We can do the same with get_picture_idx(). Yes, it is a bit more
unwieldy. However a full reimplementation seems not worth it.
We could make this a one-liner helper function though.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code is rather complex. Firstly, we have different representations
of pictures throughout the code. Secondly, this tries to do add the
pictures in batches to the divepicture model and that is always rather
tricky.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
By using a std::string instead of a C-string, memory management
becomes so much simpler! This class will be used for keeping track
of deleted/added pictures in the undo system.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Even though the functionality is seemingly trivial, this is a bit
invasive, as the code has to be split into two distinct parts:
1) Post undo command
2) React to changes to the divelist
Don't compile that code on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This needs a slight change to the macro, because here we sort by
value type. Yes, from a C-programming point of view this is horrible,
however a decent compiler should just inline everything and not
pass around value types.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A function that gets the index of a picture in a picture table
given its filename. Since we are going to identify pictures by
their filename, we will need this function in the undo code.
Use the function in the remove_picture() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency with equipment, use our table macros for pictures.
Generally tables (arrays) are preferred over linked lists, because
they allow random access.
This is mostly copy & paste of the equipment code.
Sadly, our table macros are quite messy and need some revamping.
Therefore, the resulting code is likewise somewhat messy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since this doesn't touch struct dive, dive.c is not an appropriate
place for this function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The Bühlmann factors were cached in a thread-safe hashmap. It seemed
somewhat dubious that entering a critical section and doing a hash-lookup
would be significantly faster than a simple exp() call.
Indeed, in a very cache friendly test (16 entries, tight loop) calling the
factor() function 32 000 000 times from a different translation units we get:
- with cache: 604 ms
- without cache: 266 ms
Therefore, remove the cache. Given that 32 000 000 calls take only 266 ms,
it appears not sensible to try to optimize this function anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It was suggested in a review of a previous patchset that we should
capitalize the use of "use dc" to "Use DC" - but if we were going
to do that we should do it everywhere, not just in the one place.
This is the followup to do that.
Signed-off-by: Monty Taylor <mordred@inaugust.com>
In the code, the difference between SALTYWATER and SALTWATER is hard
to see. More importantly, in the UI - Brackish is the word for water
that has more salt that freshwater but less salt that seawater. The
docs already use the word to clarify what is meant.
These can be useful in a printed divelog, especially if the
log entry is also showing weight and exposure suit.
Signed-off-by: Monty Taylor <mordred@inaugust.com>
The DiveListView had a singleSelectedTrip function that
returns the selected trip if exactly one trip is selected.
This could be very slow if numerous non-trip items were
selected, because all the selection indices were back-
translated by the proxy model.
This could make selection changes very slow, because the
MainTab used said function to determine whether it should
show trip or dive data.. Indeed, with a 3500 dive test log,
when selecting all dives in tree mode, the updating of the
TabWidgets is sped up from 130 ms to 5 ms this commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView would touch the selection-innards directly.
Let's encapsulate that. Moreover, take care to reset the trip
selection when resetting the core data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to dives add a selection flag for trips. The reason
being that search for a selected trip can be painfully slow when
we do it through Qt's proxy model.
Make sure to deselect trips when they are removed from the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No point in slurping in all of dive.h for translation units that only
want to do some time manipulation without ever touching a dive.
Don't call the header "time.h", because we don't want to end up in a
confusion with the system header of the same name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This included QFile, which is fatter and not needed here. Include
QFile only in the actual translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There appears to be no reason to slurp in all dive.h when compiling
membuffer.c. units.h might not seem like the perfect place, but it
is the most fitting I found.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency: declare enumerate_dives as extern, since we do that
for all other C-functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No external caller of this function exists. Moreover, turn the return
type to void, as it only returned the passed-in plot_info and no
caller used that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It make debugging much easier if the function signature tells you
that a parameter is not altered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When plotting profiles with surface segments, there were strange
artifacts. As we found out with Robert, these were due to the fact
that the calculated maxtime was set to the last event which is just one
second inside the surface segment. This terribly confused the profile
code. For example, it didn't properly allocate samples for the surface
segment.
Thus, when calculating maxtime, consider the last sample beyond the
last event.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When we had fixed-sized cylinder arrays, the planner used the last
empty cylinder for "surface air". This was not recognized by the UI
as a separate cylinder, because "empty cylinder" was the sentinel for
the end of the table. The conversion to dynamically sized cylinder
tables broke this code: everytime the surface segment is changed,
a new dummy cylinder is added, which is visible in the UI.
As a very temporary stop-gap fix, emulate the old code by creating
a cylinder and then setting the end-of-table to before that cylinder.
This means that we have to loosen the out-of-bound checks.
That's all very scary and should be removed as soon as possible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will be temporarilly used by the planner to mark consumption of
air at the surface. Do this by creating a new function add_cylinder,
which replaces add_to_cylinder_table() and takes care of always adding
a dummy cylinder at the end of the table. Make the original
add_to_cylinder_table() local, so that it cannot be accessed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used by the divelist to check wether a selection change is
programmatical or user-initiated. However, since there is only one
entry point for programmatical selection changes, this is not needed
anymore. Remove it - this removes an inter-module dependency.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We no longer use libusb to access USB devices on Android, therefore
there's no point including libusb in our build. Also, we have never even
attempted to run the tests on Android, so let's not even pretend to
support building them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move this to the core so that desktop and mobile don't have
to call this explicitly. Matter of fact, mobile didn't call
this. It is unclear, whether that was even used on mobile,
though.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It makes no sense to keep the device nodes if all the other data
is cleared. Let's do this automatically and not explicitly.
This ensures that the function is also called on mobile.
Currently it was only called on desktop.
Weirdly, the parser-tests were expecting that the device nodes
were not reset by clear_dive_file_data() and therefore divecomputers
were accumulating in the test results. Thus, the additional
computers had to be removed from the expected test results.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter sets the maximum date to now. This is so confusing when
you manually add a dive and it isn't shown, because it is slightly
in the future. Add seven days, that should help.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This only checks the first divecomputer as the semantics for
multiple dive computers with different dive modes are not
clear. Should we check them all?
The implementation is a bit hackish: the indexes [0...n] of the
combobox are mapped onto [-1...n-1], where -1 means don't filter
and n-1 is the last valid dive mode.
Implements #2329
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Arguably, returning 0 for a dive with no cylinders is wrong, since the
0 is a valid cylinder id, however that cylinder doesn't exist. Instead,
return -1. All callers of explicit_first_cylinder() return early anyway
for dives with no cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we removed MAX_CYLINDERS, we have the possibility of dives
with no cylinders. In such a case, setup_gas_sensor_pressure()
would do invalid read- and write-accesses. Therefore, return
early in such a case.
Reported-by: Chirana Gheorghita Eugeniu Theodor <office@adaptcom.ro>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Turns out that at least on Android libgit2 sometimes rejects valid
certificates. And I cannot quite figure out when and why. But since we
actually already checked the validity of the certificate when we called
canReachCloudServer() (and the Qt code handles certificates correctly),
we'll simply ignore this here and override the check to always return
true for our cloud server.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I would have bet money that Android used to send stderr to the logcat
log, but apparently it doesn't (anymore?). So in order to be able to
have a chance to debug weird cloud storage issues on Android, let's do
some wholesale replacement of fprintf(stderr,...) with our own version
of the INFO macro that we long ago borrowed from libdivecomputer (and
rename it to ensure we don't have a conflict there).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
free_plot_info_data() freed the pressure-data, but didn't set the
value to NULL. Thus, when the plot_info was reused, a double-free()
could ensue.
Crash condition: export the profiles of multiple dives with pressure
data.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will be used by the test to clean up test branches that are created
on the server. Since we aren't testing that functionality (it's not
something that Subsurface itself ever does) the helper prints out errors
it encounters, but doesn't report them back to the caller.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If you had one of the unfortunate local git caches with a local HEAD
just pointing to 'master', this will make note of that and then fix it
up to use the proper branch name in the cache repository.
[Dirk Hohndel: demoted from error to fprintf as most users won't care]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In create_and_push_remote(), we set up the remote tracking etc to use
the proper branch name, but never actually set up the initial local
branch for the new cache repository at all. So the repository would end
up with the default 'master' branch, instead of the branch name it
should have.
This went unnoticed, because most setups start by initializing the git
caches by cloning from the cloud, and that worked fine.
Debugged-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a crash: when the undo commands removed a dive from
the list, the fulltext cache was not cleared. If now the divelist
is reset and then the undo-command deleted, deletion of the owned
dive tries to remove it's fulltext cache, which doesn't exist
anymore.
For reasons of symmetry, when readding the dive, its fulltext
has to be registered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When initializing the fulltext-cache and the dive-list, every
100 dives a notification was shown. I had a feeling that this
made startup significantly slower, but that could have been
purely psychological.
Therefore I measured and indeed, removing the fine-grained
notification, it becomes *significantly* faster. For a 3500
dives test log with mobile-on-desktop:
Initialization of the fulltext: 1350 ms -> 730 ms (-46%)
Initialization of the divelistmodel: 689 ms -> 113 ms (-83%)
Let's remove the fine-grained notification. There *is* a visual
indication of work-in-progress anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The compiler complained about this and it seems the
function does not need it.
Additional-test-suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The planner does not know about events except gas
changes. But if the dive comes from the log, we
should preserve the dive computer events. At least
those that happend before we started to delete
waypoints to let the planner take over.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This fixes a bug: when deleting a picture when multiple dives
were selected, possibly the wrong dive was invalidated.
Thus, the dive wouldn't have been saved to the git repository.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This isn't really a useful performance improvement, but it's still better,
IMHO, because we don't have a less specific match later on potentially change
an already executed match.
Because of our coding style the comment covering multiple cases of Pelagic dive
computers now is associated just with the first of those entries. I don't see a
way to do this differently without being in violation of our coding style, so
I'll just keep it like this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Both Shearwater Petrel and Petrel 2 identify as 'Petrel' as their BT and BLE
names. But only the Petrel 2 supports BLE, thus only the Petrel 2 shows up in
the list of known dive computers on iOS (which supports only BLE but not
BT-only). By switching this around to always pick Petrel 2 we now correctly
detect such a dive computer on iOS.
Fixes#2739
Reported-by: Rick Holcombe <wrh@nc.rr.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt hates empty ranges, and even for a non-empty range, this is better
implemented as a reset than a remove.
This fixes a crash that I have been able to create on iOS by rescanning
for devices on the download page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is the free_picture() function with the same functionality.
The compiler/linker should recognize that and remove the duplicate
code, but still...
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This never made sense and I think I just forgot to complete this code
when I first worked on it. Now we can see which version of Subsurface or
Subsurface-mobile created a merge.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While having the local user information in the repo on Linux seemed
clever when we implemented it, it's inconsistent with all the other
platforms. Let's just not do that unless the user has indeed set
a global name/email pair for git.
Instead indicate if this was Subsurface or Subsurface-mobile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function was not meant to be called with already existing data.
However, if it was, it cleared the words without clearing the fulltext
caches of the dives. This lead to crashes.
Be more resilient by not clearing the words: Already existing dives
are unregistered during the process of populating anyway. So this
now *should* work if new dives are added to the dive list and then
this function is called.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was named improperly: it was only used on freshly
loaded data. Indeed, attempts to use it to actually reload lead
to crashes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
parse_file() refused to load from a git repository if we already
had that repository and there were no changes. However, this only
checked the global divelist_changed flag, which does not track
undo-commands. Thus, after editing dives the user couldn't reload
from git.
Remove this check. It is somewhat questionable that the io layer
refuses to load from a repository anyway. Let the caller decide.
There appears to be a check_git_sha function for that purpose(?).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't overwrite the full cylinder when editing a single field.
Implement three "modes": editing of type, pressure and gasmix.
Don't consider individual fields, because some of them are
related. E.g. you can change the gasmix by setting the MOD.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use the user-editable MOD-pO2 preferences value when creating
a default cylinder. It is not clear to me, when that even has
a consequence, but it looks like the right thing to do.
Reported-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Apparently this was used to hide events in pre-Qt times. However,
that has already been reimplemented in different ways. Let's remove
that commented-out code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For undo, we want to create gas change events without adding them
immediately to the dive computer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since all the other event-functions are also defined there.
Ultimately, we should probably move them to their own
event.c translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is a slight complexity here owing to the fact that the profile
works on a copy of the current dive: We get a copy of the event and
have to search for the original event in the current dive. This
could be done in the undo command. Nevertheless, here we do it in
the profile so that when in the future the profile can work on a
non-copied dive we can simply remove this function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a DiveListNotifer::eventsChanged signal, which is emitted when
the events changed. This is very coarse, at it doesn't differentiate
between signal addition / editing / deletion. We might want to
be finer in the future.
Catch the signal in the profile-widget to replot the dive if this
is the currently displayed dive. Reuse the cylindersChanged() slot,
but rename it to the now more appropriate profileChanged().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We have a remove_event() function that
1) frees the event
2) works on the current divecomputer
3) compares the events because the profile has copies of events
However, for undo commands
1) we want to keep the event so that we can readd it later
2) we have to work on arbitrary divecomputers
3) we don't work with copies of events
Therefore, create a new remove_event_from_dc() function that
does all that. Moreover, make the event argument to remove_event()
const to (slightly) point out the difference in the API.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
add_event() creates and adds an event from the given parameters.
For undo, we want to do these separately, therefore split this
function in two parts: create_event() and add_event_to_dc().
Keep the add_event() function for convenience. Moreover, keep
the remember_event() call in there, so that undo-commands can
call remember_event() once, not on every undo/redo action.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In two cases we were passing the magic value 8 instead of the
symbolic SAMPLE_EVENT_BOOKMARK. Use the symbolic version instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinders in the events must be reordered if we remove
a cylinder. To avoid duplication of code, move the reordering
function into qthelper.cpp, though it might not be ideal
there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Do a simple copy & paste followed by a simple search & replace
to generate cylinder undo commands from weight undo commands.
Obviously, this is still missing the necessary code to keep
the dive-data consistent after cylinder editing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Moreover, move the declaration from dive.h to equipment.h.
The result is a) more consistent and b) more logical.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Turn the code in CylindersModel that creates a new cylinder for
addition into its own function to avoid code duplication. This
will be used from the undo commands.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We have a set_weightsystem() function. For symmetry, introduce
a set_cylinder() function so that we can more-or-less copy&paste
the weightsystem undo code for cylinder undo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinder undo commands will keep a copy of a cylinder
and therefore need the ability to free a cylinder object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We have a clone_weightsystem function. For symmetry, introduce
a clone_cylinder() function so that we can more-or-less copy&paste
the weightsystem undo code for cylinder undo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Especially on slower devices with a large dive list the startup time has
become really long. This callback allows us to give the user an idea of
what the app is doing during that time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In an attempt to reduce the number of global variables, don't use
a local buffer to store the currently loaded git-id. The git-id
itself is still a global variable, which in the future can hopefully
be encapsulated in a "struct File" or similar.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is pointless bike-shedding: instead of allocating the QTranslators
on the heap an assigning them to a variable at translation-unit scope,
we can simply generate them as static objects.
That makes
1) two fewer lines of code
2) the translator-resources are properly released when the application
closes.
Not that either of these points would make *any* difference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The prefs.locale.lang_locale field was overwritten without
free()ing the old value. Not that the function would be called
numerous times, but as a matter of principle...
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The uiLanguage() function was used for two purposes: to initialize
the language related preferences and to read the current language.
To make things more easy to follow, split this function in two:
one for initializing, one for getting the current language.
Moreover, don't return the current locale in an out-parameter
as there is already a function to do that [getLocale()].
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In uiLanguage() the preferences fields are initialized and there
is fixup for a MacOS indiosyncrasy. For some reason the uncorrected
value is written to the preferences. Let's store the corrected
value instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
uiLanguage() initializes the language fields from the preferences
values. It is unclear why this function is called in qPref::loadSync()
*before* the fields are loaded from disk. It can only initialize to
the default values anyway. After qPref::loadSync() uiLanguage()
is called again so that everything can be initialized with the
correct perferences values.
