The undo system sets updates individual dive fields on
redo respectively undo. Make salinity such a field, since
it is changed on replanning a dive.
To do this, break out the "update salinity" functionality
into its own function, add an entry to the DiveField enum
and add the corresponding switch-case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since requiring Qt >= 5.9.1, we can use the pointer-to-member-function
overloads of addAction (introduced in Qt 5.6). This has the advantage
of compile-time checking of the signal/slot parameters.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The plan is to make the model the authoritative source of
the imported dives. Therefore, access the number of
downloaded dives from there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Clearing the table in the thread leaves the model in an inconsistent
state. Don't do that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing dives, consume the tables from DiveImportedModel
and not the DownloadThread. This appears more logical and avoids
an inconsistent state of the DiveImportedModel: On import the
tables would be reset, but the DiveImportedModel wasn't
informed of that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DownloadFromDCWidget::on_ok_clicked() deselected dives were
directly deleted from the dive table, leaving DiveImportedModel
in an inconsistent state. Use the function in DiveImportedModel
instead. This also removes code duplication.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, desktop and mobile are accessing the DownloadThread
and the DiveImportedModel concurrently. This makes a big data
flow mess. To achieve a more hierarchical data flow, start
by making the DownloadThread a subobject of DiveImportedModel.
Start the download by calling a function in DiveImportedModel.
Route the finished signal through DiveImportedModel. Thus,
the model can reload itself with the new data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way we handle singletons in QML, QML insists on allocating the
objects. This leads to a very idiosyncratic way of handling
singletons: The global instance pointer is set in the constructor.
Unify all these by implementing a "SillySingleton" template. All
of the weird singleton-classes can derive from this template and
don't have to bother with reimplementing the instance() function
with all the safety-checks, etc.
This serves firstly as documentation but also improves debugging
as we will now see wanted and unwanted creation and destruction
of these weird singletons.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In stats tab, when only one dive is selected, on one stat, only average is
shown, except temperature which 3 same temps for max, min and avg are shown.
[Dirk Hohndel: fixed whitespace]
Signed-off-by: Fabio Rueda <avances123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In dive site mode, export selected dive sites, not dive sites
of selected dives.
Fixes#2275.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In TabDiveSite::selectedDiveSites(), the QItemSelectionModel::
selectedIndexes() function was used. Thus for every selected
dive site 8 entries were added to the return-vector!
Instead, use the QItemSelectionModel::selectedRows() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When exporting dive sites, the dive sites to be selected were collected
in the C-core. But that doesn't have access to the selected dive sites
if in dive site mode. Therefore, collect the dive sites in C++ and
pass down to the core. Use a std::vector to avoid memory management
woes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylindersObject list was only used by grantlee but not by
the mobile code. Since it is quite heavy, split it out and thus
don't generate it for every dive on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of handing a reference-to-dive to QML, prerender all the needed
properties and store them as values in DiveObjectHelper. Exception:
- date(): generated from timestamp
- time(): generated from timestamp
- cylinderList(): does not depend on dive anyway and should be made
static.
This hopefully avoids the random mobile crashes that we are seeing.
Clearly, this code needs to be optimized, but it is a start.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveObjectHelper is a tiny wrapper around dive * to allow access
to dive data from QML and grantlee. It doesn't have to be a
full-fledged QObject with support for signals, etc. Therefore,
turn it into a Q_GADGET based object. This allows us passing the
object around as object, not as pointer to DiveObjectHelper.
This makes memory-management distinctly easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This way we can view the html generated from a print template, for
debugging, validation or printing via your favorite browser.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
When gas switching only on stops is selected, the notes
showed an extra line at the not realized stop depth. This
eliminates it. It also makes sure there are no 0 second
spurious entries. And gas switching takes more than zero
time (otherwise we would have to print a line of zero
duration for at the gas switch depth).
Reported-by: tormento <turment@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The setting of the disclaimer variable was removed inadvertently
some time ago, which removed the disclaimer from the printed plan.
Instead, introduce a function that returns the disclaimer with
the current deco mode. Use that function to generate the dive
notes and for printing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The application could be crashed by
1) Create dive site
2) Edit dive site
3) Undo until dive site is removed
4) Continue editing now non-existing dive site
Therefore, hook into the dive-site-deleted signal and if the
currently edited dive site is deleted, close the widget.
When closing the widget, make sure that the potentially
dangling pointer is reset to zero so that there is no
other potential use-after-free bug.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is the alternative MapWidget::reload() function, which
centers on the selected dive-site.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For historic reasons MapWidget::repopulateLabels() was called
in LocationInformationWidget::acceptChanges(). This should not
be necessary anymore, as this is done when entering/exiting
dive-site-mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The LocationInformationWidget repopulated the map labels if the name
or location of a site changed. This is unnecessary because the
MapLocationModel catches these signals itself. Remove these calls.
As an added bonus, calling repopulateLabels() in QML context leads
to crashes later on. Therefore this should fix at least one
crash condition when dragging a flag on the map while the
dive-site-edit-tab is shown.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing the dive site, for certain fields a divesChanged signal
was emitted so that the dive-list can be updated.
Arguably it is wrong to decide which fields are relevant to the
dive list in the undo-command code. Therefore, let the list
catch the dive-site-edited signal and decide itself.
But the actual reason for this commit is that if the dive-site
field of a dive changes, we might have to reload the dive-location-model
because suddenly a new dive site appears. Now if this is done
in QML context on some Qt version (notably 5.9) we get crashes
later on. But that can happen if the user moves a flag. So in that
case only send a diveSiteChanged signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since changing the highlighting to use the selected dive, dive
sites with no dive were never highlighted in dive site mode.
Obviously, because there was no dive to be selected.
Therefore special-case all dive-site selection code to recognize
when we are in dive site mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one-liner was called in only one place from the same class.
Just fold it into the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Owing to the recent changes, when the selection flag in the
MapLocationModel was not updated correctly when the user
manually selected the dive. Do that before raising the
divesSelected signal in DiveListView::selectionChanged()
because that will cause the MainWindow to repaint the flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When clicking a dive site on the map, the QML code would set
the selected dive site, but then all dives of dive sites in
the vicinity were set. But still only the clicked-on dive site
was shown.
Therefore, don't set the list of selected dive sites in QML,
but later in DiveListView::selectDives(), where we know all
the dives that were selected.
This, again, gives nasty entanglement of diverse widgets and
models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changing the selection the MapLocationModel was reset.
This lead to crashes on Qt-5.9 which are due to QML accessing
data that was freed during model reset. This putative Qt bug
doesn't happen on newer Qt versions. At least Qt-5.12 is known
to work.
Instead of fighting the bug, let's simply not reset the model
but send a dataChanged() for every element of the MapLocationModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In MainWindow::refreshDisplay() with doRecreateDiveList=true
the map was reset before the dive list was recreated. This
makes no sense and only worked because the map was reloaded
again when a dive in the list was selected.
Reload the map after recreating the dive list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Experimentation has shown that the image of a flag will
only be changed after dataChanged() if it is a simple
property. The old code had a complex QML expression and
then - for some reason - it didn't work.
To give us better control over the flags and avoid full
reloads of the map therefore introduce a model-property
pixmap name. The name depends on whether the site is
selected and if not, whether we are in divesite-edit mode.
This makes the code rather convoluted. Firstly, we have
to save whether the site is selected in the map-item.
Secondly we have to access the global map-widget, which
in turn has to go to the map-widget helper (layering
violation!).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To recognize HTML-notes the text was scanned for <div> tags. But
apparently the planner notes do not feature such a thing. Therefore
extend recognition of HTML to <table> tags.
Note we can't use the <html> or <span> tags, because these are
*always* produced by the QTextEdit::toHtml() function.
Fixes#2265
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replaces some enums with names that do not clash with windows #defines.
Specifically:
ERROR -> ERRORED, PASCAL->PASCALS, IGNORE->IGNORED,FLOAT->FLOATVAL
Signed-off-by: Paul Buxton <paulbuxton.mail@googlemail.com>
The constructor of PasteState was clearing an uninitialized
weightsystem-table. Very silly. Initialize it instead.
Fixes#2253
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
CylinderObjectHelper is used for structured formatting of cylinder
values in grantlee types. Instead of keeping a reference to a
cylinder, turn it into a value type containing the formatted strings.
This should be distinctly safer, as we don't risk having stale
references flying around. Moreover, we don't have to use pointers
but can use containers containing plain CylinderObjectHelper. Thus,
no explicit memory management is needed, making the code distinctly
easier to understand.
Sadly, currently grantlee does not support Q_GADGET based Q_PROPERTY.
Therefore a GRANTLEE_*_LOOKUP block has to be added. This can be
removed in due course, as a patch to remedy this issue is in current
grantlee master.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
But don't show our cloud storage entry (as that is already in the File menu,
anyway).
This is extremely useful because while you can manually enter a file name to
save to (and therefore can use the 'magic' git repo syntax), on most OSs there
is no way to enter that non-existing 'file name' (which is the git branch in
square brackets) in the file open dialog.
Fixes: #2236
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A number of architecture-dependent functions were declared in
dive.h. Move them to file.h so that not all file-manipulating
translation units have to include dive.h. This is a small step
in avoiding mass-recompilation on every change to dive.h
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the main tab, the trip time was not shown when switching to
a trip. Implement showing of the trip date in a function, as the
undo-code will also have to update the trip date in certain
circumstances.
Fixes#2207
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This button only closes the filter panel but doesn't clear it.
Reported-by: Adric Norris <landstander668@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The weightsystem_equal() function compares weightsystems of two dives
to decide whether the "commit changes" message should be shown and
to decide which dives are edited when changing multiple dives.
Due to an index mixup the function returned wrong results for
more than two weightsystems. Fix it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When pressing F2 in the dive list, the number can be edited.
Make this action undoable by implementing a EditNumber command.
This command is differs from the other undo commands, as not the
currently selected dives are changed. This means that the EditCommand
needs an alternative constructor taking a single dive. This constructor
was implemented in the base class so that all edit commands can now
be called with a single dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the fixed-size weightsystem table by a dynamically
relocated table. Reuse the table-macros used in other parts
of the code.
The table stores weightsystem entries, not pointers to
weightsystems. Thus, ownership of the description string is
taken when adding a weightsystem. An extra function adds
a cloned weightsystem at the end of the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
per_cylinder_mean_depth() and selected_dives_gas_parts() are used
in the dive-information and statistics tab, respectively. Nevertheless,
these functions are called on the main tab as well and the result is
trashed. Therefore remove the calls. Must have been an artifact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Another tiny step in making dive.h smaller: move function
declarations to deco.h if these functions are defined in deco.c
and don't directly concern dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
qt-models/models.h included dive.h and divelist.h. Remove these
unnecessary includes, to reduce interdependencies. A drop in the
bucket, for sure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Changed the Qt Layout for FilterWidget2 to "Lay Out on a Grid" to
allow the scrollarea to adjust when the height of FilterWidget2
changes. Fixes issues #2174.
Signed-off-by: Doug Junkins <junkins@foghead.com>
If no dive is set, all fields except the note field were cleared.
Also clear notes.
Fixes#2172
Reported-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the preferences widget warn the user when they enter a non-executable
path to ffmpeg. Thus they don't have to start thumbnailing just to
find out that the path is wrong.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When switching to a BT dive computer, the device selection dialog is opened,
when switching away from BT, the device address is set.
Fixes#2139
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clearing dive site did not work for two reasons:
1) We didn't get a signal when editing was finished.
2) When clearing the dive site, the "add new dive site" site was set.
Thus, connect to the editingFinished signal and in
DiveLocationLineEdit::currDiveSite() return a null pointer if
the string is empty.
This means that it is not possible to have a dive site with an
empty string, but that shouldn't be a problem, right?
Fixes#2148
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 2e230da361 the dive-selection signals
were unified. Sadly, this was done in a suboptimal way resulting in
numerous calls to updateDiveInfo(), which refreshes the main-tab.
Firstly, the MainWindow connected to selection changes from both,
the undo-command and the divelist. Secondly, every selected dive
in the divelist caused a single signal.
Thus, connect only to the divelist (this is necessary for user-initiated
selection changes) and only send a single signal in the divelist
per selection-reset.
This is still less than perfect as updateDiveInfo() is called even
if the current dive doesn't change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On merging, don't use the number of the first dive if it is 0.
Use the first non-zero number.
Fixes#2126
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This way we don't need to iteratively grow the QVector.
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now when we change dive site location or name through a redo, the flags and
associated name are always reflected correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were shifting in the wrong direction. Which caused the field to be marked as
'edited' again, which meant we shifted the wrong way and twice the distance.
This seems to fix the problem for both date and time editing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For historic reasons, there where three distinct signals concerning
dive-selection from the undo-machinery:
1) divesSelected: sent newly selected dives
2) currentDiveChanged: sent if the current dive changed
3) selectionChanged: sent at the end of a command if either the selection
or the current dive changed
Since now the undo-commands do a full reset of the selection, merge these
three signals into a single signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since all commands now fully reset the selection, there is no point
in keeping track of whether the selection changed on addition or
removal of dives. This can be done in the function that sets the
selection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some commands tried to retain the current selection on undo/redo,
others set the selection to the modified dives.
The latter was introduced because it was easier in some cases, but
it is probably more user-friendly because the user gets feedback
on the change.
