As usual, I am not the author, just the person pulling from Transifex.
Authorship is tracked there (rather badly).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is very much the same as in commit dc03b7e7d6 ("We need the correct
context to translate event names"). I didn't pay enough attention when
reading the bug report and missed that the weight system names were also
not correctly translated.
Fixes#312
(I hope this time for real)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I have added a section about importing dives from other electronic
sources. There are some potential problems, because I know that the
intercation with divelogs.de is not yet fully functional
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing air or water temperature, you are actually editing the
information in the active divecomputer structure. But the Dive Info shows
the summary data created from the temperature data in all dive computers.
For most people who will only ever have one divecomputer per dive this may
seem like an artificial distinction, but it's very important if you track
more than one computer.
So in order to have an edit reflected in what's shown, we must redo the
"summary creation" for data from the different divecomputers into the
summary fields of the dive.
Fixes#313
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt assumes that all strings are in the context of the class in which you
use them. So when we want to display the translated event names from
within the ProfileGraphicsView we need to make it explicit that these are
strings that come from the C part of the code.
Doing that showed another bug in the code where we foolishly compared the
translated text to a fixed string. Not smart.
Fixes#312
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Again, the author credit to me is wrong. I only did some of the German
translations. Everything else has authorship tracked on Transifex.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface creates a lot of singleton instances on demand, but nothing
ever deleted them. Since they are singletons, these memory allocations
are technically not leaks. However, they clutter the output in valgrind
and other memory analysers, hiding the real issues.
The solution is to delete these items at exit. For the models and for
gettextFromC, the solution is to use a QScopedPointer, which will delete
its payload when it gets destroyed. For the dialogs and other widgets,
we can't do that: they need to be deleted before QApplication exits, so
we just set the parent in all of them to the main window.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Found by Dr. Memory, run by Lubomir:
Error #48: UNINITIALIZED READ: reading register al
# 0 StarWidget::mouseReleaseEvent() [qt-ui/starwidget.cpp:29]
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Hide the sizeing sliders from PrintOptions. we don't really
support any of those in PrintLayout and these are not that
useful and easy to implement, until some sort
of layouting/templating system is in place.
- Move the 'Print' button on top as a workaround, since if
it's bellow the print options it stays bellow an empty area
where the now hidden sizing sliders are.
- Resize the dialog to a smaller size
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Make it consistent with other application dialogs.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The translatable string in about dialog is truncated at the
VERSION_STRING. Thus it has to be given as argument to the tr function.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When there are no trips at all, we have to skip the Yearly statistics
alltogether, including the header line (that should display all the
dives added together).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now only use a slightly large font for the "Dive #" entry.
All other font sizes remain at 9px.
Another change is that we now attempt to use 11px for
individual row height. This makes the table at least 12px bigger
(n_rows * increment), but does not cut letters like 'g',
which go slightly bellow the font baseline.
Perhaps this can be improved later by adjusting the font
and row sizes again.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
nr was used but never initialized.
Also, the code removed used select_dive had likely just been forgotten to
be removed when the correct code using selectDive() was added a little
later in the function.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
c++ have some idea about in what order things should be initialized.
This makes us comply with that order.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the same case for the first letter in the dive table column headers,
use '%' for both gases in the planner, and show "Start time" instead of
"Starttime".
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "air / water Temperatures" label didn't look to good.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While playing with the ruler, I figured that it happened only once that
my minimum speed was not 0 for a segment long enough to get any display.
And it was a "dive" in an hyperbaric chamber...
This patch replaces the minimum speed with the maximum descent speed and
the maximum speed with the maximum ascent speed.
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We update the values for divemaster, buddy and etc...
Rating and visibility are currently displayed as "x / 5"
values.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Following the new layout for the profile print, we separate
the used gas like so:
AL80 / EAN33 / ...
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
There is not enough space for the last column in "6 print"
even for the english text. This gives more space extending
the row, but for some languages it will be an issue, thus
strings have to be eventually shortened by the translators.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
ProfilePrintPmode::truncateString() was not really needed,
because long text *should* be trunctated by the table itself.
Also we now are going to have multiple lines for notes,
so the auto-trim should work.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Since some early bird thought it was a good idea to force the rest of us
to get up early by changing our clocks during summer, we can not use the
currentDateTime() to determine the timezone offset for all dives.
Instead, we just pretend that everything is in UTC and avoid doing the
offset calculations.
If only that early bird knew that if clocks stayed consistent throughout
the year then I could be asleep instead of fixing this in the middle of
the night..
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply clear the edited dive (regardless of whether it's set) and hide the
message if visible. The previous code was a little too convoluted...
Fixes#305
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need the marble data to go into a subdirectory of /usr/share/subsurface
and we need to search for both data and marbledata when trying to find the
theme.
Fixes#310
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
