Simply clear the edited dive (regardless of whether it's set) and hide the
message if visible. The previous code was a little too convoluted...
Fixes#305
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes it possible to hide some columns on the Cylinders
Equipment pane. The 'remove' and 'type' are impossible to hide,
since they are the most important ones for a non-tech diver.
Fixes#281
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing a dive, a group of dives or a trip we need to make sure that
we don't lose track of which dives and trips were selected. Otherwise we
might act on dives that DON'T appear selected in the UI but that we think
are still selected.
Fixes#304
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch remembers the trip selection across the Dive Tree Model.
It's a tiny bit big because we used to have a variable 'selected
trips' that's now calculed dynamically - this is more future proof.
This is a start of Un-cluttering the view ( for 4.1 I hope to reduce the
code in this class to nearly a half. )
Fixes#303
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before, when clicking the OK button on the preferences GUI, we were
updating in-memory preferences from the GUI, saving them to the
configuration file from the GUI, reloading from the file to the
in-memory preferences. Then, to add to the ducplication, when the
application was exiting, some fields were saved again.
Basically the first step and the last step were useless appart from
the fact the the other steps where missing a few fields here and there.
This patch removes the first step and fixes the missing fields.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
ACKed-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit painful, but we basically walk the samples and pick the
valid tank from the events. And then we do a simple discrete integration
to figure out the mean depth per tank and duration per tank. And then we
assemble all that into per tank statistics.
Strangely the value calculated here seems slightly higher than one would
expect from the overall SAC rate. This inconsistency should be
investigated a bit further, but my guess it it's based on the assumption
that the DC provided mean depth is possibly more accurate than what we can
calculate from the profile.
Fixes#284
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shows how much gas form each cylinder was used. I would like to add
SAC to that list too but it became a mess trying to calculate average
depth per cylinder.
Design based on idea in #284
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Two errors fixed.
- With no location set, the summary line would start with a ','.
- When auto creating a trip for a manually added dive or when editing the
dates of dives in a trip, the timestamp for the trip was not updated
after editing the dive.
Fixes#293
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems like a much nicer user experience. Editing a location's name is
immediately reflected on the globe label, the moment it happens.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we are editing or adding a dive, the globe widget needs to act
differently. Instead of directly changing the lat/lon of selected dives,
it needs populate the coordinate text field as if this information was
entered by the user (effectively all it is is a way to more conveniently
enter coordinates).
As a side effect, this also allows us to change the location once it has
been added (you just need to go into dive edit mode to do so).
There is one weird issue that occasionally (and I can't quite reproduce
this) I get lat/lon very close to 0/0 (as if the globe widget was centered
on 0/0 and not on whatever it is actually showing). That still needs to be
addressed.
Fixes#239Fixes#131
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- get_gas_from_events does NOT always set o2/he. It only updates them IFF
a matching event is found; so we need to make sure we start out with a
valid gas mix
- the way we tried to restore the edited dive in case of an edit to a
manually added that is cancelled was completely bogus. Way too complex
when we can simply and reliably simply store the dive and then copy it
back
Fixes#270
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changes Ok button to a Save button Modifies editing messages to reference
buttons Save and Cancel.
Fixes#245
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of hard coding a American date format, let qt use whatever the
locale suggests.
Fixes#248
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just reverts some wrong changes that I'v done on a
past commit ( sorry ) and correctly handles the selectDive,
by using a IDX instead of the dive pointer, as dirk told me
it's extremely error-prone since the pointer can change.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When completing tags, the case of the completion prefix
should not matter.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit scares me. Any pointers to dives or indices into the dive
table... anything like that is invalid after we resort the table. Well,
not technically "invalid" (as in bad pointers), but after re-sorting the
table these will possibly not be pointing at what we expected.
This starts with the selection being "wrong" after we add a dive that
isn't the last dive (once we click OK the chronologically last dive will
be selected).
But of course without doing this, our #1 assumption about the dive_table
is broken. The dive_table is supposed to be in chronological order.
Best advice of course would be "don't enter dives out of order" - but of
course that's not realistic.
Fixes#234
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is subtle. Normally you would expect someone to edit the tank data by
simply clicking on it in the equipment tab. But a user could conceivably
edit the tank data after clicking on the profile editing button instead.