Remove the first call. If things break, let's fix them in a sensible
way.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This reverts commit 573a4a5e2d.
The commit broke setting the language in the desktop preferences:
Instead of setting the locale in the prefs struct, the locale
is set via qPrefLanguage. However, that saves the default language
(extracted from the system) to disk. Now when the language is
read from the preferences, we get that default value.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adding dives uses the number of the last dive to create a new
dive number. Ignore invalid dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The git parser loads into the global dive table, even if it
is called indirectly via parse_file(). However, parse_file()
may be given a different table. Fix this by extending the
git parser state.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing a dive on mobile we might have to create a new
dive site. That site is added to the global dive site table
in the undo command. However, the code in QMLManager created
the dive site with create_dive_site*() functions, which already
adds it to the table. The undo command then added the dive
site again leading to a hang of the application.
To solve this problem, create new alloc_dive_site*()
functions that do the same as create_dive_site*()
but do not add it to the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The pop_cstring() function is used by the git parser to
duplicate a quoted string. On error, it returns an empty
string literal. Since the caller expects a copied string
and takes ownership of that string, it will ultimately
be freed.
Concrete example: a log with erroneous cylinder data was opened
getting such an empty string literal as description. On closing or
syncing with the cloud, the dive is freed, leading to a free
of the string literal -> crash.
Return a copy of the empty string instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of relying on the std::vector staying unchanged and not freeing
its members, instead keep a copy of the object in our DCDeviceData class.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user tries to download from a device that he hasn't given the app
permission to read from, Android will pop up a dialogue asking for that
permission. With this after giving the permission we continue (well,
technically, restart) the download which is likely the expected behavior.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This finally allows us to download from not just the first device, but specifically
the device that the user picks.
Passing the object through a void pointer is not nice - but since this traverses
C code other solutions (like passing an index into the list) seemed even worse.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of creating a string with all the object information, simply pass
the actual object to the C++ code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now always create a list of usb devices that doesn't list a driver
for known devices, and adds multiple entries with each of the drivers
for devices that are unknown to us.
This removes some debugging output in the ..._open() function as well.
This could be combined with Christof's earlier commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For a small number of dive computers we can actually figure out the
real information which we can then later show to the user.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As discussed in issue #2657, there are now more fields about the usb
device information in android_usb_serial_device_descriptor.
Additionally, the user-facing string now makes more sense:
"vendor [<bus# as integer>:<dev# as integer>]"
Where vendor is as reported by android, but shortened to 16 characters.
Examples:
FTDI [1:2]
Silicon Labs [1:4]
Signed-off-by: Christof Arnosti <charno@charno.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit contains the serial_android_usb part of the changes proposed
in issue #2657.
What's implemented:
- A data structure that contains all the data that can be used to
describe an usb device (including user-facing string).
- A function to get a list of all attached usb devices (optionally with
selectable driver class).
- Changes in the serial_android_usb_open-function and in the Java part
to use the information about the usb device and optionally selected
driver when connecting.
This commit keeps compatibility with the current UI-Code in the case
that only one USB-Device is connected. If two devices are connected,
only the first one is tried.
There are still some small things to do:
- Change the user-facing string to something more descriptive.
- Parts which aren't uesd anymore when the UI-Part is implemented are
simply marked as obsolete (to keep compatibility for now).
But generally it seems to work.
[Dirk Hohndel: some white space / coding style adjustments]
Signed-off-by: Christof Arnosti <charno@charno.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the exact same case as the previous commit, just for the writing
side.
Once again, it's the subsurface rfcomm iostream code that can return
DC_STATUS_SUCCESS with a byte count of zero when something goes wrong
with the write.
And once again, our libdivecomputer iostream code didn't try to be
robust and protect itself from that case.
The fix is equivalent, although slightly simpler, since the write side
doesn't have the whole timeout issue.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We had two independent bugs here, both of which needed to fire for this
to cause a problem. This fixes both of them.
The first bug was that our rfcomm code would return DC_STATUS_SUCCESS
with a zero-sized read when a timeout happened, or when the rfcomm
socket had disconnected. That makes absolutely no sense. We should
return DC_STATUS_TIMEOUT on timeout, and DC_STATUS_IO if the socket has
disconnected without any data.
The fix to this is to make the whole rfcomm iostream read logic much
simpler: there's no need to loop at all for partial results, because the
libdivecomputer iostream side will do the loop for us (and handle
partial results much better: it knows if the target backend can handle
those partial results or not).
The second bug was in our libdivecomputer iostream read() function,
which reacted very badly to this bad return value. This updates our
libdivecomputer branch to one that is more careful about things.
Reported-by: linuxcrash <albin@mrty.ch>
Debugged-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The diveListNotifier.divesSelected() signal is used to inform the
models of a selection change. It sent the current dive as a second
parameter. This is redundant, because the only sender of the signal
sets current_dive just before sending the signal. Remove the
parameter, which appears to be an artifact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Grammar-nazi ran
git grep -l 'indexes' | xargs sed -i '' -e 's/indexes/indices/g'
to prevent future wincing when reading the source code.
Unfortunatly, Qt itself is infected as in
QModelIndexList QItemSelection::indexes() const
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Since I learned while trying to implement this that getting sub-second
resolution time in portable C99 is hard (especially for someone who is
used to the comfort of std::chrono and Howard Hinnants date library) the
timer-implemetation from libdivecomputer is now copied to the subsurface
source.
Signed-off-by: Christof Arnosti <charno@charno.ch>
Thanks to the new USB serial implementation also that complex special-casing
is no longer needed. This should do the right thing now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a C string (which the caller needs to free) with the executed commands
in this session.
The detour via the callback allows us to not make the corelib depend on the
commands, which is nice for tests, export-html, and smtk2ssrf.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the QML code we pass ids around. I had assumed that there already was a reverse
lookup function, but I wasn't able to find it. So I added it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the undo-command for importing dives also on mobile. This should make the
whole disconnect-model shenigans unnecessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The goal is to send the signal for the correct dives / divesites
and thus not having to reload the whole model.
Right now the mobile UI does not yet catch the diveSiteChanged signals.
[Dirk Hohndel: small fix to ensure that we trigger a save to storage]
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This finishes the spliting of the GPS fix application:
One function for collecting the fixes, one for application.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Not that this would make any noticeable difference, but out of
principle, let's use Qt's string-literal macro for string-literals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make the application of the GPS fixes in two runs: first
collect dives and fixes, then apply the fixes. This will
simplify turning the application of GPS fixes into an
undo-command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We know that we cannot support native USB, USB HID, IRDA, and USB
storage on Android.
On the flip side, don't try to force the long broken FTDI download.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the Android USB stack and subsequently the usb-serial-for-android
driver have problems with read-timeouts, the read-timeout is now
implemented in AndroidSerial.java. Also, DC_STATUS_TIMEOUT is returned
if there are less bytes returned than expected.
Different chipsets seem to behave differently with
usb-serial-for-android. On CP210x the read blocks until there is some
data here, but on FTDI the chip seems to return whatever is currently in
the buffer (so 0 bytes if the buffer is empty). This different behaviour
should be mitigated by the changes by this commit.
Signed-off-by: Christof Arnosti <charno@charno.ch>
Implement the libdivecomputer API in Java and create C/JNI translation
layer.
[Dirk Hohndel: whitespace harmonization - yes, some of this is Java,
this still makes it much easier to read for me;
also changed the FTDI conditional compilation to make
sure we can still use that for mobile-on-desktop if
necessary]
Signed-off-by: Christof Arnosti <charno@charno.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a quick hack to reduce the noise in the log file when chasing other
bugs. Maybe this should not be enabled on release builds, but right now I don't
think the harm that having this in would do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For reasons which I don't yet understand, when plotting a dive
whose first cylinder is not cylinder 0 and then plotting a dive
with only one cylinder, it can happen that for the latter
explicit_first_cylinder() returns an erroneous value.
This is due to the way in which we copy the dive to be plotted
to displayed_dive.
For now, make sure that no invalid cylinder is returned to avoid
crashes. This will have to be changed anyway, since this is very
fundamentally not thread-safe and inefficient.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The version_printed variable is used to print version information
only once. It was a global variable, but never used outside of
its function. Therefore, move it into the function and make it
static. Since this is a plain old datatype (POD), it makes no
no difference whatsoever whether the static variable is in block
scope or not. Indeed, it is initialized in the data segment). Well,
we are in C mode and therefore everything has to be POD by definition.
I tested this on gcc and clang.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement tag- and people-filtering in the mobile version of
DiveFilter. As opposed to the desktop version, this has no
different modes: it always searches "startswith" and "all of".
I.e. all of the search strings must match and a tag / person
is considered as matching if it starts with the search term.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function checked a dive for a search string. Its functionality
was replaced by a fulltext index.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to the desktop version, use the fulltext index in
DiveFilter. This code is not yet executed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function did not access any class members and was not used
outside the tranlation unit. Let's make it local (i.e. static)
to the translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There are now three filter modes:
1) Dive site
2) Fulltext
3) Normal
When doing a fulltext search, get the dives that match the
fulltext filter and then apply the other filters on that list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When loading dive data, populate the fulltext index. When clearing
dive data, free the fulltext index. When deleting a dive, remove it
from the fulltext index.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add code that indexes all words of a dive and provides searching
for words.
A query is represented by the FullTextQuery class, which can be
initialized by assigning a string to it. It is basically a list
of words.
The result of a search is stored in the FullTextResult class,
which is a list of dives.
The actual indexing and searching is implemented in the FullText
class. However, this class is not exported because the interface
is partially accessible to C. Notably, the reloading of the
fulltext index is done from the C core.
Currently, the indexing and searching is totally unoptimized.
In a ~4000 dives test-log searches typically took single-digit
ms times. There is ample room for optimization (e.g. when
searching for multiple words, chose the words with few dives
first and when down to a few dives, check them individually).
The words of each dive are tokenized and uppercased and
cached with the dive. A pointer to these words is stashed
in the dive structure.
For now, compile only on desktop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The FilterData struct has the enum StringMode, which describes how
strings are searched (substring, startswith, exact). To make it
more generally accessible, remove it from the class. Since it is
an "enum class", the values don't pollute the global namespace anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveFilter class defined the showDive() function to test
whether a dive should be filtered or not. This was used in
DiveTripModel to loop over all dives or all dives affected by
an editing action.
This restricts us in how we do filtering: We can't use indexes
that give us directly the result. To make the filtering more
flexible, move the actual loops that do the filtering to
the DiveFilter class.
The undo-commands likewise called directly the showDive()
function to check whether newly added dives are shown.
Use the new interface here as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Because of the multiple string confusion, we'd get the names wrong for
modechange events. If we then made other changes to the dive and saved
the end result back, they'd now be wrong in the git cloud storage too.
Fix it up manually by just noticing that there's a 'divemode' string on
the event line, which can only happen with modechange events.
Maybe we should report the fixup? This just silently fixes it (but only
for the git save format).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We had some fairly obscure rules for how strings were parsed, and it
actually caused bugs when the same line had multiple strings in it.
That normally doesn't happen, and the cases where it was _supposed_ to
happen had special cases for it (divecomputer ID lines, and tag lines).
But by mistake, we had introduced a case of that for the event line
handling in commit b9174332d ("Read and write divemode changes (xml and
git)"), and nobody realized that the divemode string addition meant that
"oops, now it's corrupting the event name". An event line could look
like this:
event 40:00 type=8 divemode="OC" name="modechange"
where we now had both that "OC" and "modechange" strings, and the code
to pick the name just picked the first string. So we'd end up
effectively mis-parsing the above line as
event 40:00 type=8 divemode="OC" name="OC"
which is obviously wrong.
The dive mode didn't really need to be a string in the first place
(there is nothing to quote, and no spaces in it), but hey, here we are.
We can't just magially fix the existing broken saves.
So make it more straightforward to handle strings in the git format line
parser. We still stash the different decoded strings together in one
special memory buffer, but now the parser helpers automatically untangle
it as they traverse the key value pairs.
This is still overly subtle code, and it doesn't fix the cases where
we've saved the wrong data back. That comes later.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we change the gps location of a dive that didn't have a dive site associated
before (which is the normal case when a dive was just downloaded from a dive
computer), a new dive site is created with that GPS fix and added to the dive.
We need to mark that dive as changed in order for the changes to be saved to
storage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently, we do substring search. Implement starts-with and
exact mode (for example when search for "Cave vs. Cavern" tags).
For each textual search criterion add a combo-box.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Corrected typo of the word celsius in three files:
core/import-csv.c
core/divefileter.h
mobile-widgets/qml/Settings.qml
These were spelled as celcius but corrected these to celsius.
The 'core files were just comments but the mobile-widgets file would be
'active' code.
Reported by: tormento <turment@gmail.com>
Signed-off-by: Jason Bramwell <jb2cool@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These just make no sense. Since the value is copied, it
has no meaning to the caller whether the function can
change the value (and vice versa for return types).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove two erroneous comments stating that a function-local
QSettings variable should not be static because it is initialized
too early. Scoped static variables are initialized when execution
first hits the statement.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The idea is that in portrait mode we can force the display to be single column (which
makes sure that the profile in dive display mode is nice and big).
This commit only implements the preference variable that we need for that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of transporting the global first and last dive date
in the dive summary, calculate it in an external function.
Since we already have time and date functions in qthelper.cpp
implement those functions there. Provide a stub in QMLInterface
so that QML can access these standalone functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some Wikipedia pages use special (non-ASCII) unicode symbols for
representing the " and ' separators. Before parsing, replace these
by the ASCII symbols to enable copy & paste from Wikipedia (and
other sources?).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As we do XSLT parsing for the CSV import, ampersand characters need to
be encoded with & for the parsing to succeed.
Fixes#2037
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
When starting / changing the dive-site filter, inform the map of
the changed dive site selection by calling
MapWidget::instance()->selectionChanged();
This fixes a bug, where on clicking dive sites in the dive site
tab the dive sites from the *previous* click were highlighted.
Perhaps the selectionChanged() call should be put into the
setSelected() call. But the data flow between the different
parts of the dive-site and map code are so convoluted that I
don't want to risk anything!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We tend to use lower-case filenames. Let's do it for these files
as well. Simple search & replace.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Windows had it's own direct socket implementation for rfcomm (ie legacy
BT), while all the other platforms used QtBluetooth.
This makes Windows do the same thing. Hopefully modern Qt libraries now
work well enough on the Windows platform for this to work, but I can't
test it.
We can make a test build that Windows people can try, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jef has changed the libdivecomputer iostream layer and extended it in
two different ways:
- iostram's now have a 'poll()' method, which does what the name
implies: waits for data to be available with a timeout.
- iostreams now have a 'ioctl()' method, which can be used to implement
miscellaneous operations. Right now the two ones that you can do are
"set latency" (this replaces the old 'set_latency()' method) and "get
BLE name" (this replaces our 'get_name()' method that was never part
of the upstream libdivecomputer interfaces)
Neither of these is all that complicated, and the transition is fairly
obvious.
HOWEVER.
I have absolutely no idea how to do 'poll()' on Windows sockets, and I
have no intention of figuring it out. We use a direct socket interface
to implement the (non-BLE) RFCOMM bluetooth serial protocol, and I'm not
sure why Windows is so special here. I suspect - but cannot test - that
we should just switch the Windows RFCOMM implementation over to the use
the same QtBluetooth code that we use on other platforms.
I assume that the Windows Bluetooth support was originally not
sufficiently good for that, but these days we depend on Qt doing BLE for
us even on Windows, so presumably FRCOMM works too.
That would be a nice cleanup, and would make 'poll()' work on RFCOMM
under Windows too. However, since I can't test it, I've not done that,
but instead just made the Windows RFCOMM 'poll()' method always return
success. That may or may not get the thing limping along.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simply replace it with QLatin1String. There is a tiny performance penalty,
but none of that code would care.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This replaces the C-code XML parsing with a Qt infrastructure.
QXmlStreamReader is used to parse the GPX file.