Therefore, unify to always select the affected dives on undo()/redo().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the default view is batched by trips, signals were sent trip-wise.
This seemed like a good idea at first, but when more and more parts used
these signals, it became a burden. Therefore push the batching to the
part of the code where it is needed: the trip view.
The divesAdded and divesDeleted are not yet converted, because these
are combined with trip addition/deletion. This should also be detangled,
but not now.
Since the dive-lists were sorted in the processByTrip function, the
dive-list model now does its own sorting. This will have to be
audited.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of calling into the planner, simply create the dive computer
information right there, using the existing helper function we have to
create simple profiles.
Fixes#2128
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In signals dives were sorted by date. This criterion is not be unique.
Therefore sort by the dive_less_than() function of the core to avoid
any inconsistencies between the Qt-models and the core data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make dive.h a bit slimmer. It's only a drop in the bucket - but at
least when modifying tag functions not the *whole* application is
rebuilt anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When a different field is edited, hide any old multi-dive-edit
warning message. The reason is that we might want to add an "undo"
button to the message. But this will undo the wrong command if
we don't hide the message.
Sadly, this means that we can't use animated show / hide, because
an animatedHide() followed immediately by an animatedShow() does
not necessarily show the message. In other words, and animatedShow()
does not interupt a started animatedHide()!?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The multiple-dives-edited message was shown even if the value was
not changed. Notably, when tab-flipping through the dive fields.
Therefore, changed the execute_edit() function to return zero
when no command was executed. For this, return a boolean from
the execute() function indicating whether the command was really
executed or trashed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the MainTab, warn if more than one dive was edited. To this purpose,
add a new KMessageWidget with an "OK" button that closes the message.
Code is mostly a copy of the already existing "Editing dive" message.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a pointless one-liner function. Let's remove it. The
message it shows will probably be moved to the profile in the
not-so-distant future anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To enable a "multiple dives edited" message, return the number
of edited dives from dive edit undo commands. Since there are
two kinds of these commands, viz. normal fields and tag fields,
and the former use templates, create a common base class that
can return the number of dives. Yes, the class hierarchy is
getting scarily deep! At least, this gives a tiny bit of
code-reuse.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When tabbing through the dive-info fields we get *EditingFinished
signals. This would create undo commands. The undo commands should
recognize if nothing changed. But for the temperature fields,
owing to rounding, an unchanged text could actually represent a
different value.
This would lead to very confusing situations:
1) Edit air temperature
2) Press tab to finish editing
3) Focus goes to water temperature
4) Try to undo change in menu
5) When opening the menu water temperature loses focus
6) Water temperature is edited
7) Undo undos the water temperature, not the air temperature
8) Goto 4
Fortunately, QLineEdit fields have the isModified() member function
that returns true if the field was changed by the user. Use
this to prevent this case. This is not a general method, i.e.
it has to applied to every field with that problem. But it is
less intrusive than subclassing the QLineEdit class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The PIMPL idiom is used by some frameworks (notably Qt) to
ensure binary compatibility. Objects consist only the general
object header (ref-count, connections, children, etc..) plus
a single pointer to private data.
MinMaxAvgWidget was implemented using this idiom. This seems
to make no sense, as we don't produce a general library with
the need of a stable ABI. Let's remove this unnecessary
indirection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Owing to the recent undo-changes, the git id was not invalidated
when accepting changes to cylinders and weights.
Do this in the MODIFY_DIVES macro for now.
Reported-by: Jan Iversen <jani@apache.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The location fields are hidden in trip mode. Only the location-popup
button was shown. Hide it as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A regular expression was generated and then copied twice without
apparent reason. Remove these copies.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
preprocessTemplate() replaces variables of the kind "dive.weight0"
by "dive.weights.0". Replace the old code by regexps. This not
only makes the code significantly shorter, it also makes it independent
from the name of the dive variable (i.e. "dive").
Moreover, it removes a dependency on MAX_WEIGHTSYSTEMS and MAX_CYLINDERS,
which might help in removing these restrictions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some users understood "Configure dive computer" as the
menu entry where you configure which dive computer to
use. Reworded to make clear that this modifies the
settings on the dive computer.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When deleting a dive computer, don't just show the first
dive computer, but the next one in the list (if it exists).
Moreover, on undo jump to the previously shown dive computer.
Do this by keeping track of the before and after dive computer
number in the undo command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function clones a dive and clear out the old dive. This
corresponds to move semantics. Name the function accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is just minor fixes that are not user-visible:
Fix a few erroneous comments and a debug message. These are
copy & paste mistakes and mistakes introduced during code-
refactoring.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of the elegant solution that just modifies the dive,
keep two copies and add either the old or the new copy. This
is primitive, but it trivially keeps the dives in the right order.
The order might change on renumbering the dive computers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Recently, the undo code was changed to consider dive sites.
The undo code uses a DiveToAdd structure, which was extended
by the dive site to which the dive should be added.
The split and merge commands were not adapted and therefore
the dive counts of the dive sites were wrong after split
and merge.
Fix this by properly setting the dive site field and removing
the reference in the dive structure (in the split case, the merge
case already cleared the reference).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 5729f93e1f, the dive addition /
deletion code was simplified in that indexes were calculated on
the fly. This made it, in principle, possible to pass in dives
in any order.
But there was a small oversight: the recipients of the dives-added
and dives-deleted signals expect the dives to be sorted as in
the core list. Only then will the lists be consistent.
Therefore, sort the lists before adding / deleting dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The units.h file has two functions to convert atm pressure to mbar
and also to convert mbar to atm pressure. Implement these two
functions in the planner.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
The Information tab shows the atmospheric pressure. Make this value editable
and also ensure that changes to it are undo-able.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
The way the application state would enable/disable widgets was very
"dynamic". A property-list would be generated and put in a set
of arrays. Very hard to figure out what is going on.
Replace these property-list by flags and explicit old-fashioned boolean
expressions.
Join the two arrays (widget- and property-lists) into an array of
a unified data structure.
Replace the macro that sets the widgets by a simple static function.
Factor out the four loops that added widgets to the quadrants into
a simple static function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The application state was encoded in a QByteArray. Thus, there was
no compile-time checking. Typos would lead to silent failures.
Turn the application state into an enum. Use the enum-class construct,
so that the values don't polute the global namespace. Moreover,
this makes them strongly typed, i.e. they don't auto-convert to
integers.
A disadvantage is that the enums now have to be cast to int
explicitly when used to index an array.
Replace two hash-maps in MainWindow to arrays of fixed sizes.
Move the application-state details into their own files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the main dive tab, add a button that opens the dive-site selection
widget showing all dive sites. This is done by setting the "temporary
dive site name" to the empty string. Thus no dive sites are filtered
and the "add new dive site" entries are not shown. Moreover, the
text is selected. The user can therefore immediately start typing to
activate the filter or enter the name of a new dive site.
The idea is that after downloading dives with GPS information the
user can select one of the close dive sites.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveLocationLineEdit::showPopup() called the functions
- fixPopupPosition()
- proxy->invalidate()
- proxy->sort(LocationInformationModel::NAME)
- view->show()
All these calls are redundant, as they are already performed by
setTemporaryDiveSiteName(). Remove them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, in the dive-site selection widget the distance to
the dive site of the current dive is shown. Instead, use the
recently introduced dive_get_gps_location() function. Thus,
the actual GPS coordinates extracted by libdivecomputer are
used.
The function is only called when the current dive changes
and the location is stored in the item delegate.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When presenting the list of dive sites on the dive-info tab, sort
the dive sites by distance to the current dive. The idea is that
when the user wants to select a dive site, close dive sites should
be prioritized.
The location of the dive is determined with the dive_get_gps_location()
function introduced in the previous commit. This actual GPS data get
precedence over the currently set dive site for that dive.
On change of dive, the current location is updated in the
DiveLocationFilterProxyModel so that a potentially expensive search
for GPS data is not repeated for every comparison.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some dive computers save GPS data. Currently, this is stored
by libdivecomputer in an "extra field". When generating a
new dive site for a dive try to use this data to place the
dive site.
To do so, create a "dive_get_gps_location()" function. This
function can be extended later to use e.g. event. When creating
a dive site, use the result of this function over a potential
pre-existing dive site.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, dive site names are only updated on full reload.
Instead hook directly into the corresponding signal in the
MapLocationModel to set the name. Also to the coordinates
directly there instead of going via the MapWidgetHelper.
In the MapWidgetHelper, just center on the changed dive site.
Hook into the signal directly there and remove the slot
from the MapWidget. This makes the whole call-chain at least
one call shorter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of looping over the dive table and extract dive sites,
loop over the dive site table.
This makes it possible to show dive sites that have no dive
associated with them.
But we have to create to functions that check whether a dive
site has any shown dives or has any selected dives.
Moreover, change the code to add near dive sites of the same
name if in edit mode. Other wise (erroneously added?) dive
sites with the same name cannot be moved on the map.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There used to be a flag to avoid reloading of the map. Since this
is not used anymore, remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive-site-edit and dive-site-table tabs both put the filter
into a special dive-site mode. When switching between both, it
could happen that the one got its show befor the other got
its hide event.
Thus, the first would start dive-site filtering and the second
stop it. Now the app was not in filter mode even though it should.
To solve this problem, add reference counting for the filter's
dive-site mode. In both tabs call the enter/exit functions
on show/hide. In the dive-site-table tab, when the selection
changes, use a set function that doesn't modify the reference count.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the dive-site-filter is active either on the dive-site-edit
page or the dive-site-list page, use that as the flag for dive-site-edit
mode. Moreover, when the filter is reset, the
MapWidgetHelper::reloadMapLocations() function is called, so we
can use that place to enter/exit edit mode.
This makes it easier to keep everything consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveListView::selectDives() would only select new dives but not clear
the old selection. Thus, callers would have to clear the selection
first. That would lead to two selection-changed signals.
Move the unselectDives() call into DiveListView::selectDives().
The DiveListView has an internal flag to prevent double signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was only used locally and only a stub for calling
MapWidgetHelper::centerOnSelectedDiveSite. Call the latter directly
instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changing the dive selection, we have to reload the map to show
the correctly highlighted flags. Do this directly by hooking into
the DiveListNotifier::divesChanged signal instead of indirectly
via the MainTab.
Moreover, on reload center on the highlighted dive sites.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This member variable was only used locally in functions.
Accordingly, make it a function-local variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
During edit mode, we could get spurious reload() requests owing
to tabs being hidden. This led to undefined behavior:
In some cases entering dive site edit mode would show all dive
sites, in some only the dive site of the currently edited dive.
Therefore, refuse to reload the map while in edit mode. The
corresponding flag already exists.
Partially fixes#2076
Reported-by: Doug Junkins <junkins@foghead.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On reload of the map, the map exits edit mode. Sounds logical
at first, but the whole map-mode code is very unpredictable.
What happened was that when switching from the dive site table
to dive site edit mode, the code would enter map edit mode first.
Then, the dive site tab got its hide-signal, which would reset the
filter. This would reload the map and thus exit mode. Hence the user
can't drag the flag on the map.
Partially fixes#2076
Reported-by: Doug Junkins <junkins@foghead.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Creates the dialog box to select which sites to import from the file
selected in mainwindow.cpp. The DivesiteImportModel is created as a
table to display and select which sites are to be imported. Once the
sites are selected, the Command::importDiveSites command is called to
add the sites to the core dive site table with undo/redo functions.
Signed-off-by: Doug Junkins <junkins@foghead.com>
Adds "Import->Import dive sites" menu to mainwindow.cpp and adds the
on_actionImportDiveSites_triggered() method to prompt for the filename
to import from. The files are parsed and then any dive and trip data is
cleared before opening a dialog box to select which sites are to be
imported.
Signed-off-by: Doug Junkins <junkins@foghead.com>
ImportDiveSites adds the provided dive sites to the core dive site table
and stores the source data so it can be undone.
Signed-off-by: Doug Junkins <junkins@foghead.com>
An interesting crash:
1) On the dive site tab select a dive site such that only one
trip is shown.
2) Unselect all dives.
3) Press CTRL-A while the dive list has focus.
4) This will select a trip.
5) In MainTab::updateDiveInfo() this will switch to the previous
tab active when in trip mode.
6) This will reset the filter.
7) This will reset the currentTrip field which we just set.
8) Since we just set the currentTrip field, we don't expect
it to change and reference a null pointer.
To fix, don't switch tabs when on the dive site tab. This also
improves user experience as there seems to be no reason to switch
away from the dive site tab.
Currently the index of the dive site tab is hard-coded - this
should be changed!
Fixes#2077
Reported-by: Doug Junkins <junkins@foghead.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A number of objects in this file were global. Yet they weren't
used anywhere else. Don't export these symbols by making them of
static linkage.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A copy of a C-string was assigned to a QString. The copy was never
freed. Instead, assign the C-string directly. This does the right
thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- Use a beginResetModel()/endResetModel() pair instead of distinct
addRows / removeRows pairs.
- Reuse the update function in the constructor().
- Let "rows" be the number of rows, not the number of rows minus one.
- Remove updateInfo() function as it does the same as update().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
YearInfo is a trivial wrapper around "stats_t *". All the
constructor / destructor rigmarole seems completely unnecessary.