This works now as well.
This also addresses the issue that start and end pressure were not shown
in profile editing mode.
Fixes#235
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We remember what was selected before and restore it. Maybe there's a more
"Qt way" of doing this, but my implementation appears to work :-)
Also remove unconditional debug output that snuck into an earlier commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We carefully assembled the correct data in the cylinders - don't replace
that data when manually editing a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the offending commit a QWidget was changed to QTableView, but
only in the header - and thus making avaliable all method calls,
but the initialization of the widgets was still a QWidget, and
nothing of QTableView was used besides an incorrect call to
setColumnHidden.
This commit fixes that by using the view() method provided by the
TableView implementation which returns the true QTableView that should be
used for specific nitpicking, like hidding columns. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously gps information was always overwritten, unless the user had
modified it in the current editing session. This causes problem with
some use cases, like when coordinates are provided before the location
name by the companion app.
Now gps information is only overwritten when it is:
- Empty
- Auto-completed in the current editing session. (When the user hits
accept it is considered hand-edited.)
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This now offers the correct gases for which we have cylinders defined.
For both the planner and add dive we still don't end up with the correct
cylinders in the resulting dive. But that's for another commit to fix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should leave the program in a consistent state after add dive was
cancelled (and do the right thing in case the dive list was empty).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just makes sure that we do the right thing with the staging drive,
that we don't mess up the selection, the we are smart about using our
helper functions, etc.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make the planner work this adds a new column to the Cylinder widget
(depth - for the depth at which we want to change to a certain gas
during deco).
This also tries to hide that column in the equipment view and hide the
start/end pressure columns in the planner view. Oddly that fails :-(
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This caused us to get royally confused when manually adding a dive and
trying to set the location through the marble widget.
Fixes # 229
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to allow the user to provide the gases / cylinders that
she will be diving with. With that information the planner can warn the
user about insufficient gases, but more importantly it can show relevant
gases in the gas select drop down.
Right now the add cylinder button doesn't add a cylinder - that's a
problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user could add a dive, and in the middle click on the 'plan'
button. Since we didn't cared about that on the widget, a lot of
inconsistencies could occour. this fixes that by setting a flag
on the Planner, that has now three modes: nothing, plan and add.
(maybe in the future an edit mode will be valid too.)
If in 'NOTHING' mode, user can enter the addition, edition and
planning. If in any other mode, user can't do a thing. The mode
gets back to NOTHING when user accepts or cancels a plan / add
/ edition.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to make sure that the correct segment has the correct gas assigned
to it - and that those gases are correctly tracked when editing a manually
added dive as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On equipment tab, when editing a cell and then clicking on cancel button,
it would delete all the cylinders table. Now it performs the original
behaviour of recovering the original value of the cell and don't delete
the table.
Signed-off-by: exhora <exhora.tat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also hide ui.CoordinatedLabel when editing a trip,
since ui.coordinates is hidden.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I still wonder if we have all the semantics correct for multi dive
editing. This will need more testing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A custom tag widget has been added to MainTab.
Tags are seperated by a comma ",". The implementation
supports escaping a comma by using "\,".
While typing, the widget supports the user by suggesting
tags using a QCompleter.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
This enables undo for the edit mode on added dives, it uses the
premade backup to fill the old dive with data. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
This patch enables editing a dive that was manually entered,
it doesn't cover dive plans yet because on the plan I need to
figure out what are the 'user-entered' points, and what are
the algorithm point. and I feel lazy. =p
One last thing that's missing is to revert the dive to the
previous condition if the user cancels the edition, currently
canceling and applying ok is the same thing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
I just went thru all of subsurface code removing
some whitespaces issues and trying to make the
code prettyer, I also removed a few QString issues.d
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
After selecting a dive or a series of dives, the "Stats" tab shows the
minimum, average and maximum stats for the selected dives. The "Depth"
section does not display the correct value for the maximum depth.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"Weight" was misspelled "weigth" in several places in the code
and comments.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This means we don't have to new/delete them, which is a waste of
overhead.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This means we can also remove the forward declarations.