It also takes into account comments by @neolit123
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
This shouldn't be part of the desktop UI code; there's still the issue that we
really shouldn't hand code XML parsing, but I'll leave that for later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prefs.unit_system is set at the top, so no need to set it again.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prefs.unit = x needs to be after the setters are called, otherwise the setter
will not do anything, and result in an inconsistency between the values stored
on disk and in prefs.units.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove string version of unit_system, duration_units, length, pressure,
temperature, vertical_speed_time, and volume, including tests and make signals
strongly typed in C++
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Register enums to allow them to be used in signal handlers instead of int.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add CLOUD_STATUS enum to interface.
Add cloud_verifification_status variable to interface, and make
it strongly typed in QML.
using backend.cloud_verification_status = 1 will fail but
backend.cloud_verification_status = backend.CS_UNKNOWN is correct.
Added note to the original definitions of the enums that they have been
duplicated.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a header file that contains a duplicate of the enums,
that are needed in QML in one class.
the unit enums are added imidiatly, since they are needed
or will be neede shortly in Settings and DivePlannerSettings
This class will also contain Q_PROPERTY and signal/slot for
variables used in QML. This is done to allow e.g.
deco_mode qPrefUnits::planner_deco_mode()
void qPrefUnits::set_planner_deco_mode(deco_mode)
as strongly typed in C++
and
DECO_MODE planner_deco_mode()
void set_planner_deco_mode(DECO_MODE)
as strongly typed in QML
Remark: wrong assignments gives errors in QML
The advantage over using strings or the value directly is that
QML detects typos and flags them as errors/warnings.
It is important to note that the class may only contain
a) a function call to the implementation
b) a reference to a global variable e.g. prefs.
Added note to the original definitions of the enums that they
have been duplicated.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user may modify the salinity by selecting a water type from the combobox.
The new datum does not replace the existing salinity value but is stored in a
separate variable within the dive structure. If the dc-based salinity is
overwritten, there is an exclamation mark next to the modified salinity value
to indicate that the salinity has been overwritten. The dc-derived salinity can
always be recovered by selecting the "use dc" option in the combobox.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a checkbox in the Preferences: General screen that enables or disables
editing of the salinity data. This preference is saved with all the other
preferences.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit dbb504 tried to prevent an uninitialized dc pointer
from being dereferenced. But I screwed up the logic always
setting the event pointer to NULL. This fixes this error.
Reported-by: willemferguson@zoology.up.ac.za
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When using the string setters, the original signal should still be emitted.
Change to call original setter in string setter.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing between METRICS <-> IMPERIAL, all type signals are emitted.
This may cause double sending of some signals, but all signals will be emitted
at least once.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching between imperial/metric it is important to change the single
measurements as well (e.g. METER <-> FEET).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All unit functions have a string version and a normal version, except
unit_system.
Make a non string version of unit_system.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were several issues with these tests, including checking
the value argument against bool values even if the underlying
preference isn't bool.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use string literals to communicate with QML.
Instead of passing arounds enum/int value, it seems easier to pass string literals to QML and have that code respond to those
Signed-off-by: Jan Iversen <jani@apache.org>
Do not set prefs.locale_lang_locale directly, but do it
indirectly through qPrefLanguage::set_lang_locale(),
to ensure the file plist is consistent with prefs.
the difference (prefs. contra plist) cause surprises
when restarting mobile (and playing with language).
Signed-off-by: Jan Iversen <jani@apache.org>
This commit does some final cleaning up to the code, mostly deleting
white space and comments.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a tab for dive log - related preferences.
A suitable test programs is still required.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a preferences tab for dive download, allowing resetting the
buttons representing download connections in the Download panel.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the preference settings dealing with thumbnails (currently under
General preferences and Profile preferences) and put them in a newly-created
Media preference tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the "Show unused cylinders" checkbox (Profile tab) and the
"Set default cylinder" qTextEdit box (General tab) and put them in a
separate and new Equipment tab. This sounds like a simple task but,
as can be seen from the files changed, was actually a complex matter.
Adapt the existing test programs (General and TechDetails) for creating
a test program that tests parts of the Equipment tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
WARNING: multi directory commit, needed to secure it builds.
move the core/plannerShared.* to backend-shared.
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
WARNING: multi directory commit, needed to secure it builds.
move the core/exportfuncs.* to backend-shared.
update backend-shared/CMakeLists.txt to generate backend-shared lib
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
qPrefDiveplanner contains settings for ascent and descent in a neutral format.
diveplanner desktop uses a macro UNIT_FACTOR to convert between UI values and
qPref values.
In order not to dublicate these calculation (in C++ and QML) a set of shared
functions are made. The functions are identical to the calculations in diveplanner
desktop.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add a plannerShared class, whose purpose is to contain shared
functions between mobile and desktop
This class is the inner workings of the diveplanner not the UI
Signed-off-by: Jan Iversen <jan@casacondor.com>
LOG_STP is on longer providing the data needed, since a lot of the startup
is indirectly in QML, furthermore using the xcode project and running profiler
gives much more detailed information
Signed-off-by: Jan Iversen <jani@apache.org>
Do reply->readAll() before reply-deleteLater()
With UI deleteLater() seems to happen after the function exist,
but with QML it causes problems.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The uploadStatus signal can be used to inform the user about
the process e.g.
- preparing zip file
- starting actual upload
It is a suplement to uploadProgress, that only informs about
the network part.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Secure that the slots/signals in uploadDiveLogsDE, which are without
UI, can be used in DivelogsDeWebServices (to add the UI part).
Signed-off-by: Jan Iversen <jan@casacondor.com>
The difference between slot names and signal names was to insignificant
e.g. uploadFinish (signal) uploadFinished (slot).
Change slot names to slot_<name> should clear any confusion.
Signed-off-by: Jan Iversen <jan@casacondor.com>
prepareDives needs to be public, in order to be used in
subsurfacewebservices.
"friend" is another option, but that gives subsurfacewebservices
too much freedom.
Signed-off-by: Jan Iversen <jan@casacondor.com>
In order to replace DivelogsDeWebServices::prepare_dives_for_divelogs with
uploadDiveLogsDE::prepareDives, first step is to make the functions identical.
amount_selected is not maintained for mobile, add #ifdef SUBSURFACE_MOBILE
Add comment, to make code more readable
add white line to make code more readable
change to use variable ds (created a couple of lines earlier
Avoid "goto" by adding close code
Remove label and close code (it was only called in 1 place)
Signed-off-by: Jan Iversen <jan@casacondor.com>
use report_error directly, instead of making a QString first,
argument syntax are different (%s vs. %1)
Signed-off-by: Jan Iversen <jan@casacondor.com>
The implementation is based on class DivelogsDeWebServices in
desktop-widgets but without the UI entanglement
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add divelogsde_userid and divelogsde_password to
qPrefCloudStorage to be used in Export.qml
Extending qPrefCloudStorage is more logical than adding QSettings
(and securing the same behaviour) outside qPref.
Signed-off-by: Jan Iversen <jan@casacondor.com>
diveshareexport wants to show the HTML received
in a positive response, so signal cannot be
compatible with diveLogsDE
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add DiveShareExportDialog::do_upload() to
uploadDiveShare::do_upload(), while cleaning it from
UI.
Add signal connections as used in uploadDiveLogsDE
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add diveshare/uid and diveshare/private to qPrefCloudStorage
to be used in Export.qml as well as diveshareexportdialog
Extending qPrefCloudStorage is more logical than adding QSettings
(and securing the same behaviour) outside qPref.
Signed-off-by: Jan Iversen <jan@casacondor.com>
This is the framework that mobileExecutable needs, all
prepared to move functionality from desktop-widgets
(current implementation) into a shared version.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The old code called directly into the DiveListModel. Instead,
send a signal and hook into the signal from the model. This
will allow us to remove the DiveListModel::instance() function.
This, in turn, is a step towards supporting multiple models
at the same time. However, currently the model manually
sets the hidden_by_filter flag in the core and therefore
only one active model is supported at a time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, selecting a single dive or deselecting all dives was
quite awkward: One had to pass in a single-dive vector and the
dive itself (as current dive). Provide a convenience function
that selects a single dive or deselects all dives if null is
passed in.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Q_PROPERTY contains an internal ";", making clang produce a warning
when ending the line with a ;
Remove ; at the end of Q_PROPERTY lines.
Signed-off-by: Jan Iversen <jani@apache.org>
Currently, the caller is responsible for not reusing a freed
weightsystem / cylinder or resetting the description field to
null. This is very unfriendly. Set the description field to null,
because that allows us to call free_* repeatedly on the same
object. Use the new behavior to make the weightsystem model code
a bit cleaner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement the EditWeight undo command. Since there is common code
(storage of the old weight), this creates a common base class for
RemoveWeight and EditWeight. The model calls directly into the undo
command, which is somewhat unfortunate as it feels like a layering
violation. It's the easy thing to do for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of freeing internal data of the weightsystem structure,
call the free_weightsystem function (which has to be made extern
at first). This makes things more future-proof, should the
weightsystem struct ever be extended.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To make things more future-proof, introduce an empty_weightsystem
constant. Replace explicit aggragate initialization of empty
weightsystems by this constant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit more complicated than weight adding, because the
multiple-dive case is not well defined. If multiple dives are selected,
this implementation will search for weights that are identical to the
weight deleted in the currently shown dive. The position of the weight
in the list is ignored.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce an AddWeight undo command. This is modelled after the
numerous dive-edit undo commands. The redo and undo actions are
connected to the WeightModel via two new signals, weightAdded
and weightRemoved.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveFilter is not available in Mobile, so another solution
is needed.
Use "for_each_dive_site" to loop over dive sites instead.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The DiveListView has a function to select the first dive. Move
this to the core to be able to call it from all parts (not only
desktop) of the code.
Currently, this has a (small?) UI regression: when filtering dives
and no selected dive is visible anymore, the old code would select
the first dive in the list. The new code selects the newest dive,
which might not be the first if some sort-criterion is active.
To revert to the old behavior, it will be necessary to move the
sorting function likewise to the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The file command_private.cpp had functions concerning selections
only. To make these functions accessible from outside the undo
machinery, turn it into a part of the core-library. Currently,
only C++ functions are exported. We might think about also
exporting a C interface.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
desktop-widgets/divelogexportdialog.* contains both the desktop
dialog as well as the "real" export functions.
Create a class to be shared between desktop and mobile
Copy the export functions 1-1 from divelogexportdialog.* of course
changing class names.
saveProfile is highly dependent on the UI, so the implementaion will
be done in each UI directory (desktop-widgets, mobile-widgets).
Remark this commit just add the copied functions, in order to secure
nothing is broken.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add the export of environmental parameters in star widgets to .html format. The
dive rating is always shown both in the condensed as well as in the expanded
view. The other five environmental variables are only shown in the expanded
view. Only those star widgets with a rating are shown: if a star widget has not
been rated in the UI, then it is assumed unrated and is not indicated in the
expanded view.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Provide file I/O for those star widgets that are enabled. The values of the
widgets can be stored to and read from either xml or git.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Connect the UI to the underlying dive structure. Enable proper initialisation
and management of star widgets while Information tab is active. Enable undo for
the addtional star widgets.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a preference setting on the General Settings page. The setting is saved
with the other preferences.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As per request from users on scubaforum.com, this adds
the current gradient factor to the deco information of
the infobox. Up to now, this information was only
graphically represented in the pressure bar graph
and the heatmap. This gives a numerical value.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add flag to subsurface_mobile (only when compiling for desktop)
to allow using qml files from disk instead of resources.
This allows testing qml changes with just restarting subsurface_mobile.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The code seemed to do something really reasonable by picking one of the
supported OSTC versions - except that the one it picked didn't support
BT/BLE and therefore our logic of recognizing dive computers on iOS
failed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I was reminded to do this when a user in French speaking Switzerland reasonably
suggested that fr_FR would be a much better fallback than en_US in their
situation.
Fixes: #2388
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The way this was accessed via Qt's model semantics was horrible.
This gives arguably more readable code, since we don't have to
shoehorn things through QVariants.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split out the actual filtering from the MultiFilterSortModel.
Create a DiveFilter class that does the actual filtering.
Currently, mobile and desktop have their own version of this
class, though ultimately we may want to merge them.
The idea here is that the trip-model and undo-commands have
direct access to the filter-function and thus can take care
of keeping track of the number of shown dives, etc.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter-model was catching dives-added / dives-deleted signals
from the models to keep track of the number of shown dives.
To simplify the data flow, do this directly in the undo-command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We mark hidden/shown dives in the core but store the number
of shown dives in the MultiFilterSortModel. Move this datum
to the core for improved locality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
According to the man page, fopen and fclose return
the error number in the global variable errno.
Fixes CID 350115
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This fixes another thing Coverty found. I am not 100% sure
I understand the semantics of cylinder_t.manually_added
but looking at other instance I guess true is the correct
value for a cylinder from a csv file for a Poseidon
rebreather.
Fixes CID 350734
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Coverty found that in the export functions, we initialize
the planner deco state with NULL and then possibly later
access its content. This makes sure, we don't do that.
Let's see if this makes Coverty happy or I missed somehting
else.
Fixes CID 350736
Fixes CID 350735
Signed-off-by: Robert C. Helling <helling@atdotde.de>
It makes no sense to have a non-NULL current_dive once all dives
have been deleted. Therefore, clear current_dive implicitly in
clear_dive_file_data() and don't depend on the caller performing
this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In get_gas_used() the use was left uninitialized if there are neither
user- nor computer-supplied values. This gives random SACs in the UI.
Initialize to 0.
Fixes#2376.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The determination of minimum pressure in calculate_max_limits_new()
in profile.c was wrong for a long time. Since the loop went over all
cylinders (even unused ones), the minimum pressure was always zero.
Since we loop only over used cylinders, the minimum pressure was
initialized to the lowest starting pressure of any cylinder.
If there were no events with pressure change, the minimum pressure
stayed unchanged, resulting in a funky scaling.
Instead, let's initialize the minimum pressure to the lowest ending
pressure.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When parsing of a timestamp failed (shouldn't happen) set the
timestamp to zero. This should give less unpredictable results
and silence a compiler warning.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinderList() function collects all cylinder descriptions.
Instead of adding all cylinders, then sort, then removed duplicates,
keep a sorted list and only add non-existing elements. Find
existing elements by a binary search.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The tab was crashing if there were no cylinders because
1) per_cylinder_mean_depth() would access non-existing cylinders.
2) TabDiveInformation::updateProfile() would access a non-existing
mean.
Fix both of these crash conditions by checking whether the dive
actually has cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In getFormattedWeight() and getFormattedCylinder(), the indexes
were passed as unsigned ints. This makes no sense as the only
callers were using signed ints. Change the parameters to signed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As a convenience, return the cylinder from add_empty_cylinder()
to spare the caller from the nasty expression to fetch the
last cylinder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Most callers of this function accessed the newly generated cylinder
immediately after calling this function. Thus, for convenience,
return the added cylinder. This avoids a number of verbose expressions.
On the flip side, cylinder_start() now has to be cast to
function returning void in a the "nesting" function table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Thus, future callers will not have to include the monster dive.h
include if they just want to copy cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the loop body of copy_cylinder_types() into its own function.
When using variable sized arrays, this loop will have to treat two
cases (overwrite cylinder and add new cylinder), so that makes things
more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
merge_cylinders() used three bitmaps to identify cylinders used in
the first and second dive and matched cylinders. Even though nobody
will use more than 32 (or 64!) cylinders, replace these with
dynamically allocated bool-arrays for consistency with the rest
of the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When calculating per-cylinder mean depths, bitfields were used to
keep track of "used" and "known" cylinders. Even though no sane
person will use more than 32 cylinders, turn this into dynamically
allocated arrays of bool for consistency with the rest of the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To calculate sac rates, an array of used gases for every point on the
profile was used. This was implemented using unsigned int bitfields.
While nobody sane will ever use 32 or even 64 cylinders, for consistency
with the rest of the code, also change this to use dynamically
allocated arrays.
But allocate only once per shown profile, not once per sample.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All accesses to the pressure data were converted to use functions.