Remove it. Probably the whole class could be removed, but for
that I'd need more insight into Grantlee, which is low on my
list of priorities for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For printing, DiveObjectHelpers are allocated and pointers to these
are stored in a QVariantList. The objects are never freed. To fix
this leak, keep the objects in a std::list<>.
std::list<> was chosen because
1) Pointers to elements stay valid during its lifetime.
2) Objects can be constructed directly in the list with emplace_back()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We're quite inconsistent when it comes to variable naming.
The general usage is camelCase for Qt parts and snake_case
for core code. Virtually nowhere do we start variable names
with a capital letter. Therefore, turn this one weird case
into camelCase.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
TemplateLayout::m_engine is a Grantlee::Engine that is reallocated
for every function call. Instead of the archaic memory-management,
remove the member variable and make it a local variable of the
two functions that need it. There seems to be no point in keeping
the object alive beyond the function's scope.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The default QString constructor generates an empty string. No point
in assigning the empty string to such a thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the dive information tab was not updated when the user
edited fields. The fields were only updated when switching between
dives.
Therefore, hook into the "divesChanged" signal and update the fields
accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The information tab used displayed_dive to fill out its field.
For consistency with the main tab and in a bigger effort to remove
displayed_dive, use current_dive instead.
Only clear the fields if no current_dive is set. The code used to
clear the fields and overwrite them later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the main-tab, when looking at a trip, the fields were filled
out with dive-data and then either hidden or overwritten with
trip data. Move the update of the fields into the corresponding
if-branch that is only active if on dive-mode.
This means removing the UPDATE_* macros, which updated or cleared
dive-fields depending on whether a current dive was set. These
operations are now performed explicitly in the corresponding
if-branches.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit adds an entry to the dive media context
menu which offers to write a subtitle file. This
creates an .ass file for the selected videos.
In an attempt to to clutter the screen too much, don't
show irrelevant entries (zero temperature or
NDL and show TTS only for dives with stops).
VLC is able to show these subtitles directly, they
can be integrated into the video file with ffmpeg.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In the dive site selection widget there are two special entries
(add dive site with given name). Don't show this if the user didn't
enter a string.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive site selection widget implements a lessThan() function, but
that was never called. Apparently in a QListView one has to start
sorting by hand? Do just that.
In any case, the lessThan function was erroneous as it would happily
sort away the first two special entries. Fix it with a special case
for these to.
Finally use case insensitive string comparison.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To reset the filter-model, LocationInformationWidget would extract
the model from the diveSiteListView and then downcasts it. Instead,
it can access it directly, because the filter-model is a subobject
of LocationInformationWidget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveLocationLineEdit stored a pointer to itself in a global variable
so that the DiveLocationModel can access it to access the filter text.
Instead, on change simply pass the filter text down from DiveLocationLineEdit
to DiveLocationModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive-site line edit box features two special entries for adding
new dive sites. These should display different texts depending on
whether the current dive has a dive site or not.
The current check is wrong, because it used displayed_dive, but
since the last set of undo-changes, this might not be filled out
correctly anymore. Instead the code should check the actual current
dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This struct is used to store the completers during construction
of the object. But it is never accessed afterwards. Therefore,
remove it from the object and remove the structure definition
from the header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Most tabs in the dive-information widget have there own translation
units and ui-files. Only the equipment tab was married with the
main tab. Move it out to get more reasonably sized translation units
and some isolation.
Currently, this needs ugly hacks when entering / checking for edit
mode: Access to MainTab is via the MainWindow. And vice/versa, when
accessing the DiveEquipmentTab from the MainTab, the former is
hardcoded as the first item of an array.
These hacks will soon be removed though, when making equipment
editing undoable. The tabs will then be independent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only caller of said function used to check whether MainTab is
in edit mode. For this case there is already a function - use that
instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding dives in an undo command, the index is saved in the
command. This seemed logical at first, because why calculate the
index more than once? But actually it made the code rather subtle
and brittle when multiple dives were added.
Moreover, this is a pointless optimization, as it doesn't optimize
the common case (only one execution).
Remove this for now and calculate the index on every execution. If
it ever turns out to be a bottle neck, it will be much more effective
to turn the linear search of the index into a binary search. A
further sensible optimization would be inserting in batches.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The tag-widget was only showing the completer if we were in edit mode.
The edit mode does not exist anymore - therefore remove the check.
Hopefully this has no unintended consequences, like the completer
not disappearing when it should.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Selecting "Selected dives" exports the dive sites for the selected
dives. Selecting "All dives" exports all dive sites.
XML format is the subsection of the divelog XML that describes the
sites headed with a <divesites> section like:
<divesites program='subsurface' version='3'>
</divesites>
Signed-off-by: Doug Junkins <junkins@foghead.com>
Apparently, in some Qt-versions the destructor of the base class
calls hide on child-objects (according to Qt's object hierarchy).
This is obviously called after the derived class has been destructed.
In a concrete case, the base class of the destructed MainWindow
would hide the TabDiveSite object. That would reset the filtering
if a dive site was selected, which would indirectly access the
MainWindow, which is already partially destroyed.
Therefore, destroy the MainTab before destroying the MainWindow.
Do this by keeping it as a std::unique_ptr subobject. Thus, it
will be destroyed before the MainWindow and remove itself from
Qt's object hierarchy.
Reported-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This feels more natural than selecting a single cell. Still,
the "delete" cell is not visibly selected, which give a
strange impression.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The model was not reset on file close, leading to weird effects.
New dive sites would be added at the end of a table full of empty
entries.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive tabs are disabled, when no dive is shown. The dive site tab
is implemented as a dive tab, which is of course conceptually wrong.
Moreover it has the nasty side effect that when adding an empty dive
site, no dives are shown and the tab is disabled, leading to a
UI dead lock.
Therefore, disable all tabs but the dive site tab. The proper fix
will be a refactoring of the UI.
Reported-by: Doug Junkins <junkins@foghead.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When in dive site tab and some dive sites are selected, show only
dives at those sites. Simply read the selection and pass it to the
filter.
Start and stop filtering when switching to and from the tab,
respectively.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the edit-dive-site tab the filter is switched to a particular
mode where only dives at that site are shown.
If we want to reuse this for the dive-site tab the mode has to
be extended to allow for multiple dive sites. This is trivially
done by replacing a pointer by a vector of pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of sending a signal when counts change, catching them
in the filter widget and update the window title there,
directly update the window title in the model. This removes a
signal/slot pair.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Editing the dive site of a dive may make a dive site appear
(first dive of that site) or disappear (the last dive of that
site was removed). Therefore, we have to reload the dive site
markers on editing the site of a dive.
This should be made smarter by only reloading the markers if
the dive site status actually changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The editing of a dive field is only performed when focus
is removed from the field. On pressing CTRL-s, the changes
in the currently active field were therefore not saved.
Remove the focus from all fields to trigger an edit command
yand thus ensure that all changes are saved.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Properly implement the unsaved-changes flag(s). Since we currently have
two kinds of changes, there are two flags:
1) dive_list_changed in divelist.c marks non-undoable changes. This flag
is only cleared on save or load.
2) QUndoStack::isClean() is used to determine the state of undoable
changes. Every time the user returns to the state where they saved,
this flag is cleared.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The whole edit logic moved from displayed_dive to current_dive
and it became more and more tedious to keep these in sync.
Therefore, simply always display current_dive. The only exceptions
are the equipment tab and the planner, as these are not yet
integrated in the undo system. Once this is done, displayed_dive
can be removed.
Moreover, remove the clear parameter from updateDiveInfo().
Instead simply clear of there is no current_dive set.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If a dive site was edited, the location field should be updated.
Do this by hooking into the diveSiteChanged signal of DiveListNotifier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of letting the user edit the fields before adding a dive,
simply add an empty dive. Thus, the ADD mode of the main tab can
be removed.
Constructing a new dive with default-depth and making sure that
the dive is displayed correctly is very subtle. This all needs
to be detangled in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Merging dive sites is currently only possible if dive sites are at
the exact same position.
Introduce a field where the user can enter a distance up to which all
dive sites should be listed. These can then be merged.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter code is strange: it actually only checks the
dive->hidden_by_filter flag. Thus, before propagating the dive
changed signal, this flag has to be updated. Do this in the
DiveTripModel. Ultimately, this should be refactored.
Moreover, if the filter-flag changed notify the frontend
of a changed trip so that the trip is hidden / unhidden.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If fields in a trip are edited, select that trip, which will display
the trip in the notes-box.
This is realized by hooking into the tripChanged signal in the dive-list.
A layering-violation, perhaps?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code in maintab is not called anymore (unless cylinders
or weightsystems are changed). Move the code to the command
that edits water temperature.
This should be audited as it is unclear weather this is
necessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since all fields on the maintab are now directly edited,
there is no point in marking fields as changed. Remove
unused functions MainTab::markChangedWidget() and
MainTab::resetPalette().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is copying the dive editing code. It uses an OO design with
virtual functions for getting and setting the values. It doesn't
use templates though, as both fields of strig type. This feels
a bit over-engineered, but it is 1) consistent with the dive edit
code and 2) the number / types of dive trip fields might increase.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When pasting (or undoing paste) the cylinders or weights may change.
Send the appropriate signals and update the models accordingly.
Currently, this means copying from current dive to displayed dive,
but hopefully we can get rid of "displayed_dive" in the not so
distant future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove a few cases of
void fun() {
...
}
While touching these functions, fix a few other whitespace
coding style violations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions are now performed by the edit commands and the
macros have no users. Remove them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Moving the tagged-string edit functions into the undo-system made
the MainTab::saveTaggedStrings() and MainTab::diffTaggedStrings()
functions unnecessary. Remove them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Save selected dives when generating an edit-command. Restore the
selection and current dive in undo()/redo().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Undo of editing should probably also restore the old selection and
current dive. Therefore, move the functions that set and restore the
selection and the current dive from the command_divelist.cpp into the
command_private.cpp translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The edit-commands were called with a list of selected dives and
the original value. Move the creation of the list and extraction
of the original value into the edit-commmands.
This removes the "current is last" rule and allows for more
flexibility.
Since the depth- and duration editing applies only to the current
dive and not all selected dives, add a parameter to the edit-commands
controlling whether only the current or all selected dives are edited.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive list was not updated automatically when an edit command was
executed. There was already a signal to do that, viz. divesChanged().
But that signal worked by-trip and didn't have a dive-field specifier.
The edit-commands used the divesEdited() signal that isn't by-trip
but has a dive-field specifier.
Unify these two signals to be by-trip and with dive-field specifier.
This needs common code to generate the by-trip list that is moved to
a command_private.h header.
Since there might now be multiple signals (one per trip) actually
check in the main-tab whether the current trip is affected to
avoid multiple update of fields. This has the positive(?) effect
of not doing any update if the current dive isn't changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The acceptingEdit field was used to ignore edit-signals in
MainTab::acceptEdit(). But an equivalent mechanism already
exists: setting editMode to IGNORE. For consistency, replace
the former by the latter. acceptEdit() resets the editMode
in all cases anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was a bit different from the other editing commands:
1) Only the current dive is edited not all selected dives.
Therefore, create a function that turns the current dive
into a one-element list.
2) The profile has to be replot. Here, likewise, create a
function to do that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code follows the other edit-commands, but uses its own base
class, because it is distinctly different. Editing the tag field
does not simply mean setting the tag for all dives, but rather
adding and removing individual tags.
This class will be reused for editing of dive buddies and masters.
Modify the tag widget thus that it sends an editingFinished()
signal when it goes out of focus. The editingFinished() signal
was prevented by hooking into the return, enter and tab key-events.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Now that we have dive-changed signal, send it on merging
dive sites so that the notes tab can be updated accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit more tricky. There are two modes: set dive site
and set newly created dive site. This is realized using an OO model
with derived classed. Quite convoluted - but it seems to work.
Moreover, editing a dive site is not simply setting a value,
but the list of dives in a dive site has to be kept up to date.
Finally, we have to inform the dive site list of the changed
number of dives. Therefore add a new signal diveSiteDivesChanged.
To send only one signal per dive site, hook into the undo() and
redo() functions and call the functions of the base class there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is different from the other editing commands, because
date and time editing may change the order of the dive list.
Therefore, this uses an already implemented dive list command.
The command is extended to send a divesEdited() signal.
This signal and the divesChanged() signal, which is used by
the dive list, will be unified in a later commit.
Update of the graphics is now not done via signals, a direct
call is performed in MainTab::divesEdited(). This simplifies
things.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Mostly trivial. Since now on editing the field is re-set, the
validation function becomes unnecessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was rather trivial and modeled after the previous edit
UndoCommands. Since this is the first time we're editing
integers a new constructor instantiation had to be added.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one was trivially modelled after notes editing. Only difference:
the textChanged() signal was replaced by the editingFinished()
signal so that we're not generating undo-commands on every key-press.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a new UndoCommand for dive mode editing. This one is a bit
special, as the mode is associated with a dive computer (DC),
not a dive. Thus the edit command has an additional parameter,
viz. the index of the DC.
This does not fit properly to the EditBase class, as this class
isn't aware of additional parameters and therefore this parameter
is not sent via signals. At the moment this doesn't matter. In
any case, the semantics of editing are weird and therefore let's
do the simple thing (derive from EditBase) and let's see what
the future brings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To keep the UI in a consistent state, update the notes field if
it is changed by an undo command. To that purpose, add a new
signal to diveListNotifier with a list of dives and a field-id
as payload.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement a first rudimentary dive-editing command. The main code
resides in a base class Command::Edit, which calls virtual functions
to read / set the fields and extract the field name.