This is the first step in removing the memory allocation for the ui
sub-classes. Without the second step, this commit is just making the
compilation time increase for no good reason :-)
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Gtk+ style on the Gnome shell is somewhat broken on Qt for
some reason. This hack pokes the system, checks if it's running
gnome-shell, and if the current style is gtk+ ( I couldn't just
check for gtk+ since it worked on XFCE and other Gtk based enviro
ments. so a double check is needed. ) then I changed the Pallete
of the affected widgets by hand.
not a pretty hack but worked.
[Dirk Hohndel: redid the patch to be simpler and more consistent]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the display of subsurface in smaller
screens by creating ScrollArea containers that are
now englobbing each of the Tab-pages and the Planner
Widget. Some of those widgets were pretty big by the
amount of things on it and it was too big for small
( 14" and 15" ) screens.
This seems to fix it, and looks good both on Gtk+ and
Oxygen styles.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is much better looking in the Oxygen style, and
on the other styles it looks like crap - so let`s not
use that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fix some stuff concerning the pretyness of subsurface while running
on Gnome and XFCE enviroments. This is the kind of stuff that I
really didn`t want to put on the code but sometimes it`s for the
best. this makes the MainTab much more bearable. There are still
things to fix, like the size and positioning of some of the icons.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This code hooks the plus button on both cylinders and
weigthsystem tables to trigger the enableEdition() and
thus the work done when you click on + will be saved /
discarted when the user cancels the plan or accepts it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This bit of magic actually performs the save on the
dive list for the changed weigths and cylinders,
it will set the cylinders only if there's a change
on the cylinder model, and it will set the weight
only if there's a change in the weigth model.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The old code marked the dive list as changed on any
of the changes in the model, this was incorrect since
the user could just cancel the edition, wich means
that the divelist shouldn't be marked as changed at all.
when the user clicks on'accept', and the item is indeed
changed on the dive list, then we mark_divelist_changed
to TRUE
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch enables edition on the selected dives as soon
the user press delete or any other column on the Cylinder
/ weigthsystem.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch enables canceling the edition of cylinders and weigth
systems, as soon as the user press cancel, the old values are
re-populated on all selected entries.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This creates a placeholder for the equipment edition,
it will ease the 'revert' and 'apply' when editing
multi dives.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
One more corner case that we cover correctly.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This solves the odd case when closing the data file that clicking in the
info widget caused the input fields to respond and the little warning icon
to show up.
Also some minor whitespace cleanup for readability.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This mostly happens with no XML file or when closing the current XML file.
Sadly the user still can click on the empty date field (even if nothing
else is active on the screen) and a date reappears.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only look up the dive number of a previous dive if there is a previous
dive.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the close action is triggered while there is no current dive (empty
history), the info widget is enabled. To avoid this behavior, we only
enable the info widget during update if the dive index is valid.
Signed-off-by: Alexandre Dupas <alexandre.dupas@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add two more rows to the widget - this is getting quite busy.
There still is some weirdness where the focus isn't returned where it
should be and a few other details, but overall getting there.
Added helper functions to parse a temperature and to deal with the
timezone offset - with that latter one I also fixed the time offset bug in
the planner.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If this is the last dive and if the previous dive had a number, give this
dive the next number.
Of course there are a couple of issues with the current implementation. We
have no way of changing the date / time of the added dive, so we KNOW that
it will be the last one. But I put that check there so that once we add
the ability to change the date / time (and hopefully remember to then move
the dive to the correct spot in the dive_table), we only assign a number
if it is the last dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was surprisingly easy - which of course has me worried that I'm
missing something that I should do when cancelling out of this dialog.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gets things mostly right.
It creates a dive and uses the planner widget to create samples which are
copied into the dive. It fills in some reasonable defaults (DC model,
timestamp), but doesn't allow editing the timestamp (or the temperatures
and air pressure).
On accept the planner gets reset and the dive appears correctly in the
dive list.
Cancel still needs to be handled.
And I bet there are many subtle bugs lurking here and there. But it's a
start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Reset coordinates properly when clicking undo.
When auto-completing location, only copy coordinates if they have not
been manually edited.