Therefore it is now rather trivial to dynamically allocate the
pressure array and just change the functions.
The only thing to take care of is the idiosyncratic memory
management. Make sure to free and copy the buffer in the
appropriate places.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The save_profiles_buffer() function was accessing the pressure
data directly. Instead, use the already existing funcions to
make transition to dynamically allocated pressure data more
seamless.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The pressure data was directly accessed in fill_missing_tank_pressures().
Use the already existing functions so that the structures can be adapted
easily.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only apparent reason that this was a macro is that it automatically
increased the "index" and "entry" counts. But incrementing these explicitly
seems reasonable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Continue with replacing pointers to struct plot_data entries
by indexes. Thus the pressure data can be kept in its own
array and can by dynamically sized.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The goal here is to make it possible to detach the pressure related
data from the plot_info structure. Thus, the pressure related data
can be allocated independently depending on the number of cylinders
per dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dynamically allocate cylinder arrays in C code. This is a tiny
step in removing the MAX_CYLINDERS limitation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
get_gas_used() returns the volume of used gases. Currently,
an array with MAX_CYLINDERS is passed in. If we want to make the
number of cylinders dynamic, the function must use an arbitrarilly
sized array.
Therefore, return a dynamically allocated array and free it
in the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Memory is cheap these days. Still, this was wasteful. On a 64 bit machine we
went from 1620 to 1592 bytes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When displaying segment or stop times in the planner notes, we always
round to the next full minute. This can mean for example that we
round down more often than rounding up with the result that the sum
of the segment times does not match the total runtime and can for example
lead to stops that are shown with 0min duration.
With this patch, we increase the reference time of the last display only
by the duration time actually shown. This way, the rounding errors don't
accumulate but having rounded down previously makes rounding up the next
time more propable.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When computing the best mix for a target depth, for helium, one
can either require that the partial pressure of N2 is the same
as at the target depth or the partial pressure of N2 plus O2.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We should call this function with two well defined dive_or_trip structures
which means that exactly one of the two values is set in each argument. But
in order to not have bugs elsewhere leed to crashes here, be more tolerant
of malformed argumnts.
Fixes CID 350100
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should never happen based on the logic in the callers, but just
to be on the safe side.
Should fix CID 350128
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The native buffer of a membuffer is not NUL-terminated, so when you want
to detach it and use it as a C string, you had to first do
'mb_cstring()' that adds the proper termination/
This was all documented in the header files, and all but two users did
it correctly.
But there were those two users, and the exported interface was
unnecessarily hard to use. We do want the "just detach the raw buffer"
internally in the membuffer code, but let's not make the exported
interface be that hard to use.
So this switches the exported interface to be 'detach_cstring()', which
does that 'mb_cstring()' for you, and avoids the possibility that you'd
use a non-terminated memory buffer as a C string.
The old 'detach_buffer()' is now purely the internal membuffer
implementation, and not used by others.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This seems excessively unlikely to actually fail. SEEK_END works, but SEEK_SET
fails? Oh well. Belts and suspenders.
Found by Coverity. Fixes CID 45039
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents a resource leak.
Found by Coverity. Fixes CID 350080
The commit also includes some tiny whitespace/empty line fixes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I missed one file fixing this earlier.
Since we never did anything with the error string, why even ask for it.
And this way we don't have to deal with the memory returned, either.
Found by Coverity. Fixes CID 350082
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we never did anything with the error string, why even ask for it.
And this way we don't have to deal with the memory returned, either.
Found by Coverity. Fixes CIDs 350124, 350113, 350106, 350099, 350091
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Even if there is a valid trip, we should not add a structure that isn't
a dive to it.
Found by Coverity. Fixes CID #350073
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Free resources allocated by alloc_dive() with free_dive().
Don't allocate and re-allocate a fixed two byte buffer on the heap.
Indirectly this fixes CID 216616
Suggested-by; Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this is debatably correct, free will happily accept (and ignore
the NULL pointer), so let's just always call it and make Coverity happy.
Fixes CID 45163
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The divesEdited signal sends the changed field as a parameter.
Since some undo-commands change multiple fields, this led to
numerous signals for a single command. This in turn would lead
to multiple profile-reloads and statistic recalculations.
Therefore, turn the enum into a bitfield. For simplicity,
provide a constructor that takes classical flags and turns
them into the bitfield. This is necessary because C-style
named initialization is only supported on C++20 onward!
Is this somewhat overengineered? Yes, maybe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo system sets updates individual dive fields on
redo respectively undo. Make salinity such a field, since
it is changed on replanning a dive.
To do this, break out the "update salinity" functionality
into its own function, add an entry to the DiveField enum
and add the corresponding switch-case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive-computer freeing code was local to dive.c. Implementing
the replan undo-command will need that functionality. Therefore,
export it as a global function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
At least in one of the logs we saw there seemed to be trailing spaces.
It should be enough for the BT name to start with "Mares Genius" in
order to be recognized.
Suggested-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't have the "show all dive computers" logic on mobile, so we need
something like this.
Possibly we should use the libdivecomputer matching code if it exists,
but that's a much bigger change, let's do this incremental one for now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We'll use them from the model in order to avoid creating this many
DiveObjectHelpers when showing a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is disabled by default - but when compiled in it makes it a lot
easier to pinpoint why we are creating so many DiveObjectHelpers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old server certificates where not recognized on some older platform,
so we hardcoded the hex digest of the valid certificate and ignored the
error.
Those certificates have been replaced last week, so there is no point to
this hack anymore - also, we should always show the SSL error, not just
in verbose mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit df4fbf7699 ("Android: force different font on OnePlus devices")
inadvertantly added this hunk - let's undo it again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The test if we have to create gas switches wasn't yet aware
of the bailout option.
Reported-by: Dennis Arreborg <dennis@arreborg.eu>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The DiveImportedModel and DownloadThread used the same table
of dives and dive sites. This made it very hard to keep the
model consistent: Every modification of the download thread
would make the model inconsistent and could lead to memory
corruption owing to dangling pointers.
Therefore, keep a copy in the model. When updating the model,
use move-semantics, i.e. move the data and reset the tables
of the thread to zero elements.
Since the DiveImportedModel and the DownloadThread are very
tightly integrated, remove the accessor-functions of the
dive and dive-site tables. They fulfilled no purpose
whatsoever as they gave the same access-rights as a public
field.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Even though the returned dive is not const, the table is not
changed, as it only contains pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To allow efficient moving of downloaded dives from the download
thread to the model, implement a general move function that
moves table data. Instantiate that function for the dive and
dive_site tables.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way we handle singletons in QML, QML insists on allocating the
objects. This leads to a very idiosyncratic way of handling
singletons: The global instance pointer is set in the constructor.
Unify all these by implementing a "SillySingleton" template. All
of the weird singleton-classes can derive from this template and
don't have to bother with reimplementing the instance() function
with all the safety-checks, etc.
This serves firstly as documentation but also improves debugging
as we will now see wanted and unwanted creation and destruction
of these weird singletons.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To make it easier to pass around trips through QML, give each trip
a unique id. The id is generated in alloc_trip() and uses the same
function to generate unique dive ids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When exporting dive sites, the dive sites to be selected were collected
in the C-core. But that doesn't have access to the selected dive sites
if in dive site mode. Therefore, collect the dive sites in C++ and
pass down to the core. Use a std::vector to avoid memory management
woes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
is_dive_site_used() had a "selected" parameter. If true it would
return whether the given dive site had a selected dive. Turns
out all callers had this parameter set to true. Therefore, replace
by a simplified function without the "selected" parameter and
give the function an appropriate name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is working around a Qt Bug https://bugreports.qt.io/browse/QTBUG-69494
which prevents correct rendering of the OnePlus fonts.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The cylindersObject list was only used by grantlee but not by
the mobile code. Since it is quite heavy, split it out and thus
don't generate it for every dive on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of handing a reference-to-dive to QML, prerender all the needed
properties and store them as values in DiveObjectHelper. Exception:
- date(): generated from timestamp
- time(): generated from timestamp
- cylinderList(): does not depend on dive anyway and should be made
static.
This hopefully avoids the random mobile crashes that we are seeing.
Clearly, this code needs to be optimized, but it is a start.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These were temporary functions as long as DiveObjectHelpers were
used to access dives. All users now access the core directly and
therefore don't have to test DiveObjectHelpers for validity.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't provide access to the raw dive in DiveObjectHelper. All users
now access the core directly. This is a step in making DiveObjectHelper
value-based.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of keeping track of a list of DiveObjectHelpers, generate
them on-the-fly in DiveListModel. Thus, there is less danger of
model and core getting out of sync. On the flip-side, now the
DiveListModel and the DiveListSortModel might get out of sync.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveObjectHelper is a tiny wrapper around dive * to allow access
to dive data from QML and grantlee. It doesn't have to be a
full-fledged QObject with support for signals, etc. Therefore,
turn it into a Q_GADGET based object. This allows us passing the
object around as object, not as pointer to DiveObjectHelper.
This makes memory-management distinctly easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We don't want to generate a DiveObjectHelper numerous times for
every item in the dive list. Therefore, return this datum directly
from the model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The canonical way of displaying lists in Qt is via models.
Thus, return the tripId directly from the DiveListModel instead
of going indirectly via a DiveObjectHelper. In the future, this
will allow us to make the DiveObjectHelper value-based, as it
is not generated numerous times for every list item.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These properties are not needed anymore, because the full text search
was decoupled from the DiveObjectHelper.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) The full text search was looping over the DiveListModel when
it could simply loop over the core model. Do that instead.
2) Don't generate a DiveObjectHelper to do a full text search.
Currently this is harmless as the DiveObjectHelper is only
a disguised "dive *". But from a conceptual point of view,
it represents the full representation of a dive and we don't
want to generate that in a tight loop.
This will help in
1) Making the DiveObjectHelper a non-reference object.
2) Moving fulltext search to the core and thus making it available
to desktop and more performant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the previous commit, we just continued downloading dives when
download errors happened, but that also makes problems a lot easier to
miss because now they are possibly just transient reports in the
progress bar that get overwritten by the next dive being downloaded.
So this turns a number of these errors from using 'dev_info()' to use a
new 'download_error()' reporting model, which then uses the generic
subsurface error reporting functionality that is sticky and can handle
multiple errors.
It also adds a few 'dev_info()' calls for actual informational messages
about the state of downloading, although the new ones will probably
mainly end up happening before the progress bar is actually shown. But
it might improve on some of the progress messages.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Charbonnier reported a problem downloading the dives from his
OSTC2, and Jef debugged the libdivecomputer log and says:
"Your ostc has 75 dives, but subsurface downloaded only one, and then
stopped the download. That's because that first dive appears to be
corrupt and fails to parse:
ERROR: Buffer overflow detected! [in /win/subsurface/libdivecomputer/src/hw_ostc_parser.c:981 (hw_ostc_parser_samples_foreach)]
Subsurface (incorrectly) considers that a fatal error and stops the
entire download. From a user point of view, it would be much better to
ignore the problematic dive, and continue downloading the remaining"
Subsurface used to just stop downloading if there were parsing errors,
but Jef further says:
"How parser errors are handled is up to the application. Aborting the
download is probably the worst option here. If a dive fails to parse
(because the dive data is corrupt, the parser contains a bug, etc),
that does not necessary mean the remaining dives can't be downloaded"
so let's change the logic to just continue downloading, and hope other
dives work better.
We might want to do better error reporting, right now the errors tend to
just cause "dev_info()" reports, which just set the progress bar text.
So you'll see it in the progress bar as it happens, but it won't get
really ever noted as an error, and it's easy to miss.
But that error reporting is a separate issue, and this just does the
"continue to the next dive" part.
Reported-by: Eric Charbonnier <eric.charbonnier69@gmail.com>
Suggested-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This balances the tags to a equal amount of start and end tags in the
planner notes html.
This also breaks it up with new-lines, so its a bit easier on the eyes,
and gives a validator the chance to point out on which line a error is.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
The output it spits out can be copy-pasted into a html validator like:
https://validator.w3.org/nu/#textarea
Signed-off-by: Anton Lundin <glance@acc.umu.se>
When gas switching only on stops is selected, the notes
showed an extra line at the not realized stop depth. This
eliminates it. It also makes sure there are no 0 second
spurious entries. And gas switching takes more than zero
time (otherwise we would have to print a line of zero
duration for at the gas switch depth).
Reported-by: tormento <turment@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
That was used to store the disclaimer of the last plan. The
functionality was disfunctional for a long time, therefore
remove the variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The setting of the disclaimer variable was removed inadvertently
some time ago, which removed the disclaimer from the printed plan.
Instead, introduce a function that returns the disclaimer with
the current deco mode. Use that function to generate the dive
notes and for printing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There used to be code to remove the old planner notes when replanning
a dive. It used a global variable and seemed rather brittle. Moreover,
the place that set the global variable was inadvertently removed.
Therefore has been effectively dead code.
Reimplement the functionality, but be more robust by considering
that the deco-type may have changed: Split the translated disclaimer
string in two parts, before and after the "%s" place-holder.
Search for these two parts. Remove the disclaimer and everything
after the disclaimer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replaces some enums with names that do not clash with windows #defines.
Specifically:
ERROR -> ERRORED, PASCAL->PASCALS, IGNORE->IGNORED,FLOAT->FLOATVAL
Signed-off-by: Paul Buxton <paulbuxton.mail@googlemail.com>
The create_plot_info_new() function releases old plot data. This
can only work if the plot_info structure was initialized previously.
The ProfileWidget2 did that by a memset, but other parts of the code
did not.
Therefore, introduce a init_plot_info() function and call that when
generating a plot_info struct. Constructors would make this so much
easier - but since this is called from C, we can't use them.
Fixes#2251
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I got confirmation from Tiago Thedim Dias that my libdivecomputer patch
makes BLE downloading work from the i200c, and already pushed out the
libdivecomputer changes earlier. This updates the subproject in
subsurface to have those changes.
This also adds the bluetooth name patterns for the i300c and a few other
Aqualung dive computers we hadn't added yet. That should make them show
up in the bleutooth device list even without having to check the "Show
all bluetooth devices" check-box.
Tiago claims he didn't need that, and I wonder if we have some overly
permissive match somewhere, but it's the right thing to do regardless.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of generating cylinder data in the form of
CylinderObjectHelper objects for every DiveObjectHelper,
generate it only if needed. DiveObjectHelper is used extensively
in the mobile interface, which doesn't use the cylinder data.
Let's not generate unnecessary CylinderObjectHelpers in this
case!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
CylinderObjectHelper is used for structured formatting of cylinder
values in grantlee types. Instead of keeping a reference to a
cylinder, turn it into a value type containing the formatted strings.
This should be distinctly safer, as we don't risk having stale
references flying around. Moreover, we don't have to use pointers
but can use containers containing plain CylinderObjectHelper. Thus,
no explicit memory management is needed, making the code distinctly
easier to understand.
Sadly, currently grantlee does not support Q_GADGET based Q_PROPERTY.
Therefore a GRANTLEE_*_LOOKUP block has to be added. This can be
removed in due course, as a patch to remedy this issue is in current
grantlee master.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We used a table lookup for CNS equivalent times. Turns
out the log of this table falls pretty much on a straight
line for po2 <= 1.5bar. We now fit this tabel two two
lines, one for <= 1.5 bar and one above. This four
parameter fit has half the sum of errors squared
than the five parameter fit using a fourth order
polynomial.
Fitting the log has the advantage that this never
crosses 0, which would have the bad effect of
resulting in negative CNS values as we divide
by the table value.
We don't adopt a maximum pO2 cut-off for the CNS calculation
but rather live with the large values that the interpolation
formula produces when extrapolating.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
It turns out that the dive site saving was subtly but horribly buggy.
To save the value of the dive site, it did
show_utf8_blanked(b, t->value, " value='", "'/>\n", 1, anonymize);
which looks sane on the face of it, but the problem is that it puts the
final closing xml marker in the 'append this at the end' case.
That means that if the value is empty, the value won't be saved, but
neither will the closing tag. Resulting in an xml line that looks like
this:
<geo cat='3' origin='0' <geo cat='5' origin='0' value='Other name'/>
where the first geo tag was saved without the ending marker.
