Subsurface - an Open Source Divelog
===================================

In fall of 2011, when a forced lull in kernel development gave him an
opportunity to start on a new endeavor, Linus Torvalds decided to tackle
his frustration with the lack of decent divelog software on Linux.

Subsurface is the result of the work of him and a team of developers
since then.

License: GPLv2

Subsurface can be found at http://subsurface.hohndel.org

You can get the latest sources from the git repository:

git clone git://subsurface.hohndel.org/subsurface.git .

or

git clone http://subsurface.hohndel.org/subsurface.git .

You can also browse the sources via gitweb.


Building subsurface under Linux
-------------------------------
You need libxml2-devel, gtk2-devel, glib-2.0 and gconf2-devel to build
this (and libusb-1.0 if you have libdivecomputer built with it, but then
you obviously already have it installed). Check with your Linux
distribution how to install these packages.

On Debian the package names are different; try libxml2-dev libgtk2.0-dev
glib-2.0 libgconf2-dev, but it seems the cairo package at least in
Squeeze is too old.

You also need to have libdivecomputer version 0.2 installed, which goes
something like this:

git clone \
git://libdivecomputer.git.sourceforge.net/gitroot/libdivecomputer/libdivecomputer
cd libdivecomputer
git checkout v0.2.0
autoreconf --install
./configure
make
sudo make install

NOTE! Sometimes you may need to tell the main Subsurface Makefile where
you installed libdivecomputer; pkg-config for libdivecomputer doesn't
always work unless the project has been installed by the distro.

Just edit the makefile directly.


Building Subsurface under Windows
---------------------------------
Subsurface builds nicely with MinGW – the official builds are done as
cross builds under Linux (currently on Fedora 17). A shell script to do
that (plus the .nsi file to create the installer with makensis) are
included in the packaging/Windows directory.

The best way to get libdivecomputer to build appears to be

mingw32-configure
mingw32-make
sudo mingw32-make install

Once you have built and installed libdivecomputer you can use

sh packaging/Windows/mingw-make.sh

to then build subsurface.

Building subsurface on a Mac
----------------------------
Install MacPorts and install the dependencies from MacPorts:
sudo port install gtk2 +no_x11 +quartz -x11 libusb gtk-osx-application \
     automake autoconf libtool

Install libdivecomputer:
git clone git://libdivecomputer.git.sourceforge.net/gitroot/libdivecomputer/libdivecomputer
cd libdivecomputer
autoreconf --install
LIBUSB_CFLAGS=-I/opt/local/include ./configure
make
sudo make install

Install subsurface:
git clone git://subsurface.hohndel.org/subsurface.git
cd subsurface
PKG_CONFIG_PATH="/usr/local/lib/pkgconfig/" make
sudo make install-macosx

More instructions on how to create a Subsurface DMG can be found in
packaging/macosx/README


Usage:
======

Install and start from the desktop (or you can run it locally from the
build directory).

./subsurface

You can give a data file as command line argument, or Subsurface picks a
default file for you when started from the desktop or with out an
argument.

If you have a dive computer supported by libdivecomputer, you can just
select "Download from Divecomputer" from the Log menu, tell it what dive
computer you have (and where it is connected if you need to), and hit
"OK".

NOTE! There are often multiple models of dive computers that import
exactly the same way.  If you have a Suunto Gekko, for example, the
import function works fine - even if you don't find the Gekko listed
explicitly.  It has the same import engine as the older Suunto Vyper
(not "Vyper Air").

So check the (incomplete?) list of supported dive computers below, and
see which ones show up together.  If you have the "Aeris Elite T3", for
example, you'd notice that it's in the same group with the "Oceanic Atom
2", and use that choice to import.

Suunto:

 * Solution

 * Eon, Solution Alpha and Solution Nitrox/Vario

 * Vyper, Cobra, Vytec, Vytec DS, D3, Spyder, Gekko, Mosquito, Stinger and Zoop

 * Vyper2, Cobra2, Cobra3, Vyper Air and HelO2

 * D9, D6 and D4

Uwatec:

 * Aladin

 * Memomouse

 * Smart and Galileo (infrared)

Reefnet:

 * Sensus

 * Sensus Pro

 * Sensus Ultra

Oceanic, Aeris, Sherwood, Hollis, Genesis and Tusa (Pelagic):

 * VT Pro, Versa Pro, Pro Plus 2, Wisdom, Atmos 2, Atmos AI, Atmos
Elite, ...

 * Veo 250, Veo 180Nx, XR2, React Pro, DG02, Insight, ...

 * Atom 2.0, VT3, Datamask, Geo, Geo 2.0, Veo 2.0, Veo 3.0, Pro Plus 2.1,
Compumask, Elite T3, Epic, Manta, IQ-900 (Zen), IQ-950 (Zen Air),
IQ-750 (Element II), ...

Mares:

 * Nemo, Nemo Excel, Nemo Apneist, ...

 * Puck, Puck Air, Nemo Air, Nemo Wide, ...

 * Icon HD

Heinrichs Weikamp:

 * OSTC, OSTC Mk.2 and OSTC 2N

Cressi, Zeagle and Mares (Seiko):

 * Edy, Nemo Sport

 * N2iTiON3

Atomic Aquatics:

 * Cobalt


More detailed end user instructions can be found at Documentation/user-manual.html


Contributing:
-------------

There is a mailing list for developers: subsurface@hohndel.org
Go to http://lists.hohndel.org/cgi-bin/mailman/listinfo/subsurface
to subscribe.

If you want to contribute code, please either send signed-off patches or
a pull request with signed-off commits.  If you don't sign off on them,
we will not accept them. This means adding a line that says
"Signed-off-by: Name <email>" at the end of each commit, indicating that
you wrote the code and have the right to pass it on as an open source
patch.

See: http://gerrit.googlecode.com/svn/documentation/2.0/user-signedoffby.html

Also, please write good git commit messages.  A good commit message
looks like this:

	Header line: explaining the commit in one line

	Body of commit message is a few lines of text, explaining things
	in more detail, possibly giving some background about the issue
	being fixed, etc etc.

	The body of the commit message can be several paragraphs, and
	please do proper word-wrap and keep columns shorter than about
	74 characters or so. That way "git log" will show things
	nicely even when it's indented.

	Reported-by: whoever-reported-it
	Signed-off-by: Your Name <youremail@yourhost.com>

where that header line really should be meaningful, and really should be
just one line.  That header line is what is shown by tools like gitk and
shortlog, and should summarize the change in one readable line of text,
independently of the longer explanation.



CREDITS:
========

This file was originally started by Linus.
The initial instructions for building on a Mac were provided by Henrik Brautaset Aronsen
Jef Driessen helped creating the cross-building instructions for Windows