* Apply filter only when OK button pressed
* Restore tags selection from dive mask when Cancel button pressed
* Fix selection logic when selected or all dives are filtered out (hide
profile, tooltips, etc.)
Not sure whether call to repaint_dive() is required.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The check if both location and site exist was flawed causing an extra
slash on location name when the SITE was empty. Thus resulting in
multiple location candidates when exporting to divelogs.de and
re-importing to Subsurface.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds preliminary support for marble widget, alongside with the
dive list. my idea is to let the view stay there at the left of the
dive list since we got a lot of unused space and a globe is something
nice to have - so you can look around where did you dived, the
dives near the one that's currectly selected, and so on.
I'm not using OpenStreetMaps right now, but a good thing about
marble is that it is skinnable - so for instance, a dive school
could present a dive lesson using subsurface with a globe from the
1600, to make it feel like 'history'.
This version will only compile to Qt4.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Thanks to commit 347019272a57 ("Hide user password in Upload to
divelogs.de dialog") we no longer show the password on screen.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the application launches, the oldModel is null.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just in case some crazy distributions also rename the binaries.
Renaming the binaries is not supported in Qt 5 and should never be
done. Besides, the binary names are missing from Qt 5.0.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some Linux distributions do not ship a "qmake" binary, despite
recommendations from the Qt Project. We need to cope with that, so we
search for qmake-qt4 if qmake fails.
We use "qmake -query QT_VERSION" instead of qmake -v because that is
known to produce an error for Qt 3's qmake.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes loading a second dive-file after the first
one had been loaded. it simply clears some information and
makes sure that the current selected dive is invalid when
the file closes. I also did a bit of code cleanup on this one
to make things simpler in the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On some maps, the lack of setting up the dc before plotting
the dive-computer nick caused a division by zero, breaking
the correct visualization of the dive.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The selected dive was being set to zero when the program
started, but zero is actually the first dive. There
were workarounds on the gtk code for that probably
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The value of 0 that we used is actually a valid value and could cause
confusion.
Suggested-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implemented for the following dialogs: Preferences,
Select Tags, Select Events, Renumber, Upload to divelogs.de
Not shure whether this is appropriare for Print and Planner
dialogs.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Both autogroup and manual creation of trips is explained. Once the user
looks at manual creation, the other trip manipulation options should be
fairly self-explanatory.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Swiss German is now fully translated.
The Dutch translation had one message string containing a few "\\n"
symbols - those happen when translators explicitly enter "\n" in the
Transifex web interface (instead of just hitting return).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On installation, set the "DisplayVersion" registry value
to ${SUBSURFACE_VERSION}, so that a version is displayed
when browsing the list of installed programs.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The button was active while downloading, and that was
confusing.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- give an introduction to the dive list and explain some behaviour of dive
list to new users
- a small clarification regarding the used Buhlmann-algorithm
Signed-off-by: Thomas Maisl <exp-122004@maisl.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The label changed, but when the value was pre-set, it was always set as
metric (but then "correctly" interpreted as ft when reading it back - i.e.
it was incorrectly devided by 3.3).
Reported-by: Thomas Maisl <tom@maisl.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DM4 stores the divetime in local time. The conversion from seconds since
year 1 was 2 hours off. (So there is no timezones involved, which is
good for us!)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These were done by me through the advanced linguistic process known as
"pattern matching". I doubt that this is right in all the languages...
For some reason two new Swiss-German translations snuck in as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Writing to the dive fields for maxdepth, surface pressure, airtemp and
watertemp is not correct. In the case of duration the longer time should
go into the dive, the shorter time into the divecomputer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Editing a manually entered dive allows the user to edit duration, max
depth and mean depth. These values are stored in the first (and only)
divecomputer and the duration, maxdepth and meandepth fields of the dive
are populated in fixup_dive() after the dive was initially parsed.
In order for this to work we need to clear out the existing fields (so
that values can get smaller) and rerun fixup_dive().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The device combo box is only necessary for the Uemis Zurich, and dive
computers using serial communication. For dive computers using IrDA or
USB communication, this combo box causes only confusion for the users.
Starting with libdivecomputer version 0.4, there is an api to query the
transport type, which can be used to enable/disable the device combo box
based on the selected model.
Signed-off-by: Jef Driesen <jefdriesen@telenet.be>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The NSIS script on installation will write a key to the registry
that will be shown to the user as a "Subsurface" entry (with icon)
in the list of installed programs that can be uninstalled
(e.g. in the Control Panel).
On uninstall, said registry key will be removed.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not my preferred solution, but better than disabling divelogs.de uploads
for people using the Windows binary.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes things look nicer and also reduces vertical size of the edit
dialog - which should now fit on a 600px display again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The weight management widget added 500 grams / 0.5 lbs
when a new entry was added.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since this was just a fix for a typo, Transifex allowed me to simply pick
the existing translations for the previous string.
Also fixed a newline vs '\\n' bug in the Dutch translation.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I was too slow, so this also includes the Russian, Bulgarian and German
translation for this string plus a couple more Danish updates.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
commit 59294029f3d1 ("Capitalize package name and add capitalized tar-ball
prefix") had an unintended side effect: the cross build for Windows on
Linux no longer worked (as it set NAME=subsurface.exe).
Fixed this by introducing a TARGET variable that is derived from $(NAME).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Decided to split OSTC3 and Petrel in the ReleaseNotes (as the Petrel was
already supported in 3.0) and added the Suunto DX as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