That then makes all the xml nesting entirely wrong, and the whole file
fails to save.
Now, the code around it does check that 't->value' is not NULL, but it
doesn't check for a value that is empty or all spaces (which also will
make 'show_utf8()' just skip it.
Fix it by saving the end marker separately:
show_utf8_blanked(b, t->value, " value='", "'", 1, anonymize);
put_format(b, "/>\n");
so that the xml is valid even if the goe marker value wasn'r.
Reported-by: Bob Barker <barkerb1965@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It needs a newer version of libdivecomputer to actually download, but
early very experimental code exists in the Subsurface-NG branch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We don't support null-dives in DiveObjectHelper. Defaulting the
dive parameter to NULL seems to send the wrong message.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When removing the max-weightsystem restriction, the semantics of
the DiveObjectHelper::singleWeightSystem() function changed:
it now returned false for "no weightsystem". Change it back,
to 0 or 1 weightsystems, because the mobile frontend uses this
to check whether it can edit dive systems.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I'm not sure about this one, as we test name at the start of the
function and event->name shouldn't be NULL, but hey, we have the safe
compare function, so let's use it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Header files should compile regardless of order of inclusion.
Since libdivecomputer.h uses FILE unconditional include of
stdio.h is the correct thing to do.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Enough gas was checking the currently displayed dive instead of the
dive to be planned. Not good in a multi-threaded context. Pass the
actual dive instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Pass the dive to be planned to track_ascent_gas and don't use
the displayed_dive. For convenience, pass the cylinder-id, since
the function can now access the cylinder of the dive by itself.
This makes the callers less verbose.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function comment talks about overwriting displayed_dive, when
in reality the function overwrites a passed in dive.
Also fix a debug-call which dumped the displayed_dive, not the
actual dive to stdout.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The fill_default_cylinder() function calculated the MOD based
on the currently displayed dive. This does not seem to make sense:
- When importing dives, why would we care about the altitude and
salinity of the currently displayed dive, possibly from a different
trip.
- The planner is supposed to be thread-safe and should not touch
global variables.
Of course this means that the importing-functions have to fill
out altitude and salinity before creating the default cylinder,
but this is their problem. For a freshly created dive they will
get the default values, which still seems less random than the
values from the displayed dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing the global displayed_dive to
calc_crushing_pressure(), use the dive the planner is working on.
A small step in making the planner thread-safe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parser had global state in the form of a linear regression
and the "plot_depth" variable. Collect that in the deco_state struct and
pass it down the call-chain. Move out the code to update the
regression data to not bother other callers of tissue_tolerance_calc().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
A number of architecture-dependent functions were declared in
dive.h. Move them to file.h so that not all file-manipulating
translation units have to include dive.h. This is a small step
in avoiding mass-recompilation on every change to dive.h
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace a macro calculating a degree-three polynomial by an
inline function.
Moreover, calculate the powers 1, 2 and 3 of the pressure inside
the function. The compiler will be smart enough to optimize this
to the same code. The only important thing is to write "x*x*x*coeff"
instead of "coeff*x*x*x". The compiler can't optimize the latter
because ... wonderful floating point semantics.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The planner can produce negative cylinder pressures when
more gas is used than available. Let's color the pressure
graph in a highly visible color to alert the user of the
fact that current gas planning is insufficient.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The curve fitting for our gas compressibility was only done in the sane
range of 0-500 bar, which is what a scuba cylinder can reasonably be
expected to perhaps have.
But the planner ends up happily using negative cylinder pressures when
you run out of gas, and then the compressibility gives nonsensical
results.
That's clearly a planner bug, but the nonsensical gas compressibility
values made it harder to see what could be wrong.
So we just clamp the inpot range to the range we have verified against
experimental data. If you try to get compressibility for negative
pressures, you get the compressibility for an ideal and imaginary gas.
And if you try to get compressibility for pressures over 500 bar, we'll
just assume that it's 500 bar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For better encapsulation, use clear_git_id() in clear_dive_file_data()
instead of setting saved_git_id directly.
Thus, memory management of the saved_git_id value is encapsulated
and can be modified more easily.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The git parser was using a number of global static variables. Remove
them by introducing a parser state, which is passed down to the
call hierarchy.
Advantages:
1) Removes global variables and makes the parser (mostly) reentrant.
2) More flexible - e.g. when parsing samples, the parser can now
access the dive to check if the cylinder number is valid.
3) Less weak typing through "void *".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function get_divemode() and git_tree_entry_blob() were not used
outside of load-git.c. Make them of static linkage.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
copy_cylinders() copied the cylinders of one dive onto another dive
and then reset to the original gas values. Presumably, when copy and
pasting cylinders from one dive to another, only the types should
be copied, not the gases.
Moreover, the function could either copy all or only the used cylinders.
Firstly, the code was bogus: when restoring the pressures the indices
were mixed up: the old indices were used. Thus, when there where
uncopied cylinders, not all pressure values were restored.
Secondly, it is not clear that all callers actually want to restore
the pressure data. It rather appears the two (out of three) callers
actually just want to copy the cylinders.
Therefore, split the function in
1) copy_cylinders(): copy the cylinders with pressure data
2) copy_cylinder_types(): copy only the cylinder information
Since there is only one caller of copy_cylinder_types(), the "used_only"
argument can be removed. Since all cylinders are copied there is
no point in storing the pressure data. Don't overwrite it in
the first place.
The resulting two functions should be distinctly easier to understand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parsers / downloaders parse into a separate table and do
not directly change the divelist. Therefore, they shouldn't
call mark_divelist_changed().
Likewise split_dive_at() doesn't modify the dive list and
therefore shouldn't call this function.
Calling the function has the unwanted side-effect that undoing
the change will not clear the *-symbol in the title of the
main window.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was used to count the number of weightsystems
used in a dive. Since the weightsysems are now collected
in a dynamic table it became unused. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the fixed-size weightsystem table by a dynamically
relocated table. Reuse the table-macros used in other parts
of the code.
The table stores weightsystem entries, not pointers to
weightsystems. Thus, ownership of the description string is
taken when adding a weightsystem. An extra function adds
a cloned weightsystem at the end of the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will be used later when joining and editing dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sadly, this doesn't give any type safety. But at least it documents
the function arguments.
Make the last item in the enum as a number-of-pressure-entries
sentinel. Use that to size the pressure-values array.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of assigning the the lvalue of the SENSOR_PRESSURE
macro, introduce a general function to set pressure values.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The comment to populate_pressure_information() was mentioning
gas pressures that didn't exist. Remove these parts.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the INTERPOLATED_PRESSURE and SENSOR_PRESSURE macros by
inline functions. Generate a common inline function that reads
a pressure value for a dynamic sensor.
Not all SENSOR_PRESSURE macros can be replaced, because the
macro is also used to set the value and C sadly doesn't know
the concept of "return reference from a function".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is absolutely no reason to use a macro here.
The only argument that can be made is consistency with
the other pressure-macros, but those too are questionable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DILUENT_PRESSURE and INTERPOLATED_DILUENT_PRESSURE do not exist
anymore. No point in trying to output them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Another tiny step in making dive.h smaller: move function
declarations to deco.h if these functions are defined in deco.c
and don't directly concern dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The string_to_*() functions were declared in dive.h and qthelper.h.
Moreover in one file they were declared with C in the other with
C++ linkage. This only works because qthelper.h includes dive.h
first.
Fix this anomaly by declaring the functions only in qthelper.h,
but moving them from the C++ to the C part.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since this function doesn't act on a dive and is only related
to cylinders, move it to equipment.c and equipment.h.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
While testing the cylinder type saving fix, I noticed that the RBT
saving was broken. Instead of saving RBT whenever it changed, we'd save
it when it was non-zero. Which doesn't match the git save format, and
also doesn't match what we do when loading an xml file (where we default
to the previous RBT value, and a sample RBT will modify it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steve Williams reported a crash when saving a previously loaded dive as
xml, and gave a gdb backtrace.
It turns out that if we can't parse the cylinder use type (OC, diluent,
oxygen, unused) we initialize the cylinder use to an invalid type, and
then when we save it, we mess up.
Fix it up by doing proper limit checking before accessing the
"cylinderuse_text[]" array when saving.
Reported-by: Steve <stevewilliams@internode.on.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the error messages shown when failing to start ffmpeg, instruct
the user to set the correct executable in the preferences.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the git parser happily trashes memory if a git repository
contains too many weightsystems or cylinders. This should only happen
in testing, but nevertheless try to handle it gracefully and ignore
excess cylinders / weightsystems.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All callers of create_plot_info_new() called calculate_max_limits_new()
a line before. Thus, simply call the latter in the former.
This allows us to automatically free the plot data in create_plot_info_new().
The old code overwrote the corresponding field with NULL.
As a side-effect, this removes a bogus static variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a global variable last_pi_entry_new, which stored the
recently allocated plot data. This was freed when new plot data
was generated.
A very scary proposition: You can never have two plot datas at
the same time! But exactly that happens when you export for
example subtitles.
The only reason why this didn't lead to very crazy behavior
is that at least on my Linux machine, the calloc() call would
just return the previously freed memory.
Fix this mess by removing the global variable and freeing the
data in the callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Bailing out does not happen instantly. Rather wait for
the minimum stop switch duration before ascending.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In "core/save-html.h", the "core/dive.h" header was included in the
extern "C" block. This is invalid, because "core/dive.h" included
from C++ code contains Qt macros that expand to C++ templates. These
in turn must not have extern "C" linkage, since a plain C-linker
cannot handle such things.
The only reason this worked is that in all cases "core/save-html.h"
was included after "core/dive.h". The include of the latter in the
former had therefore not effect.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When checking for trip-overlap on import, only really overlapping trips
have been considered, i.e. when dives had overlapping times.
Instead use the TRIP_THRESHOLD so that on download dives are added to
the same trip if in a two-days time frame.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Reported-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For historic reasons, there where three distinct signals concerning
dive-selection from the undo-machinery:
1) divesSelected: sent newly selected dives
2) currentDiveChanged: sent if the current dive changed
3) selectionChanged: sent at the end of a command if either the selection
or the current dive changed
Since now the undo-commands do a full reset of the selection, merge these
three signals into a single signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some commands tried to retain the current selection on undo/redo,
others set the selection to the modified dives.
The latter was introduced because it was easier in some cases, but
it is probably more user-friendly because the user gets feedback
on the change.
Therefore, unify to always select the affected dives on undo()/redo().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the default view is batched by trips, signals were sent trip-wise.
This seemed like a good idea at first, but when more and more parts used
these signals, it became a burden. Therefore push the batching to the
part of the code where it is needed: the trip view.
The divesAdded and divesDeleted are not yet converted, because these
are combined with trip addition/deletion. This should also be detangled,
but not now.
Since the dive-lists were sorted in the processByTrip function, the
dive-list model now does its own sorting. This will have to be
audited.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In signals dives were sorted by date. This criterion is not be unique.
Therefore sort by the dive_less_than() function of the core to avoid
any inconsistencies between the Qt-models and the core data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The last direct user of the used parameter was removed in
16276faa45, the last actual user in
e2bbd0ceec.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was reimplementing functionality that was already there.
Simply call the already existing function.
Thus, we don't have to export the grow_dive_table function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cns_table was only used in divelist.c. Make it of static
linkage accordingly.
The cns_table_headers enum is likewise only used in divelist.c.
Therefore move it from the header to the .c file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function declarations of regressiona(), regressionb() and
reset_regression() were given in an independent translation unit.
Move them into the proper header file. To ensure consistent function
signatures is the whole point of header files, after all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The lookup tables decostoplevels_metric and decostoplevels_imperial
in planner.c were not used outside the translation unit. Make them
static.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
gaspressure.h had definitions of non-exported structs, but did
not declare the only function exported by gaspressure.c.
Therefore, move the struct definitions into gaspressure.c and
the declarations of the populate_pressure_information() function
from profile.c to gaspressures.h.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
But only functions that operate only on gases. Functions concerning
cylinders or dives remain in dive.c or are moved to equipment.c
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
gas_density() was declared extern in the header and defined inline
in the translation unit. I didn't even realize that this oxymoron
is valid. Remove inline and an Java-style function definition.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is an equipment.c file, but no corresponding header. Move the
corresponding functions into a newly created header. This does not
improve compile time since, at least for now, equipment.h is included
in dive.h. But it makes things more consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The comment said "Clear everything but the first element" but
actually the macro freed the whole list including the first element.
For dive computers it was explicitly called on the second element.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make dive.h a bit slimmer. It's only a drop in the bucket - but at
least when modifying tag functions not the *whole* application is
rebuilt anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Headers should not have to be included in a certain order.
Therefore include stdarg.h and stdio.h in membuffer.h, since
the latter uses FILE and va_list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is a function for copying tag-lists, use that instead of the
raw STRUCTURED_LIST_COPY macro-invocation. This will help in moving
tag functions into their own translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was probably used for debugging but has no callers anymore.
Let's remove it. If needed, it can be trivially readded.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When a different field is edited, hide any old multi-dive-edit
warning message. The reason is that we might want to add an "undo"
button to the message. But this will undo the wrong command if
we don't hide the message.
Sadly, this means that we can't use animated show / hide, because
an animatedHide() followed immediately by an animatedShow() does
not necessarily show the message. In other words, and animatedShow()
does not interupt a started animatedHide()!?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add display of the difference between pO2 in rebreather loop and the
equivalent OC pO2: this is the oxygen drop over the mouthpiece for
SCR dives. Obviously this is only displayed for SCR dives.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Note that we don't really have libdivecomputer support for it yet, only
newly added model numbers etc. But the name detection should make it
easier for people to at least download a memory dump.
In addition to the libdivecomputer model number updates, this also has a
merge of Jef's upstram libdivecomputer changes.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, count_divecomputers only works on the current_dive.
Instead, let it take a pointer to an arbitrary dive. This is
in preparation for being smarter in the undo code concerning
which dive computer to show on deletion.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function clones a dive and clear out the old dive. This
corresponds to move semantics. Name the function accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of the elegant solution that just modifies the dive,
keep two copies and add either the old or the new copy. This
is primitive, but it trivially keeps the dives in the right order.
The order might change on renumbering the dive computers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When splitting out dive computers, the dives were sorted in
an arbitrary way (according to an internal id), since all
data are identical.
Therefore, consider the dive-computer model names when sorting
dives. Equal dives are now sorted alphabetically by model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The units.h file has two functions to convert atm pressure to mbar
and also to convert mbar to atm pressure. Implement these two
functions in the planner.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
This is just a trivial update to recognize the BT name, and a
libdivecomputer submodule update to get the updates to libdivecomputer
to recognize the new USB IDs etc.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Information tab shows the atmospheric pressure. Make this value editable
and also ensure that changes to it are undo-able.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
The application state was encoded in a QByteArray. Thus, there was
no compile-time checking. Typos would lead to silent failures.
Turn the application state into an enum. Use the enum-class construct,
so that the values don't polute the global namespace. Moreover,
this makes them strongly typed, i.e. they don't auto-convert to
integers.
A disadvantage is that the enums now have to be cast to int
explicitly when used to index an array.
Replace two hash-maps in MainWindow to arrays of fixed sizes.
Move the application-state details into their own files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A user reports a problem when dives have the same time but different
numbers. The dives appear sorted randomly (effectively they are sorted
by an internal unique-id).
Try to sort by number for dives at the same date in this case.
Fixes#2086
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
At some places we use UTF8 string literals. Therefore, we effectively
only support UTF8 build systems. We might just as well remove all
the other UTF_* macros and use direct string literals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some dive computers save GPS data. Currently, this is stored
by libdivecomputer in an "extra field". When generating a
new dive site for a dive try to use this data to place the
dive site.
To do so, create a "dive_get_gps_location()" function. This
function can be extended later to use e.g. event. When creating
a dive site, use the result of this function over a potential
pre-existing dive site.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parse_location() function was used in three places. In two
of them, the declaration was in the translation unit. Instead,
move the declaration into a header file, to avoid duplication
and the possibility of inconsistencies.