Implement an example: editing of dive notes.
This dose not yet update the UI on undo / redo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a "purge unused dive sites" button to the dive site list.
Connect it to a new PurgeUnusedDiveSites command. Implementation
was trivial: simply copy the DeleteDiveSites command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Stretch the name and description columns in the dive site table,
so that they don't start too small. This should only be a temporary
solution, as it disables the save column width to preferences
feature of TableView.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The edit dive site button was connected to a *signal* of MainWindow,
which was connected to a slot of MainWindow. Remove the unnecessary
intermediate signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add an edit column that calls the new editDiveSite() function
of MainWindow. The calling code is in DiveSiteSortedModel.
Quite illogical, but that's how TableView works, for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As long as a text field is active, CTRL-Z only affects this field.
Thus it is suprisingly hard to undo edits. There seems to be a
fundamental problem with CTRL-Z handling.
To make it somewhat easier, catch any ESC-key event and move the
focus to the MainWindow. This effectively removes the focus from
any text field.
This all appears very wrong, but so far I wasn't able to find the
root cause of the problem.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The signal was caught by the MainWindow to:
1) call setDefaultState()
2) call refreshDisplay()
3) call refreshDisplayedDiveSite()
1) Let's call that directly from the widget. The reason is that in
the future there might be multiple way to get into the widget and
therefore the widget needs finer control.
2) Remove this call as it produces an unsteady UI.
3) This should be done by undo commands, not only when finishing
dive site editing.
Thus, the signal becomes unnecessary and can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one was rather trivial, as there is no actual merging
done. Quite simply, a number of dive sites are removed and
their dive added to a different dive site.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply copy code of the other edit dive site functions. Here though
introduce a destructor in the undo command to free the taxonomy data.
Remove the taxonomy member of the LocationInformationWidget class,
because it is not needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since no dive site field editing enters edit mode anymore,
the whole edit mode state and code can be removed from the
widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply hook into the appropriate signal. Thus, the "update dive site
location" button can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply copy the code of note editing. It's a bit more complex,
since we have to parse the Gps coordinates. For consitency,
rename the COORD field to LOCATION (the field in the dive_site
struct is called LOCATION).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply copy the code of notes editing, but use the taxonomy_* functions
to read and set the value. Moreover, replace the three TAXONOMY_n field
ids by a single TAXONOMY id. We will probably never show one column per
taxonomy field, but rather a single column with a string derived from all
taxonomy fields.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the notes field uses a QTextEdit, which doesn't
send a signal if it goes out of focus. But for undo of
dive-editing we don't want to create an undo object for
*every* text change.
Thus, create a custom TextEdit widget that derives from
QTextEdit and turns the focusOutEvent into a editingFinished
signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the dive site widget, use the undo commands instead of editing
only on accept. This introduces an inconsistency betwee the
name and description and the other fields. This will be fixed
in follow-up commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the name of a dive site is edited, it might wander somewhere
else in the table and thus out of view. Hook into the "dive site
changed" signal and scroll there.
The code is rather subtle as it depends on signals being called
in a certain order: First the item is moved in the model, only
then can we scroll to the correct place.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding a dive site, enter the name field of the new dive site.
Thus, when adding a new dive site, the user can immediately edit the
name.
The code is rather subtle: It hooks into the dive site added signal
before executing the command and unhooks afterwards. This only works,
because signals are executed in order of connect - thus the model
adds the index first and only *then* is the field edited.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement a dive site addition undo command and connect it to
the add dive site button. The added dive site has a default
name ("new dive site").
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply duplicate the code of dive site name editing. Split out
the common functionality that swaps a C and a Qt string.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a way of deleting dive sites by clearing all fields.
This is not necessary anymore, as now the user can delete a
dive site in the dive site list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This feature will be replaced by.
1) An explicit purge empty dive sites feature.
2) Not allocating dummy dive sites for GPS coordinates.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement an undo command that edits the name of a dive site.
Connect it to the dive site table, so that names can be edited
directly in the table.
Send signals on undo / redo so that the dive site table and
the dive site edit widget can be updated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Create a new undo-command for deleting dive sites. If there are dives
associated with that site, the dives will be removed. The frontend
is not yet updated in such a case, as that infrastructure is in a
different PR.
Connect the trashcan icon of the dive site table to the undo command.
Currently, this code is in the dive site model, which makes little
sense, but is how the TableView class works. We might want to change
that when cylinder and weight editing are made undoable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The LocationInformationModel used to sort its entries and was completely
rebuilt after every change. This makes it rather complex to support
incremental changes.
Instead, keep LocationInformationModel sorted by UUID so that indexes
are consistent with indices in the core dive site table.
Implement sorting by other columns than name and enable sorting in the
dive site view.
Finally, don't cache the list of dive site names for the mobile app,
since that would also need some rather convoluted methods of keeping
the list up to date. Calculate it on the fly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce two DiveListNotifier signals which are sent by
the undo commands if dives are added to / removed from the
core.
The signal has the dive site and the index in the global
dive site table as payload. Thus, the model has only to
remove the appropriate rows.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency with remove_dive(). Moreover, swap parameter order
in remove_dive() so that both functions use the same parameter order.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a new signal to DiveListNotifier. Send signal if dives are
added or removed and therefore the dive count of a dive site
changes. The dive sites are collected and the signal is sent
at the end of the command.
Add code to update the table view.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a very simple tab-widget presenting the list of known dive sites.
The table is rendered using our custom "TableView".
The (mis)uses the "LocationInformationModel". It moves the items
to be displayed (delete, name, description, number of dives) to the
front and makes the others hidden.
Moreover, it was necessary to limit the geo-tag decoration role to
the name to avoid having the icon next to each column.
Make the trash-can icon active and the name and description editable.
This is modelled after the cylinders-table code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) The second parameter (selected_only) was always false. Therefore,
remove it.
2) Simplify the function by simply returning the reference count.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of setting dive->dive_site directly, call the
add_dive_to_dive_site() and unregister_dive_from_dive_site()
functions. In the parser this turned out to be a bit tricky.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a dive site table to each dive site to keep track of dives
that have been added to a dive site. Add two functions to add
dives to / remove dives from dive sites.
Since dive sites now contain a dive table, the order of includes
had to be changed: "divesite.h" now includes "dive.h" and not
vice-versa. This caused some include churn.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declaration of these functions to "file.h" and "parse.h"
according to the translation unit they are defined in. Thus, not
all users of "dive.h" have to suck in "sqlite3.h".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the UUID will be overwritten on save and is only used on save
and load, set it only on save or load. For other created dive sites,
leave the UUID field uninitialized.
This means that the UUID will change between saves. Let's see how
the git saver handles that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When a new dive site is created in MainTab::updateDiveSite()
and there is no text, it gets a generic name. But: the function
exits early if there is no text, so this is dead code. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As opposed to dive trips, dive sites were always directly added
to the global table, even on import. Instead, parse the divesites
into a distinct table and merge them on import.
Currently, this does not do any merging of dive sites, i.e. dive
sites are considered as either equal or different. Nevertheless,
merging of data should be rather easy to implement and simply
follow the code of the dive merging.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To extend the undo system to dive sites, the importers and downloaders
must not parse directly into the global dive site table. Instead,
pass a dive_site_table argument to parse into.
For now, always pass the global dive_site_table so that this commit
should not cause any functional change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To enable undo of dive site functions, it is crucial to work
with different dive site tables. Therefore add a dive site table
parameter to dive site functions. For now, always pass the global
dive site table. Thus, this commit shouldn't alter any functionality.
After this change, a simple search for dive_site_table reveals all
places where the global dive site table is accessed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
-return the result instead of storing in a parameter, we now know that the list
contains only those results that are generated in the function
-allocate the result with the correct length right from the start
-do not iterate over keys of a map and then do a map lookup to get the value but
use an iterator that gives us both right from the start
-remove one call alltogether as the results were not used there
Signed-off-by: Rolf Eike Beer <eike@sf-mail.de>
See https://www.kdab.com/goodbye-q_foreach/
This is reduced to the places where the container is const or can be made const
without the need to always introduce an extra variable. Sadly qAsConst (Qt 5.7)
and std::as_const (C++17) are not available in all supported setups.
Also do some minor cleanups along the way.
Signed-off-by: Rolf Eike Beer <eike@sf-mail.de>
This is only in Qt 5.7 and therefore can't be used in Qt 5.5 and 5.6
builds. Moreover, we can't simply reuse Qt's version owing to
licensing concerns.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Allow splitting out a dive computer into a distinct dive. This
is realized by generating a base class from SplitDive.
This turned out to be more cumbersome than expected: we don't
know a-priori which of the split dives will come first. Since
the undo-command saves the indices where the dives will be insert,
these have to be calculated. This is an premature optimization,
which makes more pain than necessary. Let's remove it and
simply determine the insertion index when executing the command.
Original code by Linus Torvalds <torvalds@linux-foundation.org>.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This introduces a csv file that contains the data from
the structs defined in profile.c, in particular all
deco information computed for the dive profle (including
NDL, TTS, ceilings, surface GFs etc).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
It expands to nullptr anyway and is inconsitent with the rest of the
code. Let's remove this anachronism.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
printGPSCoords() returned a newly allocated C-style string. Most
callers simply made a QString out of it and freed the C-style string.
This is paradoxical, as printGPSCoords internally works with QStrings
and converts them to C-style on return.
Therefore, let printGPSCoords() return a QString and create a
printGPSCoordsC() wrapper for the two C-callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The printGPSCoords() function returns a copied C-style string. Since
the owndership is transferred to the caller, the correct return type
is "char *" instead of "const char *".
Thus a number of casts when calling free can be removed.
Moreover a number of callers didn't free the string and thus were
leaking memory. Fix them. Ultimately we might want two versions
of the function: one for QString, one for C-style strings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Printing never worked, none of this was ever included in test builds. Also, now
that there are official releases of QtWebKit again, this just doesn't seem worth
carrying along anymore.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All these aren't actually things that need fixing, they are observations about
the code.
Given that LGTM.com reports FIXME comments as Alerts, let's change the ones
that aren't about things that need fixing to something more harmless.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
ostcFirmwareCheck in DownloadFromDCWidget was neither freed
in the destructor, not freed if a new object was allocated.
Simply make it a unique_ptr<> to do all the work for us.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We already do that on mobile and I was certain we used to do this for
desktop as well, but apparently that got lost somewhere...
This should solve the problems we are seeing for people with mixed case
email addresses.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All the field in the Notes Panel of the main window are now supported.
This needs some testing especially for the Notes field that may contain
markup. It appears ok to me for single term searches. One would like
to think about the default search option for the Notes.
There is a vertical spacer in the Filter panel that I moved downwards
and whose function I am not quite sure of.
[Dirk Hohndel: small adjustments]
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
6bf4120dbb replaced the trip flag by
a notrip boolean. This was supposed to signal that the user removed
the dive from a trip and therefore it shouldn't be autogrouped again.
Sadly, the commit removed the feature. Reinstate it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
That's redundant with the information that we show in the window title (and
only risks going out of sync, as it is right now).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the filter numbers are now shown in the window titlebar, we can use this
space for an explanation of the two button (they already have tooltips, but
this is even easier for the user).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of using the filter widget itself to show the information how many
dives are displayed, put it in the window title where it's visible even if the
filter widget isn't shown.
If the filter is not active, simply show the total number of dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only clear the filter when the user explicitly resets it. This way the user can
toggle between the map and the filter widget without losing the filter state.
Fixes#1952
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is not perfect - if you open the filter, set some criterion and then
remove it again (without resetting the filter), this variable will give you a
false positive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add an additional mode to the tags, people and location filters: any_of.
Replace the original invert-bool by an enum.
Move the common code into a distinct function.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo-work reversed the direction of the offset. This was apparently
only fixed when using the menu entry, but not when editing dives directly.
Invert the offset to get the correct time.
While doing so, remove a redundant if: First it checked whether the
dates are the same, then whether the offset is non-zero.
Fixes#1975.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
By default we'll only show devices that we believe to be dive computers,
but the user can override that with the recently introduced check box.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Which right now is of course what we do by default, the goal is to only show
what we think are dive computers, but allow to see all of them if the user
wants to.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The thumbnails were fetched in the background to achieve a
snappier UI. The problem with that is that on LaTeX etc.
export only placeholder thumbnails were shown.
Therefore, implement a synchronous mode. This only tries
to fetch cached thumbnails or calculate thumbnails for
images. Videos and remote files are not supported.
Fixes#1963
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
With Facebook support gone, we should offer a way to export
the profile image. This has been part of the TeX support
but this makes it explicit.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The info box can get longish. Offer the user to turn
off display of deco information (surface GF and
individual ceilings).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The .cpp and .h files are all lower-case, the .ui file is camel-case.
Unify to lower-case (which is much more common in the code base).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The texts may not be perfect, but this is a start. Replace the buttons
by combo-boxes. This will allow potential extension to "any of".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use button text to indicate what the current state is (done in code) and use
tool tip to tell the user that pressing the button negates the filter's effect.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In MainTab::acceptChanges there was a "editMode != ADD" condition
inside a else block to "editMode == ADD", which is therefore
redundant. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add negate buttons to the Tags, People, Location and Equipment
filters. Currently, if nothing is entered the filter is ignored
whether negate is on or off. One might think about filtering all
dives without tags, etc. instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement the close & reset functionality, by reseting the
application state to "Default". This is currently the only
state from where the fiter can be called.