Set the background to red if the gps coordinates won't change, e.g.
there is a parse error, the change is too small or only whitespace
changes.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the Message and the ok/cancel buttons on the Equipment
Tab, they don't control the Equipment edition yet, but already
does the same as the Notes one, Now I need to merge the other
part - the actuall Equipment Edition.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Adds a Warning icon on the changed tabs, this is important as
usability, for you could change something on the 'notes' tab,
change the tab and did't realized that something was changed
( by forgotting or something ), then clicking on the cancel
button. so now there's a friendly reminder that you actually
changed something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Some cleanup was needed in the MainTab code for ages,
now the Edition / Cancel / Ok of the Notes tab is
way more intuitive on the code level.
This is needed to support multidive edition on the
Cylinders and Weigths too, since it's a bit more
complicated, I didn't want to start with a Spaguetti
Code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Coordinates are copied when auto-completing location, they are also
displayed and editable in maintab.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Merged the shared code for the three table views into
one code, this way less code is needed if we need to
construct another tableview in the future.
I still need to clean some of the models too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Made the tableviews share a bit of code, and code cleanup.
The tableviews for Cylinders, Weigth and Dive Planner Points
now shares the CSS and I also implemented the save / load
methods for the dive planner points, so the functionality
is mostly done on the vieualization side. - since we are
now using three tables maybe it's a better idea to create
one class SubSurfaceTable that knows how to handle saving
/ loading of the columns... TODO for the future. ;)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a bit of code cleanup that I'm not sure that will
pass, since it's all macro-based, but I don't have a thing
against macros at all. Sometimes they helps us keep a better
and cleaner code base. I think I managed to remove around 120
lines of code, wich isn't much, but I replaced it by 14. and the
code is now easyer to maintain, so hooray.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Change the background color of edited parts of the dive
on the interface. Specially util if you are editing multi
dives in a single step, and went to eat something or did
anything else for five minutes, then come back and don't
quite remember what did you changed. now it's in a cute
yellowish background.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch enables multi dive editing on the selected
dives. It's a bit of big patch where I reworked how it
worked since it was written just for a single dive.
this means that this can introduce bugs - I'v tested it
quite a bit but a thing could slip thru my fingers. :)
How this is supposed to work:
Select a few dives that you want ( one or more ) then
click on the field that you wanna edit / multi edit, and
press 'accept'. *only* the edited field will be modified
thru all dives.
Next patch - I'll change the bg color of the edited fields.A
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed a bug where the auto-completion would not work via command
line, I fixed it by reloading the information of dives when a
dive file is open via command line or via UI.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added completion for buddy, divemaster, location and suit.
The completions uses some models that I created in the last
commit - everytime that a divelog file is loaded, it creates
a list of completion items.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patches fixes showing back the labels 'Dive master' and 'Buddy'
after a trip selection was done, then back to single dive selection.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch makes the auto editon behave in a better way,
now you can scroll the notes widget without marking it as
editable, and also adds a bit of code cleanup, and a better
logic for editing the other widgets.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a linus request, adds a Single-click edition
on the tableview to make it more consistent with the
rest of the interface where edition is permitted.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
1) Make a call mark_divelist_changed(TRUE) when the user adds new
cylinder or weight entries.
2) Call mark_divelist_changed(FALSE) in
MainWindow::on_actionClose_triggered() so that each time after
a file is closed or a new one is created it does not ask immediately
the user for a save confirmation for the blank file/divelist.
3) Call mark_divelist_changed(TRUE) once a dive's geo location
has changed in GlobeGPS::changeDiveGeoPosition().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are a couple of problems with said icons:
- When the Equip. tab is first seen, no relative event is monitored
so that the correct position is updated and the icons are positioned.
To solve that we connect the signal MainTab::currentChanged(int)
and call MainTab::equipmentPlusUpdate().
- When the info-profile QSplitter resizes with a snap towards/from
the edges of the main window, no resize handler is called such as
MainTab::resizeEvent().
A solution is to monitor the resize of the info-profile splitter
with MainWindow::on_infoProfileSplitter_splitterMoved() and again
call MainTab::equipmentPlusUpdate()
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch saves / restores the sizes of the columns in the cylinders
and weigth table widgets, so everything is now properly behaved. There
's still other things to do - but I'm tired. i's sunday and there's a
protest against the brazilian government to go.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make the columns on Cylinders edit and Wheight Edit to
have sane values for 'type', this is needed because the
old behavior was to set it fixed size, and the default fixed
size was silly. this calculates a good predefined value
taking the font size in consideration.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