The "units.h" header was chosen as this is where location_t
is defined.
Moreover, make the string argument to parse_location() "const
char *", so that it can be used on non-owned buffers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This has been a feature people have asked for quite frequently. It is
taking up some valuable screen real estate - so the question could
become if there should be a switch to enable / disable it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds "Import->Import dive sites" menu to mainwindow.cpp and adds the
on_actionImportDiveSites_triggered() method to prompt for the filename
to import from. The files are parsed and then any dive and trip data is
cleared before opening a dialog box to select which sites are to be
imported.
Signed-off-by: Doug Junkins <junkins@foghead.com>
Fixed bug in the Haversine function in get_distance() based on algorithm
at https://www.movable-type.co.uk/scripts/latlong.html and added bounds
to the 'a' term to avoid floating point errors for antipodal points.
Signed-off-by: Doug Junkins <junkins@foghead.com>
This didn't use to matter, because none of the BLE-using backends did
retry on timeout until recently.
But Jef started doing packet sending retry for the Mares Icon backend,
and now we should make sure to distinguish the "IO failed" from "IO
timed out" cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit adds an entry to the dive media context
menu which offers to write a subtitle file. This
creates an .ass file for the selected videos.
In an attempt to to clutter the screen too much, don't
show irrelevant entries (zero temperature or
NDL and show TTS only for dives with stops).
VLC is able to show these subtitles directly, they
can be integrated into the video file with ffmpeg.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Commit c69ca4df80 removed the roleNames
function, which is not needed according to the docs, as a default function
is provided. For unknown reasons this broke the QML combo box.
Reinstate the function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Skip gas use calculation for the gas that was used in
the surface segment added by the planner in the end.
Reported-by: philippe@philmassart.net
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The dive splitting code returns an error code when splitting fails, but
it turns out that the C++ UI code doesn't actually look at the error
code, and instead expected the resulting dives to be NULL if an error
happened and the split didn't succeed for whatever reason.
Which is kind of lazy of it, but we might as well clear the resulting
dives and make the UI code happy. This should fix the problem that
Celia Marlowe reported on the Subsurface google groups forum.
Reported-by: Celia Marlowe
Acked-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fixes: 145f70aab5 ("Undo: implement split-out of dive computer")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only external caller of add_single_dive() used it to append a
dive to the global dive list. Rename the function accordingly and
remove the index parameter.
The internal caller can use the local insert_dive() function, which
doesn't consider selection. That shouldn't be a problem, as the
caller is doing import.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Trips and dive sites were changed to use dive tables instead
of linked lists. But the memory used for the tables wasn't freed.
Do this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Selecting "Selected dives" exports the dive sites for the selected
dives. Selecting "All dives" exports all dive sites.
XML format is the subsection of the divelog XML that describes the
sites headed with a <divesites> section like:
<divesites program='subsurface' version='3'>
</divesites>
Signed-off-by: Doug Junkins <junkins@foghead.com>
Instead of using a random UUID, use an SHA1 hash of name, description
and notes (if defined). This is necessary for testing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive_site_has_gps_location() function already checks for the null
dive site. Remove redundant checks.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Properly implement the unsaved-changes flag(s). Since we currently have
two kinds of changes, there are two flags:
1) dive_list_changed in divelist.c marks non-undoable changes. This flag
is only cleared on save or load.
2) QUndoStack::isClean() is used to determine the state of undoable
changes. Every time the user returns to the state where they saved,
this flag is cleared.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is copying the dive editing code. It uses an OO design with
virtual functions for getting and setting the values. It doesn't
use templates though, as both fields of strig type. This feels
a bit over-engineered, but it is 1) consistent with the dive edit
code and 2) the number / types of dive trip fields might increase.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When pasting (or undoing paste) the cylinders or weights may change.
Send the appropriate signals and update the models accordingly.
Currently, this means copying from current dive to displayed dive,
but hopefully we can get rid of "displayed_dive" in the not so
distant future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove a few cases of
void fun() {
...
}
While touching these functions, fix a few other whitespace
coding style violations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Taglists were only copied in dive.c using the STRUCTURED_LIST_COPY
macro. Export that functionality in a function. This will be
needed for undo of dive-pasting.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive list was not updated automatically when an edit command was
executed. There was already a signal to do that, viz. divesChanged().
But that signal worked by-trip and didn't have a dive-field specifier.
The edit-commands used the divesEdited() signal that isn't by-trip
but has a dive-field specifier.
Unify these two signals to be by-trip and with dive-field specifier.
This needs common code to generate the by-trip list that is moved to
a command_private.h header.
Since there might now be multiple signals (one per trip) actually
check in the main-tab whether the current trip is affected to
avoid multiple update of fields. This has the positive(?) effect
of not doing any update if the current dive isn't changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was a bit different from the other editing commands:
1) Only the current dive is edited not all selected dives.
Therefore, create a function that turns the current dive
into a one-element list.
2) The profile has to be replot. Here, likewise, create a
function to do that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit more tricky. There are two modes: set dive site
and set newly created dive site. This is realized using an OO model
with derived classed. Quite convoluted - but it seems to work.
Moreover, editing a dive site is not simply setting a value,
but the list of dives in a dive site has to be kept up to date.
Finally, we have to inform the dive site list of the changed
number of dives. Therefore add a new signal diveSiteDivesChanged.
To send only one signal per dive site, hook into the undo() and
redo() functions and call the functions of the base class there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To keep the UI in a consistent state, update the notes field if
it is changed by an undo command. To that purpose, add a new
signal to diveListNotifier with a list of dives and a field-id
as payload.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one was rather trivial, as there is no actual merging
done. Quite simply, a number of dive sites are removed and
their dive added to a different dive site.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement an undo command that edits the name of a dive site.
Connect it to the dive site table, so that names can be edited
directly in the table.
Send signals on undo / redo so that the dive site table and
the dive site edit widget can be updated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce two DiveListNotifier signals which are sent by
the undo commands if dives are added to / removed from the
core.
The signal has the dive site and the index in the global
dive site table as payload. Thus, the model has only to
remove the appropriate rows.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Turn the table functions of the dive site handling into macros
as was already used for dives and dive trips. This has the effect
that the table is kept sorted by UUID.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
dive- and trip-table functions are generated in dive.c by macros.
Move this macros to a new "core/table.h" header file.
Thus, these functions can be used for other tables (e.g. dive site)
and the trip function can be moved to a separate translation unit
(divelist.c being quite large already).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The other dive- and trip-table functions were already autogenerated.
Let's do the same for these two.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency with remove_dive(). Moreover, swap parameter order
in remove_dive() so that both functions use the same parameter order.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a new signal to DiveListNotifier. Send signal if dives are
added or removed and therefore the dive count of a dive site
changes. The dive sites are collected and the signal is sent
at the end of the command.
Add code to update the table view.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) The second parameter (selected_only) was always false. Therefore,
remove it.
2) Simplify the function by simply returning the reference count.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of setting dive->dive_site directly, call the
add_dive_to_dive_site() and unregister_dive_from_dive_site()
functions. In the parser this turned out to be a bit tricky.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a dive site table to each dive site to keep track of dives
that have been added to a dive site. Add two functions to add
dives to / remove dives from dive sites.
Since dive sites now contain a dive table, the order of includes
had to be changed: "divesite.h" now includes "dive.h" and not
vice-versa. This caused some include churn.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function is defined in qthelper.c and thus not all users
of dive.h have to suck in the xslt headers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declaration of these functions to "file.h" and "parse.h"
according to the translation unit they are defined in. Thus, not
all users of "dive.h" have to suck in "sqlite3.h".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the UUID will be overwritten on save and is only used on save
and load, set it only on save or load. For other created dive sites,
leave the UUID field uninitialized.
This means that the UUID will change between saves. Let's see how
the git saver handles that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We absolutely want to avoid dive site with the same UUID.
But that could happen when reimporting a log where the
dive sites diverged.
Therefore, on adding a dive site to a table, change the UUID
if it already exists. Since dives are associated to dive
sites with pointers, this should have no negative impact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code used dive site uuids, which are not really used anymore.
The only caller of this function does certainly not use a copy,
so let's compare pointers instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As opposed to dive trips, dive sites were always directly added
to the global table, even on import. Instead, parse the divesites
into a distinct table and merge them on import.
Currently, this does not do any merging of dive sites, i.e. dive
sites are considered as either equal or different. Nevertheless,
merging of data should be rather easy to implement and simply
follow the code of the dive merging.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To extend the undo system to dive sites, the importers and downloaders
must not parse directly into the global dive site table. Instead,
pass a dive_site_table argument to parse into.
For now, always pass the global dive_site_table so that this commit
should not cause any functional change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To enable undo of dive site functions, it is crucial to work
with different dive site tables. Therefore add a dive site table
parameter to dive site functions. For now, always pass the global
dive site table. Thus, this commit shouldn't alter any functionality.
After this change, a simple search for dive_site_table reveals all
places where the global dive site table is accessed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
-return the result instead of storing in a parameter, we now know that the list
contains only those results that are generated in the function
-allocate the result with the correct length right from the start
-do not iterate over keys of a map and then do a map lookup to get the value but
use an iterator that gives us both right from the start
-remove one call alltogether as the results were not used there
Signed-off-by: Rolf Eike Beer <eike@sf-mail.de>
See https://www.kdab.com/goodbye-q_foreach/
This is reduced to the places where the container is const or can be made const
without the need to always introduce an extra variable. Sadly qAsConst (Qt 5.7)
and std::as_const (C++17) are not available in all supported setups.
Also do some minor cleanups along the way.
Signed-off-by: Rolf Eike Beer <eike@sf-mail.de>
This is only in Qt 5.7 and therefore can't be used in Qt 5.5 and 5.6
builds. Moreover, we can't simply reuse Qt's version owing to
licensing concerns.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When merging two dives into a longer one, merge the dive computer
extra_data list too.
We just pick all the extra-data (but avoid entirely duplicate key/value
entries).
Note that this can cause confusing extra-data, in that both dives migth
have things like "battery percentage at beginning/end of dive" keys, and
if the values are different, you'll now get *both* of those values, but
that's better than randomly just taking one of them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow splitting out a dive computer into a distinct dive. This
is realized by generating a base class from SplitDive.
This turned out to be more cumbersome than expected: we don't
know a-priori which of the split dives will come first. Since
the undo-command saves the indices where the dives will be insert,
these have to be calculated. This is an premature optimization,
which makes more pain than necessary. Let's remove it and
simply determine the insertion index when executing the command.
Original code by Linus Torvalds <torvalds@linux-foundation.org>.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This introduces a csv file that contains the data from
the structs defined in profile.c, in particular all
deco information computed for the dive profle (including
NDL, TTS, ceilings, surface GFs etc).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
QPref has only static functions. There seems to be no point in
instantiating a singleton of this object. Remove the instance()
method and remove the Q_OBJECT macro.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These two member functions were never used, but cause frequent
recompilation of the qPref.cpp file. Remove them for now until
their usefulness becomes evident.
These were the only functions tested in test_qPref.qml. Therefore
remove this test-file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This import is based on one sample I received. It was exported from some
Mares software. Imported data is somewhat limited, but we do get the
depth and temperature profiles. (I would love to receive some more
sample logs to validate the import and to enhance the data we are
grabbing.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
to display the deco parameters at the surface,
in particular tissue saturation and heat map.
Suggeted-by: Matthias Heinrichs <info@heinrichsweikamp.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
-avoid object copies
-use some more bullet proof C++11 constructs
-avoid using a QRegExp, simple string matches are faster
Signed-off-by: Rolf Eike Beer <eike@sf-mail.de>
The oldest version tested on TravisCI is Qt 5.5, which is also what is in
Ubuntu 16.04. Drop all the older cruft, noone should use that anymore.
Signed-off-by: Rolf Eike Beer <eike@sf-mail.de>
add_to_string() frees the original string that is passed in. This
should therefore not be of "const char *" type, as the contents
of the string *will* be modified (or more precisely: destroyed).
Same for the congener smtk_concat_str().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
printGPSCoords() returned a newly allocated C-style string. Most
callers simply made a QString out of it and freed the C-style string.
This is paradoxical, as printGPSCoords internally works with QStrings
and converts them to C-style on return.
Therefore, let printGPSCoords() return a QString and create a
printGPSCoordsC() wrapper for the two C-callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The printGPSCoords() function returns a copied C-style string. Since
the owndership is transferred to the caller, the correct return type
is "char *" instead of "const char *".
Thus a number of casts when calling free can be removed.
Moreover a number of callers didn't free the string and thus were
leaking memory. Fix them. Ultimately we might want two versions
of the function: one for QString, one for C-style strings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The complicated setup with the AddressRole is unnecessary. All we want to be
able to do is get the index of a specific text in the list. In hindsight I am
puzzled why I implemented this in such a complex fashion.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All these aren't actually things that need fixing, they are observations about
the code.
Given that LGTM.com reports FIXME comments as Alerts, let's change the ones
that aren't about things that need fixing to something more harmless.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To test single bits, datatrak.c would transform bytes into
malloc()ed char[8] buffers. Instead, simply introduce a function
to test individual bits. This should make it distinctly easier for
the compiler to optimize away.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It's a drop in the bucket, but let's remove some unnecessary
global variables. With one exception these variables were only
used in one function anyway. The other one can be passed as a
parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Having a parameter representing a location with the same name as a global
variable representing our locale is confusing.
Found via LGTM.com
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While in the specific calculations here there isn't really a risk that float
might overflow, it seems odd to cast to float in order to assign to double.
This caused an Alert via LGTM.com
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added stats_t structures to summarize dive statistics by depth and
by temperature.
Process each dive to add the dive stats to the proper depth and
temperature bucket. Buckets are defined using constants
STATS_MAX_DEPTH, STATS_DEPTH_BUCKET, STATS_MAX_TEMP, and
STATS_TEMP_BUCKET which are defined in statistics.h
Signed-off-by: Doug Junkins <junkins@foghead.com>
Owing to a variable reuse in a nested loop, importing dive logs
with new trips could lead to an infinite loop. Use a fresh index "j".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since ff9506b21b the downloaders don't
add dives to a new trip and therefore the tripTable field of
DownloadFromDCThread became pointless. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since ff9506b21b the downloaders don't
add dives to a new trip and therefore the trip field of dc_user_device_t
became pointless. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since ff9506b21b the downloaders don't
add dives to a new trip, but the import code does. Remove the
code in the Uemis downloader that would remove a dive from the trip.
The code has been broken recently anyway (instead of testing for trip,
it tested for the notrip flag, which make no sense whatsoever).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some of the functions declarations were not in 'extern "C"',
despite being C functions. This worked only because they weren't
called from C++. Nevertheless, it seems like a dangerous proposition
to have the same function declared once as C and once as C++.
Therefore, always put them in extern "C" (if compiling in C++ mode,
evidently).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the XML and git savers, unchanged webservice-dive sites were
deleted. Since the webservice is not functional anymore, remove
this code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was defined in divelist.c, whereas it's better located
in divesite.c. Move it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function dive_set_geodata_from_picture() is only used in
dive.c. Make it local to that translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
And offer an option to show all devices in the settings. This is intentionally
not stored in the preferences as this should never be needed. We don't support
BT or BLE dive computers that we don't recognize. This is a last resort in case
a new firmware were to change the name or some other weird issue causes us not
to recognize a dive computer - and that should be fixed instead of worked
around.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By default we'll only show devices that we believe to be dive computers,
but the user can override that with the recently introduced check box.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The thumbnails were fetched in the background to achieve a
snappier UI. The problem with that is that on LaTeX etc.
export only placeholder thumbnails were shown.
Therefore, implement a synchronous mode. This only tries
to fetch cached thumbnails or calculate thumbnails for
images. Videos and remote files are not supported.
Fixes#1963
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The info box can get longish. Offer the user to turn
off display of deco information (surface GF and
individual ceilings).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The most recent firmware of Shearwater computers shows this.