To make it consistent with CTRL^F, clear the filter in the
hide() slot, which is called in both cases.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move initialization to a separate function and connect that to the
reset button.
Two points of note:
1) Reseting the text-fields causes signals. Thus, signals have to
be ignored during reset. Do this with a new flag.
2) To make reset of the from-date work, the from-date has to be
initialized to a distinct value. Setting a default-constructed
QDateTime leaves the widget unchanged.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Update the filter counts if dives were added removed by the
undo commands. The undo commands call into the filter model
at the right time so that hidden_by_filter is already set.
The filter model keeps track of the counts and emits a signal,
which is caught by the widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was missing in the export. We export separate hour and
minutes so the template can decide about the time format.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This makes it more like the plain TeX export, the main change
is in the structure of the template file (not included here).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
So far, the TeX export was intended to be used with plain TeX.
To make it compatible with LaTeX, we only need to make sure
there are no macro name clashes and remove plain TeX specific
calls.
So far, this works only for single dives as the export only
sets up macros to contain dive data and then read the actual
latex file (starting with \documentclass etc). Later, the
template should setup macros to be called from the export
file.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When connecting to facebook, I get a warning that the connection
is not secure. It's a wild guess that this patch solves the
issue but I currenty cannot build with facebook support. So I cannot
check.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The temperature range 0-100 was inadequate in both supported
scales (Celsius and Fahrenheit). Extend the range to encompass
all physically meaningful values in both scales.
Use the default-values to set the minimum and maximum of the
UI-fields. Thus, these values are configurable in a single place.
In the future we should use a scale-independent representation
(e.g. mkelvin as in the rest of the code base). But this would
mean implementing a custom widget with a conversion function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) Choose the correct conversion function for comparison.
2) Add a unit suffix to the fields.
3) Update the suffixes on change of preferences.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On all (most?) places we use separate date/time fields for the time of a
dive, and we follow the setting from the preferences to format those.
Make the new filter widget consistent, with respect to the to and from
interval.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The alignment of the 2 first lines of the new filter widget looked badly
aligned. Fixed by this simple change.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In 891fcbf520 boolean parameters were
replaced by flags. Fix an error in this commit: IMPORT_IS_DOWNLOADED
should be IMPORT_PREFER_IMPORTED.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The "Rating label" had a superfluous space at the beginning.
Remove.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 8e81d3f100 changed a bunch
of Ui classes to be subobject of the widget. For consistency do
the same with the filter widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In commit b0556abdd35f96b816ba11e40bf5707abe0c3ebf, the filter-widget
and the filter were connected by a direct function call. This led
to a rather obscure crash on application-close with Qt 5.12. The
crash is due to the Ui::MainWindow class being a sub-object of MainWindow,
but the FilterWidget2 being *not* a subobject.
What happens is that after calling the MainWindow destructor, the
subobjects are destructed, notably the Ui class. Then the base-class
destructor is called (which makes sense, as destructors are called
in reverse order of constructors).
But: the QObject destructor calls hide() on all still existing child-objects
according to Qt's object hierarchy, notably the visible FilterWidget2.
Now the FilterWidget2, on hiding, updates the MainWindow, which has already
destructed all its subobjects. Crash.
Prevent this crash by making FilterWidget2 a subobject of MainWindow
and thus have it destructed before running the QObject destructor.
Alternative ways would be:
1) Use signal/slot() instead of function calls, as these are automatically
removed if an object is destroyed.
2) Make the FilterWidget2 subobject a smart-pointer. Thus, we probably
wouldn't have to include the corresponding header.
3) Make the FilterWidget2 subobject a plain pointer and delete it
explicitly in the constructor.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In FilterWidget2::updateFilter() a new FilterData object is generated
and then copied onto the filterData member variable. Instead, modify
filterData directly. This seems also more logical from a semantic
point of view: Do we want to reset fields that were not set by the
user?
Contains trivial whitespace fix.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the latest version of the new filter-widget the connection
between widget and filter was lost. Connect both - but use a
simple function call instead of a signal, since it is not
immediately obivous where the connection should be made.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_imported_dives() takes four boolean parameters. Replace these
by flags. This makes the function calls much more descriptive. Morover,
it becomes easier to add or remove flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since process_imported_dives() can add dives to a newly generated
trip, this need not be done in the downloading code. This makes
data flow distinctly simpler, as no trip table and no add-new-trip
flag has to be passed down to the libdivecomputer glue code.
Moreover, since now the trip creation is done at the import step
rather than the download step, the latest status of the "add to
new trip" checkbox will be considered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If this flag is set, dives that are not assigned to a trip will
be assigned to a new trip. This flag is set if the user checked
"add to new trip" in the download dialog of the desktop version.
Currently this is a no-op as the dives will already have been
added to a new trip by the downloading code. This will be removed
in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The logic in process_imported_dives() was faulty: Dives are merged
trip-wise in a loop. But if only autogenerated trips were supposed
to be merged, the trip would not be added.
Change the logic to always add the trip if it is not merged. To make
the loop easier to read, factor out the merge-trip-into-existing-trips
logic into a separate function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This adds a checkbox for rebreather modes of the planner
that force the ascent to be in OC mode. Before, one had
to add a one minute last segment with the mode change but
this is not practical when manually searching for the
maximal bottom time given gas reserves.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
After the downloading finished, the mainwindow-display is reset
via a signal. This is probably an artifact of old times, when
downloading was done into the main dive-list. Nowadays, this seems
to make little sense, as the main dive-list is not changed by download.
Remove the signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveListBase had an explicit constructor that initialized the
"firstExecution" member variable. The latter was a development-
artifact that was never used. Remove the member and the constructor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On desktop, replace all add_imported_dives() calls by a new undo-command.
This was rather straight forward, as all the preparation work was done
in previous commits.
By using an undo-command, a full UI-reset can be avoided, making the UI
react smoother.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split the process_imported_dives() function in two:
1) process_imported_dives() processes the dives and generates
a list of dives and trips to be added and removed.
2) add_imported_dives() calls process_imported_dives() and
does the actual removal / addition of dives and trips.
The goal is to split preparation and actual work, to
make dive import undo-able.
The code adds extra checks to never merge into the same
dive twice, as this would lead to a double-free() bug.
This should in principle never happen, as dives that
compare equal according to is_same_dive() are merged
in the imported-dives list, but perhaps in some pathologival
corner-cases is_same_dive() turns out to be non-transitive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing log-files we generally want to merge trips. But
when downloading and the user chose "generate new trip", that
new trip should not be merged into existing trips.
Therefore, add a "merge_all_trips" parameter to process_imported_dives().
If false only autogenerated trips [via autogroup] will be merged.
In the future we might want to let the user choose if trips
should be merged when importing log-files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old way of merging log-files was not well defined: Trips
were recognized as the same if and only if the first dives
started at the same instant. Later dives did not matter.
Change this to merge dives if they are overlapping.
Moreover, on parsing and download generate trips in a separate
trip-table.
This will be fundamental for undo of dive-import: Firstly, we
don't want to mix trips of imported and not-yet imported dives.
Secondly, by merging trip-wise, we can autogroup the dives
in the import-data to trips and merge these at once. This will
simplify the code to decide to which trip dives should be
autogrouped.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the future we want to download trips into a distinct trip-table
instead of the global trip-table to allow for undo of import.
Therefore add a trip_table argument to DiveImportedModel::repopulate()
and a trip_table member to DiveImportedModel. To correctly set these,
add a DownloadThread::trips() function, which currently simply returns
the global trip table.
Finally, make "struct trip_table *" a Q_METATYPE, so that the corresponding
arguments can be passed from QML.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To allow parsing into arbitrary trip_tables, add the corresponding
parameter to the parsing functions and the parser state. Currently,
all callers pass the global trip_table so there should be no change
in functionality. These arguments will be replaced in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently trips are added to the global trip table. If we want to
make dive-import undoable, we should be able to parse trips of a
log-file into a distinct table. Therefore, add a trip_table
parameter to
- insert_trip()
- create_and_hookup_trip_from_dive()
- autogroup_dives()
- unregister_trip()
- remove_dive_from_trip()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Trips were added to the core with the first dive of that trip.
With the recent changes that keep trips ordered by first dive,
this became counter-productive. Keeping a consistent state at
all times would mean resorting the trip table for every dive
that is added.
Instead, add all dives to a trip and *then* add the trip to the
core. Change the data-structures to not register trips-to-be-added
with individual dives, but keep them in a separate vector for
each undo command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, all trips are kept in a linked list. Replace the list
by a table in analogy to dive_table. Use this to keep the trip_table
sorted as suggested by dump_trip_list(). When inserting a trip into
the table do that after adding the dives, to avoid warnings coming
out of dump_trip_list().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rename
- dive_get_insertion_index() -> dive_table_get_insertion_index()
- unregister_dive_from_table() -> remove_from_dive_table()
- get_idx_in_table() -> get_idx_in_dive_table()
- sort_table() -> sort_dive_table()
This will make it more straight-forward to generate these functions
from macros.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently autogroup_dives() groups all dives in the global dive
list. Add a table parameter so that dives in any table can be
grouped. Thus it will be possible to pre-group dives on import,
which will be used for undo of import.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After loading or importing, the caller usually called autogroup()
to autogroup dives if so wished by the user. This has already led
to bugs, when autogroup() was forgotten.
Instead, call autogroup() directly in the process_loaded_dives()
and process_imported_dives() functions. Not only does this prevent
forgetting the call - it also means that autogrouping can be
changed without changing every caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveTripModel was used to represent both, trip and list views.
Thus many functions had conditionals checking for the current mode
and both modes had to be represented by the same data structure.
Instead, split the model in two and derive them from a base class,
which implements common functions and defines an interface.
The model can be switched by a call to resetModel(), which invalidates
any pointer obtained by instance(). This is quite surprising
behavior. To handle it, straighten out the control flow:
DiveListView --> MultiFilterSortModel --> DiveTripModelBase
Before, DiveListView accessed DiveTripModelBase directly.
A goal of this commit is to enable usage of the same model by mobile
and desktop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In commit 6bf4120dbb the trip-flags
were replaced by a simple boolean. This made the was_autogen
parameter to the remove_dive_from_trip() and unregister_dive_from_trip()
functions unused. Remove these parameters.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Capitalize the first letter of error message sentences in this
file to be consistent with other error messages in this file
and across the project.
[Dirk Hohndel: edit to remove the changes to the .ts files]
Signed-off-by: John Plaxco <john@johnplaxco.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If no dives are selected when trying to export a selection, a message
is shown that no dives were selected, but it's immediately hidden
behind a message saying that a temporary file could not be created.
In fact, the creation of the temporary file wasn't never attempted,
so the message that the user actually sees is misleading.
The solution chosen here is to duplicate the check that at least some
dives are selected, and abort early if that case is detected, rather
than continuing on to show the additional misleading message. Not
elegant, but it gets the job done.
Better solutions to this include refactoring prepare_dives_for_divelogs
to return something more descriptive than a bool, remove that check
from prepare_dives_for_divelogs entirely since it doesn't seem to be
a good fit there, or switch to exceptions for handling these problems
rather than return values. I don't have sufficient familiarity with
the codebase to attempt these more invasive changes, but they
should be considered in the future.
On a final note, some of the other error messages in this file start
with a capital letter, but the one relevant to this particular PR
does not. Again, I'm not familiar enough with the codebase (or
translations) to know if that's safe to change, so I'll leave that
for another time or another developer.
Reported-by: John Plaxco
Signed-off-by: John Plaxco <john@johnplaxco.com>
Unsure where this bug got introduced, but when asking for the dive
time to be shifted 1 hour later, the divelist and the dive details
showed 1 our earlier.
Fixes: #1893
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
To make data flow more clear, unglobalize the downloadTable object.
Make it a subobject of DownloadThread. The difficult part was making
this compatible with QML, because somehow the pointer to the
download-table has to be passed to the DiveImportedModel. Desktop would
simply pass it to the constructor. But with objects generated in QML
this is not possible. Instead, pass the table in the repopulate()
function. This seems to make sense, but for this to work, we have to
declare pointer-to-dive-table as a Q_METATYPE. And this only works
if we use a typedef, because MOC removes the "struct" from "struct
dive_table". This leads to compilation errors, because dive_table is
the symbol-name of the global dive table! Sigh.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function resets the DiveImportedModel. It takes two
arguments: first and last index. All callers passed in 0
and number-of dives anyway, so remove the arguments.
Since this now does the same as repopulate(), merge the
two functions.
Moreover, implement Qt-model semantics by using a
beginResetModel()/endResetModel() pair. This simplifies the
code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The idea is that this struct will have all the needed data
that will be passed to the filter model. Everything that happens
on the filterwidget will fill out this struct, then forward it
to the model, that in turn will activate the filter hiding
some of the dives that matches on your divelist.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Register the new FilterDive widget on the mainwindow
so we can trigger a shortcut to display it.
The shortcut currently doesn't exists.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The idea of this new widget is to be able to filter more
types of data, while keeping it simple and extending the
feature set to something that was impossible with the old
implementation.
