure that the window is set back to "modal".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Windows, device names can end up being <drive-letter> (<drive-label>).
In such a case we are only interested in the <drive-letter> part, when
passing this value to libdivecomputer.
This patch provides a method to trim all text in parentheses and also
any leading and trailing whitespace.
An important addition is enabling back the user to enter a device
manually even it's absent in the combo box list. This device is
then stored and retrieved as the default device, but not stored
in the device list (dc_device_selector()).
As a side effect this change prevents the download dialog closing,
when a user-entered device is not one of the found devices via
subsurface_fill_device_list().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lubomir's commit aec904b612 broke the Add
Dive menu item: The Edit Dive dialogue didn't show up after the initial
dialogue.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk's commit 2de6f79635 had a typo.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The algorithms attempt to identify "interesting" points where the user
might want to know the value of the graph.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adjust the color for pN2 to the standard for this gas (black). We keep pO2
green (even though the ISO 32 color for that would be white). pHe is
marked in brown (which is the matching standard color).
Calculate correct partial pressures for the synthetic plot info points at
the beginning and end of the dive.
Minor fine tuning to the positioning / scaling of the temperature plot
when partial pressures are plotted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So few of my dives are on air that at first I didn't notice - but for
those dives we set the o2 permille to 0 - which of course causes incorrect
(and extremely deadly) pO2 of 0...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fairly simplistic change that modifies the way we calculate the "maxdepth"
for a particular dive as that is used to scale the plot vertically.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not sure this is the best naming scheme (General Settings / Tec Settings)
but it's a start.
The idea is to have the settings that a recreational diver might care
about on the first page, and all the other stuff on the second one. Let's
see how this works out long term. For now I moved OTU over and added
toggles for the different partial pressure graphs (only the pO2 one is
implemented so far).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far this is done unconditionally. This already starts some of the
infrastructure for other gases, but so far only O2 is handled.
We also need a pressure scale on the right to make this useful - or we
need to do peek / trough pressure prints like we do for temperature and
depth.
Finally, I think I want to move the plot further down, maybe make the
whole plot area taller if we are plotting partial gas pressures as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the device selector when downloading from a divecomputer add the drive
name that we have been looking for (so far that's only "UEMISSDA") to the
drive letter - this should make it easier for people to figure out why
there is a drive letter offered as an option.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
subsurface_fill_device_list() now goes trough the list of registry
entries in the SERIALCOMM key and adds all present values (such as
COM1, COM2) to a GtkListStore. Once done the function compares
all logic drive label to a static list of known DC labels,
such a 'UEMISSDA', which is the only present one at the moment
and adds any matching drive letters (e.g. C:\, H:\) to the list store
as well.
If no serial ports were added or no matching logical drives were found
the function simply adds a default entry named "COM1".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
I just tried downloading some duplicate dives I had on my second dive
computer, and it all "just worked" and subsurface merged them for me.
Almost perfectly.
I say "almost", because in merging them, it threw my old weightsystem
data away, due to that not being merged.
Also, it was a perfect merge only because the computers are so similar
that they just line everything up - same water activation logic, same
sample interval, same pretty much everything. So while I know the
sample merging is not really the right thing to do (it was designed to
get the "merge the exact same dive from the same computer" case
right), it worked well enough for this particular case. I'll look at
something better later.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to be unobtrusive, but add more information for people
who aren't satisfied with the numeric value we put inside the plot to mark
local peaks and troughs.
See ticket #9
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added missing translations.
Reviewed and fixed strings marked fuzzy.
Changed date-format to something resembling the usual Dutch notation.
Changed names of months to lowercase.
Changed translation of divemaster from diveinstructor to diveleader.
Fixed some typos.
Signed-off-by: Reinout Hoornweg <reinout@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out we had a data field for visibility as a length unit - but never
used it. I can never guess how much visibility we actually had on a dive -
but I think most everyone can assign a rating between abysmal (zero stars,
"I couldn't read my dive computer even right in front of my mask" - trust
me, I had some of those dives) to amazing ("five stars, I could see farther
than I though possible" - and I had one or two of those, too). So I
changed this to an integer and am re-using the star infrastructure we have
for the overall dive rating.
When displaying this I was dismayed that we are running out of space in
the "Dive Notes" notbook. So I moved this to the "Dive Info" notebook.
This is not consistent and not logical. I think we need to revisit the
notebooks and think about what we want to display where.
While adding the infrastructure to manually enter the visibility I went
ahead and added the ability to manually enter the air temperature as well
(that was one of the things missing in the previous commit).
Fixes#7
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we don't parse air temperature data via libdivecomputer. Nor are we
set up to allow the user to manually enter it. We can parse it when
downloading from a Uemis Zurich, though.
This feature was suggested via trac.hohndel.org; this commit implements
only part of what is requested there, so I simply reference the ticket
here without closing it.
References ticket #7
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We try to identify devices that are connected and their matching device
names (and mount paths in the case of the Uemis Zurich). Those are
presented as a drop down menu to choose from. The user can still override
this by simply entering a different device / path name.
On Windows this is not functional. How do I find out which drive letter
corresponds to the USB device named "UEMISSDA"? Similarly we need code
that finds serial ports that are present. For now we once again default
to COM3 (so this isn't a step back, but of course it's far from what we
want).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this commit we not only use the getDivelogs command but also the
getDive command for each of the dives that was downloaded. Oddly, that
makes quite a bit of redundant (and at times slightly contradictory) data
available, but also many new things.
We now get weight, suit and notes that were stored with a dive in the
logbook on the divecomputer. There are a ton more data available that we
don't use, yet. For example information about altitude, a decoindex, dive
type and dive activity, other equipment information, etc.
I still need to decide how much of this I want to make available in
Subsurface (and how I want to present this - after all most of this is not
available from other dive computers).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes it easier to debug things in a debugger, but the infrastructure
to send out debug builds where an end user can send in a useful logfile is
still in place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
divelist.c:
Show a "Yes/No" confirmation dialog when performing delete/remove
operations for dives and trips.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
info.c
- Removed the additional pop-up menu entry "Delete"
- Removed the delete_dive_info() function, which created
the yes/no dialog.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) info.c: always check for "amount_selected > 0" before calling
edit_multi_dive_info().
2) populate_popup_cb() should only add the "Edit" and "Delete"
items if there are dives are selected
3) in info_menu_delete_cb() we clear the selection, therefore
we need to set "amount_selected" to 0.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gives some information on some of the oddities when downloading from
a Uemis Zurich.
Also run a spell checker against the user manual.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the result of a joined effort of several people. Thanks to
Pablo Garcia Castro <freixido@gmail.com>
Matthias Kaehlcke <matthias@kaehlcke.net>
Sergio Schvezov <sergiusens@ieee.org>
Auni Somero <aunims@gmail.com>
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Sergio Schvezov <sergiusens@ieee.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
info.c: extended_dive_info_widget() was still using the
precompiler macros instead of the 'star_strings' buffer,
which may end up being modified if the unicode stars are
not supported on a certain OS (UTF8_FONT_WITH_STARS).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