This is a measure of absolute amout of tissue loadings in an
easy to digest unit. Therefore it is useful to have.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
At least on a Mac we can get here without a discoveryAgent if BT is off,
so don't derefence the NULL pointer in that case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While in theory the DEVINFO event should give us the correct detected
product, it's also possible that the code that usually detects the
product gave up and returns an unknown model.
Try to have the message reflect that situation more accurately.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
process_imported_dives() takes four boolean parameters. Replace these
by flags. This makes the function calls much more descriptive. Morover,
it becomes easier to add or remove flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since process_imported_dives() can add dives to a newly generated
trip, this need not be done in the downloading code. This makes
data flow distinctly simpler, as no trip table and no add-new-trip
flag has to be passed down to the libdivecomputer glue code.
Moreover, since now the trip creation is done at the import step
rather than the download step, the latest status of the "add to
new trip" checkbox will be considered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If this flag is set, dives that are not assigned to a trip will
be assigned to a new trip. This flag is set if the user checked
"add to new trip" in the download dialog of the desktop version.
Currently this is a no-op as the dives will already have been
added to a new trip by the downloading code. This will be removed
in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The logic in process_imported_dives() was faulty: Dives are merged
trip-wise in a loop. But if only autogenerated trips were supposed
to be merged, the trip would not be added.
Change the logic to always add the trip if it is not merged. To make
the loop easier to read, factor out the merge-trip-into-existing-trips
logic into a separate function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since recent commits, dive-trips are not added directly to the core,
but into separate trip tables (see ec37c71f5e).
These commits did not finish the work for the download-from-dc
case.
Add an extra trip_table field to device_data_t. If trips are created
(user selected "Download into new trip"), the trip will be created
in that table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 4d06ddd723 removed deletion of
unused dive sites on save. The corresponding variables were not
removed leading to compiler warnings. Remove the variables too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When no real name is set in /etc/passwd the username ends
up being ",,,". Git does not like that. Actually, only the
part before the first comma is the name, the rest is office
and phone number. We don't want those.
Before we only testing for the username being a NULL pointer.
Reported-by: Keith Grimes
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This adds a checkbox for rebreather modes of the planner
that force the ascent to be in OC mode. Before, one had
to add a one minute last segment with the mode change but
this is not practical when manually searching for the
maximal bottom time given gas reserves.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Split the process_imported_dives() function in two:
1) process_imported_dives() processes the dives and generates
a list of dives and trips to be added and removed.
2) add_imported_dives() calls process_imported_dives() and
does the actual removal / addition of dives and trips.
The goal is to split preparation and actual work, to
make dive import undo-able.
The code adds extra checks to never merge into the same
dive twice, as this would lead to a double-free() bug.
This should in principle never happen, as dives that
compare equal according to is_same_dive() are merged
in the imported-dives list, but perhaps in some pathologival
corner-cases is_same_dive() turns out to be non-transitive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The installment of the divelist-undo system has made it unnecessary
to adopt the uniq-id of the merged-into dive. On the contrary, we
want to avoid two dives with the same dive-id in the divelist at
all costs, since get_divenr() still uses the id and thus may fetch
the wrong dive.
Therefore, don't copy the dive-id on merge.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing log-files we generally want to merge trips. But
when downloading and the user chose "generate new trip", that
new trip should not be merged into existing trips.
Therefore, add a "merge_all_trips" parameter to process_imported_dives().
If false only autogenerated trips [via autogroup] will be merged.
In the future we might want to let the user choose if trips
should be merged when importing log-files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old way of merging log-files was not well defined: Trips
were recognized as the same if and only if the first dives
started at the same instant. Later dives did not matter.
Change this to merge dives if they are overlapping.
Moreover, on parsing and download generate trips in a separate
trip-table.
This will be fundamental for undo of dive-import: Firstly, we
don't want to mix trips of imported and not-yet imported dives.
Secondly, by merging trip-wise, we can autogroup the dives
in the import-data to trips and merge these at once. This will
simplify the code to decide to which trip dives should be
autogrouped.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the future we want to download trips into a distinct trip-table
instead of the global trip-table to allow for undo of import.
Therefore add a trip_table argument to DiveImportedModel::repopulate()
and a trip_table member to DiveImportedModel. To correctly set these,
add a DownloadThread::trips() function, which currently simply returns
the global trip table.
Finally, make "struct trip_table *" a Q_METATYPE, so that the corresponding
arguments can be passed from QML.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To allow parsing into arbitrary trip_tables, add the corresponding
parameter to the parsing functions and the parser state. Currently,
all callers pass the global trip_table so there should be no change
in functionality. These arguments will be replaced in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently trips are added to the global trip table. If we want to
make dive-import undoable, we should be able to parse trips of a
log-file into a distinct table. Therefore, add a trip_table
parameter to
- insert_trip()
- create_and_hookup_trip_from_dive()
- autogroup_dives()
- unregister_trip()
- remove_dive_from_trip()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, all trips are kept in a linked list. Replace the list
by a table in analogy to dive_table. Use this to keep the trip_table
sorted as suggested by dump_trip_list(). When inserting a trip into
the table do that after adding the dives, to avoid warnings coming
out of dump_trip_list().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 64e6e435f8 the trip->when field
was replaced by a function. This forgot to adapt dump_trip_list(),
which is only compiled if DEBUG_TRIP is defined. Fix the function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rename
- dive_get_insertion_index() -> dive_table_get_insertion_index()
- unregister_dive_from_table() -> remove_from_dive_table()
- get_idx_in_table() -> get_idx_in_dive_table()
- sort_table() -> sort_dive_table()
This will make it more straight-forward to generate these functions
from macros.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was not used outside of divelist.c, therefore make it
local. Moreover rename it to add_to_divetable so that the name
is generic and can be generated by a macro.
Moreover, remove the special case idx = -1, which would determine
the insertion index. Instead let the single caller who used this
feature do this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently autogroup_dives() groups all dives in the global dive
list. Add a table parameter so that dives in any table can be
grouped. Thus it will be possible to pre-group dives on import,
which will be used for undo of import.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After loading or importing, the caller usually called autogroup()
to autogroup dives if so wished by the user. This has already led
to bugs, when autogroup() was forgotten.
Instead, call autogroup() directly in the process_loaded_dives()
and process_imported_dives() functions. Not only does this prevent
forgetting the call - it also means that autogrouping can be
changed without changing every caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Unused dive sites were deleted on save. This clashed with the undo
system in the following scenario:
1) Delete single-use dive site.
2) Save (dive site deleted)
3) Undo (reference to freed dive site)
Therefore, as a quick-fix, keep the referenced dive site around.
Note that this also means that empty dive sites must not be
deleted, as it might refer to a dive in the undo system. Instead
only clear references to empty dive sites in the global dive
table. Factor this functionality out, as it was common to the
XML and git savers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The starTimestamp is 4 hours apart on 2 different DCs within the sample
log. DiveDate on the dive_logs table seems to be correct, but must be
converted from human readable format.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Seems that Shearwater cloud stores sample rate into the database and
it is not constant within the log.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
This works to some extent to part of a sample log I received. However,
still quite a bit more work is needed.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
I encountered this while implementing Shearwater Cloud import, but it
makes sense to increase the size for dive id for Shearwater Desktop as
well.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
wcslen() returns the number of characters in a wchar_t string.
In the case of WideCharToMultiByte() an estimate for the size of
the utf8 buffer is needed. Using wcslen() is incorrect for such a buffer,
because for any non-ASCII character the estimate will be off by 1 byte.
Call the following instead to obtain the proper UTF8 buffer size
for the conversation:
WideCharToMultiByte(CP_UTF8, 0, utf16, -1, NULL, 0, NULL, NULL);
Also fix some missing "\n" in fprintf() calls.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
After upgrading to Qt 5.12.0, download over BT from a DC did not work
any more. On the console the message "Connecting to port is not
supported (Uuid required)". Linus noticed earlier that we do rather
strange processing in this part of the code related to selecting port 1
or port 5. This all seems not needed (any more), but broader testing is
advised. This being stripped from the code, the mentioned error from Qt
persisted. That is strange in itself, as we did not reference port
numbers any more.
Step 2 in this commit is actually using an uuid to the call to
connectToService. Choosing an uuid seems relatively straightforward as
we can use the same one we already use for Android. That is the default
BT RFCOMM Serial Port Profile uuid. Interestingly, when changing to this
uuid we run immediately in a Qt runtime error telling us "QDBusPendingReply:
type ManagedObjectList is not registered with QtDBus.". For these 2
unexpected Qt messages, QTBUG-72742 was made. Studying the Qt source
code at this point reveals a possible workaround. Simply create a local
QBluetoothLocalDevice object, which, behind the scenes registers the Qt
internal ManagedObjectList with QtDBus.
In the meantime, Qt agrees that QTBUG-72742 is valid, and that a fix is
to be expected in a future version. At that point in time, the
declaration of the QBluetoothLocalDevice can be deleted again.
In the end, interfacing over BT works again.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is an attempt to fix issue #1896. While this seems a Qt issue in
combination with very specific Android devices, this might be a fix. Do
not check for a very specific state of the local BT controller, but just
check if it is powered on.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In commit 6bf4120dbb the trip-flags
were replaced by a simple boolean. This made the was_autogen
parameter to the remove_dive_from_trip() and unregister_dive_from_trip()
functions unused. Remove these parameters.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Just like with the Aqualung i770R in 7697003498 this name follows the
pattern of a model number in ASCII encoding, followed by the serial
number of the device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make data flow more clear, unglobalize the downloadTable object.
Make it a subobject of DownloadThread. The difficult part was making
this compatible with QML, because somehow the pointer to the
download-table has to be passed to the DiveImportedModel. Desktop would
simply pass it to the constructor. But with objects generated in QML
this is not possible. Instead, pass the table in the repopulate()
function. This seems to make sense, but for this to work, we have to
declare pointer-to-dive-table as a Q_METATYPE. And this only works
if we use a typedef, because MOC removes the "struct" from "struct
dive_table". This leads to compilation errors, because dive_table is
the symbol-name of the global dive table! Sigh.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DCDeviceData was using that weird pattern where the instance
variable was set in the constructor. There is no apparent
reason to do so, therefore convert to a "normal" singleton.
Access that directly in QMLManager instead of saving it in
a member variable first.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The simplified filter-widget doesn't present lists of existing values
with counts. Thus, a whole slew of count_dives_with_*() functions
can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These two functions were called in different contexts:
- unregister_dive(): from the undo-commands to remove the dive
from the global dive table, but not delete it. The dive was
already removed from its trip.
- delete_single_dive(): from non-undo code. Most of it not in
use and removed in a sibling-commit. Here, the dive is supposed
to be removed from its trip and a new selection is calculated.
delete_single_dive() calls unregister_dive(), which removes the
dive from its trip. Move remove_dive_from_trip() from the former
to the latter and make both functions independent. Instead
of deleting the dive explicitly in delete_single_dive(), call
the delete_dive_from_table() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All callers of add_dive_to_trip() work on freshly generated dives,
with one exception, that was redundant anyway. Therefore it is not
necessary to remove the dive from a potential previous trip. Move the
responsibility of removing the dive from a trip to the caller,
respectively remove the redundant call. Add a warning message in the
case that trip is set.
Background: On import (either download or file-import) we might not
want to add trips to the global trip-list. For example to enable undo
of import but more generally to detangle that data flow. Thus,
add_dive_to_trip() should not mingle with the global trip-list,
which it has to do if a trip is deleted because the old dive was
removed.
Analysis of the add_dive_to_trip() callers:
1) core/dive.c
pick_trip():
called on freshly generated merged dive.
finish_split():
called on two freshly generated split dives.
2) core/divelist.c
create_and_hookup_trip_from_dive():
called on freshly downloaded dive in dive_cb().
called on freshly downloaded dive in record_uemis_dive().
autogroup_dives():
called on dive from get_dives_to_autogroup(), which only
finds dives that are outside of trips.
combine_trips():
unused - removed in sibling commit.
try_to_merge_into():
this call was actually erroneous - dive was already added
to trip in try_to_merge(). Remove call.
3) core/libdivecomputer.c
dive_cb():
called on freshly downloaded dive.
4) core/uemis_downloader.c
record_uemis_dive():
called on freshly downloaded dive.
5) core/load_git.c
create_new_dive():
called on freshly allocated dive.
6) core/parse.c
dive_end():
called on freshly parsed dive.
7) desktop-widgets/command_divelist.cpp
DiveListBase::addDive():
called on dive which is newly added to core.
moveDiveToTrip():
called on dive that was removed from trip a few lines above.
8) mobile-widgets/qmlmanager.cpp
QMLManager::undoDelete():
called on dive where divetrip was reset in the previous line.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 302f6adb79 dive-splitting was made
undo-able. To this goal, the dive-splitting functions were split in
two types: Those that operate directly on the divelist and those that
only allocate the dives. The former are not in use anymore, therefore
remove them. Since only the latter remain, remove the "_dont_insert"
appendix of the name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 014c04f8bd merging dives was included
in the undo-system. This made the merge_two_dives() function caller-less.
Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In f427226b3b autogrouping / removal
of autogrouping was moved into the undo-machinery. This made the
remove_autogen_trips() function caller-less. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In f427226b3b a combine_trips_create()
function was introduced that combined trips without deleting the old
trips. This was necessary for making combine-trips function undo-able.
The old combine_trips() function is not used anymore. Therefore remove
it. Rename the combine_trips_create() function to combine_trips() as
no differentiation is needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, when selecting "Load media files even if time does not
match the dive time", the media are added to *all* selected dives.
Instead add it to the closest dive.
This seems like the less surprising behavior. Of course now if the
user really wants to add a media file to multiple dives, they will
have to do it manually.
To avoid a messy interface, this is solved by moving the iterate-
over-selected-dives loop to the core. Thus, a helper-function can
be made local to its translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
EMPTY_DIVE_STRING used to be a string-literal representing missing
information ("--"). In 6985c123d4 it
was replaced by the actual empty string. Using a literal to represent
the empty string seems a bit pointless, therefore remove it completely.
Notably:
QString(EMPTY_DIVE_STRING) -> QString()
if (temp.isEmpty()) temp = EMPTY_DIVE_STRING; -> noop
if (s == EMPTY_DIVE_STRING) -> if (s.isEmpty())
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In dive.h there was a redundant 'extern "C"' block defined inside
another 'extern "C"' block. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Desktop used the hidden_in_filter flag in struct dive, mobile
used its own vector plus a new showndives member in struct dive_trip.
Unifiy these to use the same core-facility, viz. hidden_by_filter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functionality was used by the desktop filter. To unify desktop
and mobile, move it into two new functions in divelist.c
Since one of them is the only caller of is_same_day() move that
likewise into divelist.c and make it of static linkage.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QML's ListView uses the "section" property to test if items belong to the
same section. Apparently, this must be a string and therefore we can't
pass e.g. a dive-trip object. Therefore a specially formatted string
was passed in, which was guaranteed to be unique (contained the dive-trip
pointer value) and the fully formatted trip-title and short-date.
The disadvantage of that approach is that the formatting is performed for
every dive and not every trip. Perhaps not a problem now, but it makes
it for example necessary to cache the number of filtered dives.
To be more flexible, pass in only the pointer value formatted as
hexadecimal string and provide a function to convert that string
back to a trip-pointer (in the form of a QVariant, so that it can
be passed to QML). Moreover provide two functions for formatting the
title and the short-date.
The three new functions are members of DiveListSortModel. This might not
be the perfect place, but it is easy to reach from the DiveListView.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveObjectHelper::trip() function was
1) Misnamed: it returned the *location* of the trip
2) Not used outside of DiveObjectHelper
Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Just as we did for pointer to struct dive_site, make pointers to
struct dive and struct dive_trip "Qt metatypes". This means that
they can be passed through QVariants without taking a detour via
void *.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement the protocol in Erik Baker's document
"Oxygen Toxicity Calculations". This code uses a
third-order polynomial approximation of Baker's
equation 2. Provision is made for
PSCR and CCR dive logs and dive plans. In the
case of dive logs, the values of o2 sensors are
used if there are data from such sensors. For CCR
only the data from the first O2 sensor is used even if
there are more than one sensor. This is a potential
weakness, but this function is probably NOT the
place to calculate mean o2 values accross all sensors
and to emulate voting logic to reject info from
aberrant sensors.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In 64e6e435f8 the when field of struct
trip was removed. Accordingly it was not read from git repositories.