While the old implementation had 4 panels that you could
use to filter specific tags / people / types of dives
the new one will let you filter by visibility, temperature
people, name, equipment, etc, in a more natural way
than the old one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
In 302f6adb79 dive-splitting was made
undo-able. To this goal, the dive-splitting functions were split in
two types: Those that operate directly on the divelist and those that
only allocate the dives. The former are not in use anymore, therefore
remove them. Since only the latter remain, remove the "_dont_insert"
appendix of the name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In f427226b3b a combine_trips_create()
function was introduced that combined trips without deleting the old
trips. This was necessary for making combine-trips function undo-able.
The old combine_trips() function is not used anymore. Therefore remove
it. Rename the combine_trips_create() function to combine_trips() as
no differentiation is needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In moveDivesBetweenTrips() a the model is informed of dives
that are moved between trips. A flag tells the model to delete
empty trips. If dives were removed in batches [use case: split
a big trip into multiple smaller trips] the flag would be sent
for every batch. This was handled gracefully by the model code,
but it gave a warning message.
Set the flag only for the last batch, when the trip is *really*
empty.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, when selecting "Load media files even if time does not
match the dive time", the media are added to *all* selected dives.
Instead add it to the closest dive.
This seems like the less surprising behavior. Of course now if the
user really wants to add a media file to multiple dives, they will
have to do it manually.
To avoid a messy interface, this is solved by moving the iterate-
over-selected-dives loop to the core. Thus, a helper-function can
be made local to its translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
dive_create_picture() is called from DiveListView::matchImagesToDives()
with a copy of the picture-filename. But:
- On error the filename is not freed
- On success the filename is strdup()ed
Thus, in all cases the memory is lost. Instead, pass in a temporary
buffer using qPrintable().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
... otherwise this change is not saved when saving to git.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Just as we did for pointer to struct dive_site, make pointers to
struct dive and struct dive_trip "Qt metatypes". This means that
they can be passed through QVariants without taking a detour via
void *.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The whole point of the undo-command system is that the divelist
doesn't have to be refreshed. Therefore, don't do it for autogrouping
/ deautogrouping.
Moreover, the divelist-changed flag is also set by the command and
doesn't have to be set explicitly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
New gcc (v8.2) complains about memcpy()ing an object with non-POD
members. Even though this seems not to be an issue for template_options,
the warning has some merrit. The compiler will recognize when to do
a memcpy() anyway. Moreover, the assignment is easier to read and also
more secure, as a-priory we can't know if Qt's QColor copy-constructor
does some strange things (hopefully not).
Thus, replace memcpy() by simple assignment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The when field gives the time of the first dive. Instead of keeping
this field in sync, replace it by a function that determines the time
of the first dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On shift-times, the list of dives in a trip may become disordered.
Reestablish order with sort_table().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dives of each trip were kept in a list. Replace this by a
struct dive_table. This will make it significantly easier to
keep the dives of a trip in sorted state.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Up to now, dives were added to the global dive table with
add_single_dive(). Split out the funtionality to add a dive to
an arbitrary dive in the add_dive_to_table_function(). The
difference compared to record_dive_to_table is that dives
are added at a specific position or the sort-criterion given
by dive_less_than(). This will allow to use a dive tabe for trips
instead of a linked list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were two versions of the insert_trip() function: one
would merge trips if a trip with the same date already existed,
the other wouldn't. The latter was introduced with the dive-list
undo work.
The problem is that the "date" of a trip (i.e. the first dive)
seems ill-defined as this is a volatile value. Moreover in
the context of making dive-import undoable this is a very
dangerous notion, as the caller needs control over when the dives
are added to a trip.
Therefore, unify these two functions and never merge trips.
The decision on merging dives now has to made by the caller.
This will be implemented in a future commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Traditionally, the DiveTripModel has its data sorted in opposite
direction to the core-data (chronologically descending vs. ascending).
This bring a number of subtle problems. For example, when filling
the model, trips are filled according to the *last* dive, whereas
later insertion points are according to the ->when value from the
core, which depends on the *first* dive.
As a start of fixing these subtleties, change the sort direction
to reflect the core-data. Ideally, this should lead to a removal
of the redundant data-representation.
Since the model is now sorted in ascending order, sorting has to
be enabled in the DiveListView constructor to reflect the
default-descending order.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code always sorted by "ascending" by default. But
because users typically want their new dives top, "ascending"
was defined for NR and DATE, such that it is actually descending.
Turn these around and intitialize these two fields as
default-descending.
This is possible using the Qt::InitialSortOrderRole role
in DiveTripModel::headerData().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the QHeaderView of DiveListView is now the authority
over sort-column and sort-order, it makes little sense
to keep these as member variables. That would only risk
inconsistencies. Remove them and query the QHeaderView
instead.
We still need to keep track of currentLayout, as we
have to detect if it changes to change the underlying
model from tree to list or vice-versa.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView code had a very fundamental problem with its
header: Each had its own idea of who is responsible for sorting.
Since we can't easily change QHeaderView, accept QHeaderView
as the authority on sort-column and order.
To make this possible, split the reload() function in two
distinct functions:
- reload() reloads the model and sorts according to the
current sort criterion.
- setSortOrder() tells the header to display a certain
sort criterion. If this is a new criterion, it will then
emit a signal. In this signal, resort according to that
criterion.
Thus, the actual sorting code has to be moved from the
headerClicked() to a new sortIndicatorChanged() slot.
Morover, the sorting of the QHeaderView has to be used.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 6dc1d239f8 introduced a
well-defined sort order in the case of equal contents. It changed
the code for sorting by date to simply use the order of the
source model.
BUT: The source-model was already sorted in descending order
on date. Thus setting the default order on descening by date,
the data was then presented as *ascending* by date.
Change this back to descending by always using default-ascending
in the filter model.
Ultimately, the source model should simply reflect the ordering
of the core-data (ascending on date), but such a change is
too invasive shortly before release.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveListView::reload() was called for full reset of the dive list
and for changing the view (tree vs. lis) in DiveListView::headerClicked().
Since the latter does sorting by itself, a parameter "forceSort" was
introduced, which defaulted to true, but was set to false by
DiveListView::headerClicked().
To remove complexity, simply let DiveListView::headerClicked() set
the view by itself and remove tha parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The QHeaderView::sectionPressed() signal was connected everytime
the list-view was reset. Likewise, setSectionsClickable() was
set to true everythime the list-view was reset.
Once in the constructor is enough.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The data-flow from C-core to list-view is as follows:
C-core --> DiveTripModel --> MultiSortFilterModel --> DiveListView
The control-flow, on the other hand, differs as DiveListView
accesses both MultiSortFilterModel and DiveTripModel, whereas
MultiSortFilterModel is mostly unaware of its source model.
This is in principle legitimate, as the MultiSortFilterModel might
be used for different sources. In our particular case, this is
not so. MultiSortFilterModel is written for a particular use case.
Therefore, model control-flow follow after data-flow: Let MultiSortFilterModel
set its own source model and DiveListView access the MultiSortFilterModel,
which then manages its source model.
This is not bike-shedding, but will enable a more flexible and
higher-performance sorting.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Import dives from a DC, and have ssrf started in verbose mode. After
downloading dives, hit ok, to add them to the dive list. This crashes
as we cannot get the uuid from the null dive site.
Added a simple guard to fix this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In commit 920eb7576f "dive_site *"
was included in Qt's "metatype" system to be able to pass it
through QVariants. One instance was forgotten and a "void *"
was passed in. On readout NULL was returned, which made it
impossible to add new dive-sites under certain circumstances.
Convert this one instance to a proper "dive_site *" QVariant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was this ugly pattern of passing pointers-to-dive_site via
a QVariant of void * type. This is of course inherently unsafe.
Pass these pointers using their proper types instead. This makes
it necessary to register them in Qt's meta-type system. Doing so,
fixes a bug: QML couldn't call into updateDiveSiteCoordinates()
because it didn't know the type and thus the coordinates of
the moved flag were not reflected in the divesite-dialog.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is another case of a weird pattern where an object would
connect it's own signal to the slot of a different object.
There seems to be no reason why the former couldn't simply
call the latter.
Remove the [start|stop]FilterDiveSite signals of LocationInformationWidget
and call the corresponding functions of MultiFilterSortModel directly.
While doing so, replace the UUID argument by a pointer-to-divesite.
It will be converted anyway right at the beginning of the function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There are two updateDiveSiteCoordinates() member-functions, viz.
in MapWidget and MapWidgetHelper. Adapt them to take a pointer
to dive_site instead of a UUID. This is part of an effort to
replace UUIDs by pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the uuid argument to MapWidgetHelper::enterEditMode() by a
pointer. Likewise, adapt the only caller prepareForGetDiveCoordinates().
This is a small step in a bigger effort to replace dive-site UUIDs
by pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace UUIDs from LocationInformationModel and fix the fallout.
Notably, replace the UUID "column" by a DIVESITE "column".
Getting pointers through Qt's QVariant is horrible, we'll have
to think about a better solution.
RECENTLY_ADDED_DIVESITE now defines to a special pointer to
struct dive_site (defined as ~0).
This fixes an interesting logic bug:
The old code checked the uuid of the LocationInformationModel (currUuid)
for the value "1", which corresponded to RECENTLY_ADDED_DIVESITE.
If equal, currType would be set to NEW_DIVE_SITE. Later, _currType_
was compared against _RECENTLY_ADDED_DIVESITE_. This would only work
because NEW_DIVE_SITE and RECENTLY_ADDED_DIVESITE both were defined
as 1.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The diveSiteSelected signal of DiveLocationLineEdit had the dive-site
UUID as argument. But the receiving slot would not use that argument.
Remove this as a tiny step to remove the UUIDs alltogether.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Access to dive-sites in the LocationInformationModel was via UUID.
Replace this by a direct access to the struct dive_site pointer.
Accordingly, rename the UUID_ROLE to DIVESITE_ROLE.
This is a small step in replacing dive-site UUIDs by pointers
throughout the code base.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing uuids, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes more of the dive-site interface to return pointers
instead of UUIDs. Currently, most call sites directly extract
UUIDs afterwards. Ultimately, the UUIDs will be generally replaced
by pointers, which will then simplify these callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove three cases of rememberSelection() which did not possess
the corresponding restoreSelection() twins.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The selection was remembered/restored anytime the sort-order
changed. Yet, this is only necessary if the view (tree, list)
changes. Therefore, handle the selection only if this is the
case.
This automatically fixes the problem of the trip-selection
not being remembered if the view doesn't change. If the view
does change, trip selection is lost. But since the list view
doesn't have trips to start with, losing trip-selection seems
like an understandable behavior.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On desktop, show the a sort indicator to give a visual feedback on changes
of the sort order. This is trivially done by calling the
setSortIndicatorShown() function in DiveListView's constructor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On desktop, clicking on a column header sorts the dive-list. This
has the interesting property that every click reverses the sort
order (unless changing from list to tree-mode). The much more
common idiom seems to be to define a default sort order for each
column and switch to that when changing sort-column. Switch order
after clicking the same column again.
Implement this more common behavior. For now, sort # and date
in descending, all other columns in ascending order.
While doing this, use the proper enum (NR) for setting the default
sort-column instead of its integer representation (0).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The last use of the LocationInformation::startEditDiveSite()
signal was removed in ff26ffe0d0.
Remove its declaration.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In commit 9829e49815 the dive
selection code was moved from the filter to the dive list.
As a consequence of that change, the selectionChanged signal
was not emitted anymore and therefore the map widget was not
informed of the new dive site list. This had funky effects on
the dive-site editing. Notably, changing the location would
move the map, but not update the flag.
Explicitly emit selectionChanged in filterFinished() to fix
dive site editing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In case of big log files, where MAX_TANK_INFO is reached, tank_info[i] != NULL should be checked after i<MAX_TANK_INFO
Signed-off-by: Simeon Geiger <simeon.geiger@gmail.com>
This will display the dive site coordinates after the Location label if
there are no associated tags from reverse geolookup. Thus it'll be
clearer for users that we do have GPS location stored for the dive, and
might be able to see more easily if the recorded coordinates are
correct.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
There was still code in MainTab::updateDiveSite() related to
dive-sites obtained from the obsolete web-service. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DiveListView, the result of model() was dynamically cast to
QSortFilterProxyModel. But then, only the virtual match() function
was used. The whole point of virtual functions is that you can
cast them on the base-class and it will execute the function of
the derived class. Thus, remove these casts and operate directly
on the QAbstractItemModel base class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After invalidating the filter, the dive-selection was modified to
ensure that at least one dive is selected. This was done in the
filter code, but it seems preferrable to do this in the dive-list
code, which has direct access to the selection-model.
Therefore, move the code from MultiFilterSortModel to DiveListView.
While doing so, split the code in DiveListView into more functions to:
1) Get the index of the first dive (if any).
2) Select the first dive (if any).
This allows a distinct size reduction of conditional compilation
in MultiFilterSortModel (accesses to MainWindow are not possible
in mobile code).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
And fix another bug in this area of the code. It appeared that
the gflow/gfhigh and conservatism deco parameters where not
enabled at startup, but after toggling the VPM vs BUEHLMANN setting
they were.
So, fix this as well.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The deco parameters need special treatment to wire them up to the
underlying deco model code. And with the new preferences setup this
is a lot of boilerplate.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
On dive-download old dives are deselected and a new one is selected.
If no dives were downloaded, accordingly no dives were selected.
This deselect only dives if at least one dive was downloaded.
Fixes#1793
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used to track whether we had selected the native BT mode in the
download dialog. But the information is redundant as we can tell from the
device name whether this is a BT/BLE download or not.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Does not solve any problem, but might help users that are confused
about the next/prev DC menu items, to select a different profile
for the currently selected dive. So, enable these menu items only
for dives where more than one DC is used.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Comits f427226b3b and 43c3885249 of the undo series introduced 2 calls
of autogroup_dives() without checking the autogroup global boolean.
This is a bug. An import from DC (for example) then triggers an
autogrouping, the divelist is autogrouped, and the UI button
is off.
This commit solves this. I've chosen for a guard in the autogroup_dives()
that now is a no-op when called when the user did not select autogrouping.
In additon, simplified the other calls to this function, as we do
not need to check before calling any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Instead of the weirdly named "information" and the inconsistent
"dive_list" use the logical "mainTab" and the camel-cased
"diveList", respectively.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The keeps track of different sub widgets needed by other parts
of the code, notably:
MainTab
PlannerDetails
PlannerSettingsWidget
ProfileWidget2
DivePlannerWidget
DiveListView
Access to these widgets was provided with accessor functions.
Now these functions were very weird: instead of simply returning
pointers that were stored in the class, they accessed a data
structure which describes the different application states.
But this data structure was "duck-typed", so there was an
implicit agreement at which position the pointers to the
widgets were put inside. The widgets were then down-cast by
the accessor functions. This might make sense if the individual
widgets could for some reason be replaced by other widgets
[dynamic plugins?], but even then it would be strange, as one
would expect to get a pointer to some base class.
Therefore, directly store the properly typed pointers to the
widgets and simply remove the accessor functions. Why bother?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the dive-site-edit widget, a copy of the current dive site was
used to store the old (pre-edit) data. This is not necessary, since
we can simply access the data in the original dive site. Thus,
replace the subobject by a simple pointer.
This is part of a series to replace dive-site uuids by pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The displayed_dive_site object is used in the dive-site-edit widget
to store the old (before-edit) data. But it was also used to store
the GPS data when changed on the map or the input box. Very confusing.
Instead, use the text field as only authoritative source of the
GPS data.
This introduces a small behavioral change: when changing the text
of the GPS text field, update the list of dive sites at the same
position.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive-site-edit widget uses a copy of the to-be-edited site
to compare with old values. Generally, this seems overkill
(the original dive-site can be used for such a comparison).
But one place where it can't simply be removed is the taxonomy,
because the widget needs a place to store the unsaved data.
Change the code to use an explicit taxonomy structure instead
of the one provided in the copy. This should ultimately allow
removal of the latter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The global object displayed_dive_site is used a a backing-store
by the dive-site-edit widget. All external accesses were removed,
therefore make the object local to the widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The global object "displayed_dive_site" is used to store the
old dive site data for the edit-dive-site widget. The fields
of the widget were initialized from this object in the show
event. Therefore the object was updated in numerous parts of
the code to make sure that it was up-to-date. Instead, move
the initialization of the object to the function that also
initiatlizes the fields. Call this function explicitly before
showing the widget.
This makes the data-fow distinctly easier to understand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove a comment which is outdated in two ways:
1) The global variable "displayed_dive_site" was not used at all.
2) The location box cannot be used to rename dive sites.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
MainTab::refreshDisplayedDiveSite() was used after dive-site edit
to update the information of the location entry box. This should
always display the dive-site of the currently shown/edited dive,
therefore it makes no sense to use the displayed_dive_site here.
Simply use the dive site of displayed_dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code had a special case for dive-editing mode:
The dive site uuid of displayed_dive_site instead of displayed_dive
was used.
This makes no sense, because displayed_dive_site is only used by
the dive-site-edit widget, which firstly cannot be activated
during dive-edit and secondly doesn't change the dive site id
anyway.
Thus, use the dive site of the currently edited/displayed dive
in all cases.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When tabbing through the dive-info screen, a dive-master and a
dive-buddy would be added. The reason is that pressing tab would
be interpreted as a text-input. Disable this behavior by calling
setTabChangesFocus(true) in the TagWidget constructor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If we update the device with a shortcut button, this is the reliable way to get
the information we need.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously nothing was shown while we were trying to connect; now we show a busy
indication in the progress bar and ensure that the 'waiting to connect' text is
displayed. The progress bar switches back to showing actual progress once we have
connected and are downloading data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Separated from the previous commit as I do not like big whitespace
changes in a small functional commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
While trying to understand more of the big change from PR 1528,
I found that the divelist was marked changed while it was not
changed at all. Reason is simple. The MODIFY_DIVES code assumes
its called only for truly changed data. But in case of saving
tagged strings, it was not.
This fixes this. And I do not believe this has any visual effects.
Further, the now broken indentation is fixed seperately.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The location information shows a list of dive sites at the
same location as the edited dive site. This was done by passing
a function to an "SsrfSortFilterProxyModel". Unfortunately,
the latter does only support function pointers without state
and therefore had to access the global "displayed_dive_site"
object.
Replace the SsrfSortFilterProxyModel by a proper subclass of
QSortFilterProxyModel that contains information on the position
and id of the currently edited dive site.
Update the filter model if the location of the dive site changes.
This introduces a behavioral change: editing the GPS location
will lead to an updated list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of reading out the global object "displayed_dive_site",
pass the dive site to be edited in arguments to
prepareForGetDiveCoordinates() and enter edit mode.
Simplify the code in LocationInformationWidget by not using
signals to call the prepareForGetDiveCoordinates() function.
While doing this, collect common code in accept() and reject()
in the already existing resetState() function.
This is another entry in a series of commits that makes
data-flow more clear by removing access to the global
"displayed_dive_site" object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The setEditMode(bool) function behaves very differently, when
entering and exiting edit mode. Therefore, split it in two
versions. This will allow to pass arguments that make sense
only when entering the edit mode.
Since setEditMode() doesn't exist anymore, turn the editMode
Q_PROPERTY line to the MEMBER version. Accordingly, remove
the reader function. If QML wants to enter edit mode, it
should invoke the appropriate function and not simply set
the flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The coordinates of a "dragged flag" were passed out-of-bound via
the global "displayed_dive_site" object and then a signal was sent
to notify of the changed coordinates.
Instead, pass the coordinates directly via the signal. This makes
the data- and control-flow more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used by LocationInformationWidget to instruct the map
that the coordinates of the current dive site has changed.
There is no reason why this couldn't be a function call, as no
other object ever connect()s to this signal. In fact, such a
function already exists viz. updateLocationOnMap.
Therefore, replace the signal by a simple function call.
Moreover, the uuid and coordinates of the dive site were transported
via the global "displayed_dive_site" object. Instead, pass this
information in the parameters of the function. This makes it
easier to reason about data- and control-flow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The reverseGeoLookup() fetches dive-site data via GPS coordinates.
The coordinates and the result were passed via the global
"displayed_dive_site" object. To make data-flow more clear,
pass data as in and out parameters instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fetching the taxonomy from GPS coordinates was implemented in
a QThread. But the only access to the main function was a
direct call to run(). Thus, the thread was *never* started.
The function call was always asynchronous [it was using an
event loop though, so the UI doesn't hang]. Notably this
means that the signals connected to the thread would never
fire. And the spinner would never be activated.
Thus:
1) Turn the thread into a simple function.
2) Remove the spinner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing a dive, in the location box a list of dive sites is
shown containing the distance to the current dive site. This was
implemented via the global displayed_dive_site object, which is
set when switching between dives. This seems like an unnecessary
indirection. Instead, use the current_dive macro.
This is part of a series to refactor dive-site handling to use
pointers instead of UUIDs and a general push to reduce global state.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Planned dives were still added by directly calling core code.
This could confuse the undo-machinery, leading to crashes.
Instead, use the proper undo-command. The problem is that as
opposed to the other AddDive-commands, planned dives may
belong to a trip. Thus, the interface to the AddDive command
was changed to respect the divetrip field. Make sure that
the other callers reset that field (actually, it should never
be set). Add a comment describing the perhaps surprising
interface (the passed-in dive, usually displayed dive, is
reset).
Moreover, a dive cloned in the planner is not assigned a
new number. Thus, add an argument to the AddDive-command,
which expresses whether a new number should be generated
for the to-be-added dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of reloading all the filter, only increment / decrement the
count of the entries of added / removed dives.
Originally, this was planned to be done via the signals from the
divelist, but it turned out that this was suboptimal, because
if the filter decides that the new item is selected, this has to
be done *before* adding the dive. Otherwise, it wouldn't be shown.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding dives to the list, set the filter flag accordingly.
Thus, dives that are hidden by the filter are not shown on
redo/undo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The command-objects select a current item, but this selection
was not propagated to the front-end. The current item is the
base for keyboard-navigation through the dive-list and therefore
should be set correctly.
It took some experimentation to get the flags right:
QItemSelectionModel::Current
Hopefully, these are the correct flags across all supported
Qt versions!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If dives are deleted, the trip(s) containing the dives are expanded.
Thus, on undo it seems natural to re-expand the trip.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The MergeDives and SplitDive commands used addDive() and removeDive()
calls to manage their dives. Unfortunately, these calls don't send
the proper signals and thus the dive-list was not updated. Instead,
use one- and two-element vectors, which are passed to addDives()
and removeDives() [note the plural].
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Select the proper dives after the add, remove, split and merge
dives commands on undo *and* redo. Generally, select the added
dives. For undo of add, remember the pre-addition selection.
For redo of remove, select the closest dive to the first removed
dive.
The biggest part of the commit is the signal-interface between
the dive commands and the dive-list model and dive-list view.
This is done in two steps:
1) To the DiveTripModel in batches of trips. The dive trip model
transforms the dives into indices.
2) To the DiveListView. The DiveListView has to translate the
DiveTripModel indexes to actual indexes via its QSortFilterProxy-
model.
For code-reuse, derive all divelist-changing commands from a new base-class,
which has a flag that describes whether the divelist changed. The helper
functions which add and remove dives are made members of the base class and
set the flag is a selected dive is added or removed.
To properly detect when the current dive was deleted it
became necessary to turn the current dive from an index
to a pointer, because indices are not stable.
Unfortunately, in some cases an index was expected and these
places now have to transform the dive into an index. These
should be converted in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DiveListView, we have a very fundamental problem: When
On the one hand, we get informed of user-selection in the
DiveListView::selectionChanged() slot. This has to set the
correct flags in the C-backend.
On the other hand, sometimes we have to set the selection
programatically, e.g. when selecting a trip. This is done
by calling QItemSelectionModel::select().
But: this will *also* call into the above slot, in which
we can't tell whether it was a user interaction or an
internal call. This can lead to either infinite loops or
very inefficient behavior, because the current dive
is set numerous times.
The current code is aware of that and disconnects the
corresponding signal. This is scary, as these signals are
set internally by the model and view. Replace this
by a global "command executing" flag in DiveListNotifier.
The flag is set using a "marker" class, which resets the flag
once it goes out of scope (cf. RAII pattern).
In DiveListView, only process a selection if the flag is not
set. Otherwise simply call the QTreeView base class, to reflect
the new selection in the UI.
To have a common point for notifications of selection changes,
add such a signal to DiveListNotifier. This signal will be
used by the DiveListView as well as the Command-objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't delesect dives, when unregistering them from the backend.
If a previously selected dive is added, select it in the dive-list.
For this purpose introduce a SELECTED_ROLE to query the DiveTripModel
for selected dives.
Unfortunately, when adding multiple selected dives, current_dive_changed
is called for each of them, making this very slow. This will have
to be fixed in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Now, that pointers to dives are stable, we might just as well
use dive * instead of the unique-id. This also affects the
merge-dive command, as this uses the same renumbering machinery.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We have to avoid that undo/redo removes the currently edited
dive from under our feet. This code can be removed once proper
undo/redo (including editing) is implemented.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the autogroup flag is set, search for appropriate trips in
DiveAdd() and add the dive to this trip. If no trip exists, add
a new trip.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Previously, each dive-list modifying function would lead to a
full model reset. Instead, implement proper Qt-model semantics
using beginInsertRows()/endInsertRows(), beginRemoveRows()/
endRemoveRows(), dataChange().
To do so, a DiveListNotifer singleton is generatated, which
broadcasts all changes to the dive-list. Signals are sent by
the commands and received by the DiveTripModel. Signals are
batched by dive-trip. This seems to be an adequate compromise
for the two kinds of list-views (tree and list). In the common
usecase mostly dives of a single trip are affected.
Thus, batching of dives is performed in two positions:
- At command-level to batch by trip
- In DiveTripModel to feed batches of contiguous elements
to Qt's begin*/end*-functions.
This is conceptually simple, but rather complex code. To avoid
repetition of complex loops, the batching is implemented in
templated-functions, which are passed lambda-functions, which
are called for each batch.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
insert_trip() adds a trip to the backend, but merges trips if
there exists a trip with the same date. This is a disaster
for the MergeTrips command, because this command adds a new
trip and removes the previous two. Of course if the added trip
is merged, this cannot work.
Therefore, add an insert_trip_dont_merge() function, which
adds the trip, but doesn't merge.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This refactors the undo-commands (which are now only "commands").
- Move everything in namespace Command. This allows shortening of
names without polluting the global namespace. Moreover, the prefix
Command:: will immediately signal that the undo-machinery is
invoked. This is more terse than UndoCommands::instance()->...
- Remove the Undo in front of the class-names. Creating an "UndoX"
object to do "X" is paradoxical.
- Create a base class for all commands that defines the Qt-translation
functions. Thus all translations end up in the "Command" context.
- Add a workToBeDone() function, which signals whether this should be
added to the UndoStack. Thus the caller doesn't have to check itself
whether this any work will be done. Note: Qt5.9 introduces "setObsolete"
which does the same.
- Split into public and internal header files. In the public header
file only export the function calls, thus hiding all implementation
details from the caller.
- Split in different translation units: One for the stubs, one for
the base classes and one for groups of commands. Currently, there
is only one class of commands: divelist-commands.
- Move the undoStack from the MainWindow class into commands_base.cpp.
If we want to implement MDI, this can easily be moved into an
appropriate Document class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
AddDivesToTrip, CreateTrip, AutogroupDives, RemoveAutogenTrips
and MergeTrips basically all did the same thing as RemoveDivesFromTrip,
which was already implemented. Thus, factor our the common functionality
and hook it up to make all these functions undo-able.
Don't do the autogroup-call everytime the dive-list is rebuilt
(that would create innumberable undo-actions), but only on dive-load /
import or if expressly asked by the user [by switching the autogroup
flag].
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The whole undo system assumes that the indexes in the dive table
do not change under its feet. On desktop, there seems only one
exception left: editing of the dive time. To circumvent this,
hook editing of the dive-time to the already existing UndoShiftTime
command.
This introduces a temporary UI-inconsistency: this is the only
edit that is reflected in the undo-list. This will be fixed in
due course, when other edit actions are also made undoable.
UndoShiftTime is changed to take pointers to dives (which should
be stable by now) instead of uniq-ids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On dive editing, for every changed field the code looped through
the whole dive-list and modified the selected dives. Instead,
get the list of selected dives once and use that.
Whereas this may look like a gratuitous optimization, it will
make things easier for subsequent commits. Notably, we can
pass the list of selected dives to an "UndoObject".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Keeping undo-history across load makes little sense. The user was
expressly reminded that they have unsaved work.
For import (from other logs or the dive-computer) an undo-functionality
would be desirable. Nevertheless, this is rather complex since
new and old dives are merged. Implementation would require a finer
backend<->undocommand interface. Thus, leave this for now until more
experience with the undo system is acquired.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For this, an output-parameter was added to the backend merge_dives()
function. When non-zero, instead of adding the merged dive to
the preferred trip, the preferred trip is returned to the caller.
Since the new UndoObject, just like the delete-dives UndoObject,
needs to remove/readd a set of dives, the corresponding functionality
was split-off in a helper function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For this, the core functionality of the split_dive() and
split_dive_at_time() functions were split out into new
split_dive_dont_insert() and split_dive_at_time_dont_insert(),
which do not add the new dives to the log. Thus, the undo-command
can take ownership of these dives, without having to remove them
first.
The split-dive functionality is temporarily made desktop-only
until mobile also supports "UndoObjects".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Play manual addition of dives via an UndoCommand. Since this does in
large parts the same thing as undo/redo of dive deletion (just the
other way round and only a single instead of multiple dive), factor
out the functions that add/delete dives and take care of trips.
The UI-interaction is just mindless copy&paste and will have to
be adapted.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Both callers have a dive * and transform that into an id,
the callee transforms it right back to the dive *. Simply pass
the dive directly. This will allow us to use the function for
dives that have not yet been added.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The original undo-code was fundamentally broken. Not only did it leak
resources (copied trips were never freed), it also kept references
to trips or dives that could be changed by other commands. Thus,
anything more than a single undo could lead to crashes.
Two ways of fixing this were considered
1) Don't store pointers, but unique dive-ids and trip-ids.
Whereas such unique ids exist for dives, they would have to be
implemented for trips.
2) Don't free objects in the backend.
Instead, take ownership of deleted objects in the undo-object.
Thus, all references in previous undo-objects are guaranteed to
still exist (unless the objects are deleted elsewhere).
After some contemplation, the second method was chosen, because
it is significantly less intrusive. While touching the undo-objects,
clearly separate backend from ui-code, such that they can ultimately
be reused for mobile.
Note that if other parts of the code delete dives, crashes can still
be provoked. Notable examples are split/merge dives. These will have
to be fixed later. Nevertheless, the new code is a significant
improvement over the old state.
While touching the code, implement proper translation string based
on Qt's plural-feature (using %n).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For increased maintainability, use the same columns, roles and
the same accessor function for both dive-site models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Under certain conditions the user was presented an ugly
"invalid dive site" message. The condition would arise because
the proxy-model which selects the list of dive sites and the code
which creates a proposed dive site name had different filter
conditions:
- The proxy would select any dive site containing the text
- The name-proposing code searched for dive sites *starting*
with the text.
If the user entered a text contained by a dive site name, but
no dive site would start with the second line was filled with
a dummy text. This text would be kept if it contained the text
entered by the user.
To avoid this problem, if no dive site is found, use an empty
string instead. This will be filtered out by the proxy because
it does not contain the user-entered string.
Yes, that's horribly subtle, therefore add a comment. But ultimately,
this should be solved in a less brittle way.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive site list was connected to centerOnDiveSite(). Apparently,
the currently selected dive site should have been shown in the map.
Yet, this never worked, because the actual dive site of the selected
dive had precedence in centerOnDiveSite().
It seems that centerOnDiveSite() had actually to purposes:
1) center on the passed in dive site
2) center on the dive sites of the selected dives
Therefore, split this function in two separate functions for
each of these use-cases. This allows us to remove some pre-processor
magic (mobile vs. desktop) and to remove a parameter from the
MainTab::diveSiteChanged() signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If only selected dives were exported into HTML, the statistics would
nevertheless cover all dives. A counter-intuitive behavior. Fix by
adding a selected_only flag to calculate_stats_summary().
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The statistics of the selected dives were calculated
a) into a global objects and
b) at a completely different place than where they're used.
There's no plausible reason for either. There fore render
into a caller-provided structure at the place of use.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Statistics were calculated into global variables every time the
current dive was changed.
Calculate statistics only when needed and into a structure
provided by the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_imported_dives() is more efficient for downloaded than for
imported (from a file) dives, because it checks only the divecomputer
of the first dive.
This condition is checked via the "downloaded" flag of the first
dive. Instead, pass an argument to process_imported_dives().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dives were directly imported into the global dive table and then
merged in process_imported_dives(). Make this interface more flexible,
by passing an independent dive table.
The dive table of the to-be-imported dives will be sorted and merged.
Then each dive is inserted in a one-by-one manner to into the global
dive table.
This actually introduces (at least) two functional changes:
1) If a new dive spans two old dives, it will only be merged to the
first dive. But this seems like a pathological case, which is of
dubious value anyway.
2) Dives unrelated to the import will not be merged. The old code
would happily merge dives that were not even close to the
newly imported dives. A surprising behavior.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old surface interval calculation had fundamental issues:
1) process_all_dives(), which calculates the statistics over *all*
dives was used to get the pointer to the previous dive.
2) If two dives in the table had the same time, one of those would
have been considered the "previous" dive.
3) If the dive, for which the surface interval is calculated is
not yet in the table, no previous dive would be determined.
Fix all this by creating a get_surface_interval() function and
removing the "get previous dive" functionality of process_all_dives().
Remove the process_all_dives() call from TabDiveInformation::updateData().
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
By making this modal, we can use a local variable and remove the
nasty "deleteLater()" hack to reclaim the resources after the
dialog closes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No point in having this in the header file as it is not used
outside.
Remove the CSVAPPS macro, as this was never used. One thing less
to maintain.
Remove the sentinel with name = NULL, as we can simply use
range-based for.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Poseidon MkVI logs (.txt) were special cased in MainWindow.cpp,
which led to a user-interface inconsistency. In some cases
[user chooses ".txt" (non-Poseidon) and ".csv"], *two*
import-dialogs were shown.
Move handling of Poseidon MkVI logs into DiveLogImportDialog.
There are already other "special" cases handled in this dialog.
At the moment, this shows the first 10 depth-values, which is
kind of useless, as this will all be at surface level. We
might think about something more useful.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This reverts commit 1c4a859c8d,
where the override modifiers were removed owing to the noisy
"inconsistent override modifiers" which is default-on in clang.
This warning was disabled in 77577f717f,
so we can reinstate the overrides.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
UserSurveyServices derives from WebServices and therefore has
to define three pure virtual functions [startDownload(),
startUpload(), buttonClicked()] as no-ops. Interestingly,
a comment in the header says
"need to declare them as no ops or Qt4 is unhappy"
which is of course not true as these functions are not
declared by Qt.
There seems to be no point in deriving from WebServices,
therefore don't do it. These function definitions can then
be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QByteArray::data() provides access to the underlying data
for direct manipulation. Thus, the construct
csv = fileNamePtr.data();
found in MainWindow::importTxtFiles() suggests that modifications
to csv also affect fileNamePtr. This is *not* the case, because
csv itself is a QByteArray. It is therefore constructed from
the data.
Replace this treacherous construct by a simple assignment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On CSV import, the dive list was recalculated after the import
dialog was shown. This is pointless, as no dives are yet imported.
Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The non-modal DiveLogImportDialog was only implicitly deleted when
the MainWindow was destroyed. Instead hook into the accept() and
reject() functions and schedule for deletion with deleteLater().
Quite the horrible proposition, but in line with Qt's object model.
Consider making the dialog modal instead. There seems to be no
upside for this being modal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In d815e0c947 a dive_table pointer
was added to the parsing functions to allow parsing into tables
other than the global dive table. This will be necessary for undo of
import and implementation a cleaner interface. A few cases, notably
CSV and proprietary formats were forgotten.
Implement parsing into arbitrary tables also for these cases.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A few of these prototypes were already in import-csv.h.
Put them in an 'extern "C" { ... }' block.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This still doesn't do the right thing for BT/BLE connections on a Mac, but it
should work on Linux and possibly Mac.
We definitely need to figure out how to get the Mac to successfully connect back
to a BT/BLE device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
process_dives() is used to post-process the dive table after loading
or importing. The first parameter states whether this was after
load or import.
Especially in the light of undo, load and import are fundamentally
different things. Notably, that latter should be undo-able, whereas
the former is not. Therefore, as a first step to make import undo-able,
split the function in two versions and remove the first parameter.
It turns out the the load-version is very light. It only sets the
DC nicknames and sorts the dive-table. There seems to be no reason
to merge dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On macOS the first of the four DC buttons was highlighted for some reason.
Explicitly setting autoDefault to no solved that problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The straight forward code to update the currentIndex of the combobox doesn't
appear to work on macOS (but works fine on Linux). Calling the event loop and
then calling update afterwards seems very unintuitive, but it appears to fix
the issue in my testing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The algorithm tries to keep the order of the buttons the same. So if a dive
computer was used that's already remembered, don't reorder the buttons. But if
a new dive computer is used, add it as the first one and move the others back,
potentially dropping the oldest one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply create the buttons that can be used as shortcuts to previously used dive
computers. This isn't hooked up at all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On import of dive media, the timestamp is read from the
metadata to check if the image belongs to the selected dives.
The pictures are then listed in a dialog.
Currently, the metadata is read twice if images are outside
of a dive: once in picture_check_valid() and if it turns
out that the picture is not valid again in picture_get_time()
to display the proper timestamp.
Even though metadata-extraction is reasonably fast, this is
a bit of an embarrassment.
Instead, read the timestamps only once in the constructor of
the dialog and from then on only used these timestamps. Keep
the timestamps in a QVector. Rename the picture_check_valid()
function to picture_check_valid_time() and pass a timestamp
instead of a filename.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The << alternative can reallocate the vector, but we know it's size, so
preallocate.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unamed namespace behaves the same way as static variables in C source.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A minor change to the UI. The wording of the two items in the dive
list context menu "Load image(s) from file(s)" and "Load
image from web" are updated since we now deal with both images
and videos. So it becomes "Load media from file(s)".... etc.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Nowadays, we edit dives just by starting to enter data for the dive.
There is no need to explicitly ask to start editing the dive, using the
now removed menu option. This was a left-over of a long past history.
This is fallout from PR #1673.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
These also showed up as concerns when creating translation strings.
Adding them thankfully didn't create new strings, but not having them
potentially leads to incorrect runtime behavior.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As described in the referenced issue, we where able to navigate to
nonlogical static pages (like information, statistics. extra data) when
adding a dive. These are output style pages that make no sense on
edit or add. Further, disable access to some pages when entering edit mode.
Notice that the small change in file mainwindow.cpp is simply
because this this not work at all, and became superfluous any
way.
Fixes: #1445
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Add a checkbox that triggers replacement of all English characters by
x's in notes, buddy, dive guide and (while we are at it) suit.
This is ment for people sharing logs for debugging that are concious
about privacy issues. It leaves the lenth of strings in tact as well
as special charcters as those might be needed to track down a particular
parsing problem.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
1) Add a missing <div>
2) More importantly: recognize html content via <div>-tags instead of
<table>-tags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