This produced a large amount of user-visible error messages.
Reinstate the trip-date and time parsing functions, but ignore
the value.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 6b283e598a replaced the linked
list of dives in a trip by a table. Embarassingly, on dive deletion
the index of the dive in the table was compared for "!= 0" instead
of ">= 0". Thus, the first dive of a trip wouldn't be deleted, which
ultimately led to a crash, as different parts of the code were now
in disagreement over whether the trip is empty or not.
Fix the comparison.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only remaining use of the tripflag was to mark dives that
were removed explicitly from a trip, i.e. shouldn't be autogrouped.
Therefore replace the enum by a simple boolean.
Currently, there is no way of unsetting the notrip flag. But this
shouldn't result in a user-visible change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The distinction between ASSIGNED_TRIP and IN_TRIP was used to
prefer non-autogenerated trips on merging of dives. But owing
to bit rot this seem to have worked only partially anyway:
The IN_TRIP field was set in create_and_hookup_trip_from_dive()
and immediately overwritten in add_dive_to_trip() called
in the next line.
Instead, use the trip->autogen flag to check for priority and
remove the ASSIGNED_TRIP flag alltogether.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since upgrading to gcc 8.2 it produces noisy warnings about
potentially truncated strings. It doesn't recognize that
filenr can never become >4000. So clamp it down explicitly.
Do this by adding a function that does the assembly of the
filename path. Adding unnecessary code to silence compiler warnings
is dubious, but in this case it might be reasonable.
Fix a second instance by increasing the stack-allocated buffer
to 32 bytes. Hopefully nobody has more divespots than would
fit in a 9-decimal digit number!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding the dive to its trip before having filled out "when", the
dive gets added at the first position (when=0), which is usually not
correct. Instead, add the dive to its trip when all fields are correctly
filled out.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The when field gives the time of the first dive. Instead of keeping
this field in sync, replace it by a function that determines the time
of the first dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To make sorting more controlled, move all sorting functions into
the core. For this, introduce a "dive_or_trip" structure, which
represents a top-level item. Adapt the DiveTripModel accordingly.
There are now three sorting functions:
1) dive_less_than
2) trip_less_than
3) dive_or_trip_less_than
These should be used by all sorting code. By moving them to a
single place, the mess can hopefully be cleaned up.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As a step towards proper sorting, introduce a trip_less_than()
function in core. It simply sorts by the first dive, which should
be unique as dives may belong to only one trip.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dives of each trip were kept in a list. Replace this by a
struct dive_table. This will make it significantly easier to
keep the dives of a trip in sorted state.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Up to now, dives were added to the global dive table with
add_single_dive(). Split out the funtionality to add a dive to
an arbitrary dive in the add_dive_to_table_function(). The
difference compared to record_dive_to_table is that dives
are added at a specific position or the sort-criterion given
by dive_less_than(). This will allow to use a dive tabe for trips
instead of a linked list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were two versions of the insert_trip() function: one
would merge trips if a trip with the same date already existed,
the other wouldn't. The latter was introduced with the dive-list
undo work.
The problem is that the "date" of a trip (i.e. the first dive)
seems ill-defined as this is a volatile value. Moreover in
the context of making dive-import undoable this is a very
dangerous notion, as the caller needs control over when the dives
are added to a trip.
Therefore, unify these two functions and never merge trips.
The decision on merging dives now has to made by the caller.
This will be implemented in a future commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The Cressi specific PID was not used
when serial_ftdi_open_device tried
to open the device.
Reported-by: Daniel Krupp
Signed-off-by: Daniel Krupp <daniel.krupp@gmail.com>
The DiveTripModel places dives after trips in chronologically
ascending mode if the dive and the trip start at the same instant.
But in the core the sort order was undefined. This could lead
to a discrepancy. Therefore, implement the same sort-criterion
in the core code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Update table of maximum oxygen exposure durations, used in CNS calulations.
This table shows the official NOAA maximum O2 exposure limits
(in seconds) for different PO2 values. It also gives
slope values for linear interpolation for intermediate PO2 values
between the tabulated PO2 values in the 1st column.
Top & bottom rows are inserted that are not in the NOAA table:
(1) For PO2 > 1.6 the same slope value as between
1.5 & 1.6 is used. This exptrapolation for PO2 > 1.6 likely
gives an underestimate above 1.6 but is better than the
value for PO2=1.6 (45 min). (2) The NOAA table only
tabulates values for PO2 >= 0.6. Since O2-uptake occurs down to
PO2=0.5, the same slope is used as for 0.7 > PO2 > 0.6.
This gives a conservative estimate for 0.6 > PO2 > 0.5. To
preserve the integer structure of the table, all slopes are
given as slope*10: divide by 10 to get the valid slope.
The columns below are:
po2 (mbar), Maximum Single Exposure (seconds), single_slope,
Maximum 24 hour Exposure (seconds), 24h_slope */
Then update Calculations of the CNS for a single dive -
this only takes the first divecomputer into account.
The previous version of the code did a table lookup and
used the max O2 exposure for the next-higher PO2 category.
This gave a shorter max O2 exposure time and a higher CNS
contribution for a specific dive segment, resulting in a
slightly conservative value of CNS, often some 2 - 3 % too high.
This code does an interpolation for PO2 values inbetween
PO2 entries in the lookup table and therefore results in a more
accurate maximum O2 exposure time for that PO2.
The maximum O2 exposure duration for each segment
is also calculated based on the mean depth of the two
samples (start & end) that define each segment. The CNS
contribution of each segment is found by dividing the
time duration of the segment by its maximum exposure duration.
The contributions of all segments of the dive are summed to
get the total CNS% value. This is a partial implementation
of the proposals in Erik Baker's document "Oxygen Toxicity Calculations" */
Overall, this PR does not radically alter the existing CNS calculation,
it only makes it more accurate and more consistent by doing
interpolation and by using mean segment depth to find PO2.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Adapt get_trip_date_string() to use the same logic as get_dive_date_string():
Use the static "loc" object to translate date. Before, the trip
date was shown in C locale.
Reported-by: Philippe Massart <philippe@philmassart.net>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a stray semi-colon on the beginning of a line in
DiveObjectHelper.cpp. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Usage of the flags expanded, selected and fixup was removed some
time ago. Remove the flags too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For unrecognized locales we use en_US by default. It makes much more sense for
South Africa to use en_GB.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And fix a crash very similar to the previous commit. When trying to
save (to git) with an empty dive site, ssrf crashes.
Again, add a simple guard to prevent this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
With the fixed sematics of get_gasmix to return the new gasmix for
the time of a gas switch (added comments to make this clear), in the
OTU calculation we need the previous gasmix for the interval up to the
current time.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This fixes a subtle bug introduced in 5c4569247a which
unified two functions finding the gasmix at a given time
during the dive. There was a slight difference, though:
Does a gaschange exactly at that time count or not? For
the planner to work, the answer has to be in the affirmative.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Now that struct dive_site * is a proper Q_METATYPE it is not
necessary anymore to pass dive-sites as opaque uintptr_t types.
Simply pass a QVariants or directly via dive_site *.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was this ugly pattern of passing pointers-to-dive_site via
a QVariant of void * type. This is of course inherently unsafe.
Pass these pointers using their proper types instead. This makes
it necessary to register them in Qt's meta-type system. Doing so,
fixes a bug: QML couldn't call into updateDiveSiteCoordinates()
because it didn't know the type and thus the coordinates of
the moved flag were not reflected in the divesite-dialog.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
MapWidgetHelper::reloadMapLocations() used an array of uuids to
add dive sites to the map only once. Replace this by an array
of pointers. This is a small piece of a larger effort to remove
dive site UUIDs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace UUIDs by pointers to dive-site in mobile code. In both
cases, the value is transported via a QVariant. The function
getCoordinatesForUUID(), which was only used from mobile, can
be replaced by a getCoordinatesFor() function taking a variant
supposed to contain a dive-site pointer. Likewise, the variant
of the centerOnDiveSite function is now supposed to wrap a
pointer-to-divesite.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Another small step in removing dive-site UUIDs: use a pointer
instead of a UUID in the "uemis_helper" structure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing uuids, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes more of the dive-site interface to return pointers
instead of UUIDs. Currently, most call sites directly extract
UUIDs afterwards. Ultimately, the UUIDs will be generally replaced
by pointers, which will then simplify these callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The uemis downloader uses a cache for location to divesite id.
Trivially, the divesite-uuid can be replaced by a pointer. This
is a tiny step to remove divesite UUIDs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As a first step in removing dive-site uuids, change the interface
of the get_dive_site_*() functions to return pointers instead
of uuids. This makes code a bit more complicated in places where
the uuid is extracted afterwards (needed NULL check). Nevertheless,
these places should disappear once pointers instead of uuids are
stored in the dive-structures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Including ssrf-version.h in an include file that a lot of files depend on
caused a ton of unnecessary recompiles with every commit. This should reduce
that problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The reverseGeoLookup() function defined in qthelper.cpp has long
ago moved to its own compilation unit. It is not even defined in
the headers anymore. Remove it and the now unnecessary <QNetwork*>
includes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When creating a trip header (as it is used in the mobile app right now), we need
to show the number of dives shown, not the total number of dives in that trip.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We assume that any dive that gets added to a trip initially gets shown. The
filter logic then needs to make sure it adjusts this number (which then makes
it easy to tell the user how many dives of that trip are visible with the
current filter).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This feels a bit like cheating, but if we need to be able to make modifications
to the underlying dive and only have the helper object (for example inside of a
view model), doing everything through the helper object can turn into a real
performance issue.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this we can make it configurable if the search should include the notes field
and if the search should be case sensitive or not.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise we could match the end of one string and the beginning of the next,
so having a buddy name Linus and a dive master named Alvin would be matched
by USA.
Also add Notes to the full text search (I had forgotten those earlier).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A static variable was used to collect two parts of the location
string. Instead, explicitly store these two parts in two different
strings and concetenate them. One fewer variable and the program
flow is thus hopefully more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce a parser_state structure, which describes (most) of the
global parser state. Create such a structure in the entry routines
to the parser and pass it down to the individual functions. The
parser state is initialized and freed with the init_parser_state()
and free_parser_state() functions.
The main benefits are:
1) Isolation of parser state.
2) Keeping the global name space tidy.
3) Prevent memory leaks which could happen in truncated files by
freeing all the parser state after parse.
A somewhat controversial point might be that the individual
parsing functions are split in those that need parser-state and
those that don't. This means that there are now two versions of
the MATCH macro, viz. one for the former and one for the latter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is consistent with most other free_*() functions in the core
code and will make cleanup of parser state less verbose.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Export the free_picture() function from dive.c. The parser may need
this in case of truncated files to free its temporary resources.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Recently, the subsurface webservice was removed. Remove the corresponding
code in the parser. This removes a static variable, which was used
to generate unique dive-site ids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The variables country and city used in divinglog_place()
were never freed. Free them when the pointers are reset.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The utf8_string() function is used to extract whitespace-trimmed
strings. The function would happily overwrite the pointer to
the old string, which could therefore leak (suppose an XML has
redundant attributes).
Therefore preemtively free the string output parameter. This makes
it of course necessary to only pass in NULL-initialized pointers
or pointers to owned string.
The code survives the current set of parser-tests.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The deco parameters need special treatment to wire them up to the
underlying deco model code. And with the new preferences setup this
is a lot of boilerplate.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
On parsing of dive computer extra data, key/value pairs are stored
in global state. They are added to the dive computer with
add_extra_data(), which makes a copy of the string. The local
copies of the strings are never freed.
free() the strings after storing them. The data still leaks in case
of unfinished parsing of extra_data tags, but this will be
taken care of in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
delete_current_divecomputer() had some duplicate code to release
dive-computer resources. Use the free_dc_contents() function instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The serial and fw_version strings of struct divecomputer were copied
by pointer. This worked because they were never freed or modified.
Instead, do a deep copy of the strings and free them when appropriate.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On dive computer copy, the extra data (a list of key/value pairs)
was simply copied as a pointer. This worked because the list was
never freed nor modified. Copy and free the list on dive computer
copy and free, respectively.
This made it necessary to move the STRUCTURE_LIST_* macros up in
the dive.c file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In commit e5dca8228e a fixed order
of the arguments to merge_dives() was introduced: first dive old,
second dive downloaded. This made the dl variable, which pointed
to the downloaded dive useless. One instance was forgotten, which
led to a null-dereference.
Remove.
Reported-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
xml_parsing_units stores the units of the currently parsed XML
file. It is not used outside of parse-xml.c. Therefore, make
it of static linkage and remove the declaration from dive.h.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
sanitize_cylinder_type(), which is indirectly called from fixup_dive(),
had ft^3 -> mliter conversion code, which was executed on the
condition "xml_parsing_units.volume == CUFT".
But nowhere in the code base would xml_parsing_units.volume ever be
set to non-metric. Moreover, xml_parsing_units reflects the units
of the latest parsed XML file, but fixup_dive() is called in numerous
contexts not related to XML parsing. Therefore, the whole piece of
code seems highly questionable.
Remove this code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dive site data was collected in "cur_dive_site", which was then
merged into an existing or a new dive site. But only the struct
dive_site pointed to by "cur_dive_site" and the taxonomy data
were freed, not the textual data such as name or description.
Therefore, split out the approrpriate free-ing from the
delete_dive_site() function and call that instead of a simple
free().
A similar situation occured for dives that would not be added
to the dive-table because they were deemed incomplete. Use
free_dive() here instead of a simple free() too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I incorrectly thought that 'ci_pointing_to_guiding_tissue' was the only
missing initialization, because that is the only one valgrind pointed at.
... that is, until I started looking at a few more dives, which showed
that there were other parts tht weren't initialized either, like
double tolerated_by_tissue[16];
double tissue_inertgas_saturation[16];
double crushing_onset_tension[16]; // total inert gas tension in the t* moment
so just make sure to clear the whole data structure, to avoid any random
behavior due to uninitialized deco state.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In select_dive(), the selected dive would only be made the
current dive, if it wasn't previously selected. If multiple
dives were selected and the user clicked on one of them which
is not the current dive, then the current dive would be
deselected and thus not be the current dive anymore. The
only remaining dive would not be made the current dive,
because it was already selected. End result: null dive shown.
Therefore, always make the selected dive the current dive,
even if it is already selected.
Fixes#1792
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
copy_dc_renumber() is an internal function to copy dive computers
and renumber the cylinders. Since only the structure was copied,
in the case of multi-dc dives, the merged dives shared the same
computer. If one of them was freed, use-after-free crashes would happen.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used to track whether we had selected the native BT mode in the
download dialog. But the information is redundant as we can tell from the
device name whether this is a BT/BLE download or not.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
process_imported_dives() might delete the currently selected
dives. This could lead to use-after-free problems. Therefore,
reset the currently selected dive to the last dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On dive import, dives to be added may be merged into already
existing dives. In such a case, the dive to be added is deleted.
Before doing so, it must be removed from the trip is belongs to
to avoid corruption of the trip-list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On merging make a deep copy of the picture list, to avoid a use-after-free
crash after the orginal dive is deleted.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In commit 8c2383b495 dive merging was
changed to not modify the original dive. On import, dives were then
merged and the original deleted. The merge_weightsystem_info() was
not adapted accordingly (deep copy of string instead of pointer),
leading to a use-after-free crash.
Resolve this by doing a deep copy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of calling free() on all dives, call free_dive() which also
frees additional allocated data, not only the dive struct.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were two declaration of clear_table(), one in dive.h and one
in parse.h. The definition was in parse.c. Since the parser doesn't
even use the function, move the function and its declaration to
divelist.[ch] and remove the redundant declaration in dive.h.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This variable was only used in the divinglog_dive() function. There,
it was initialized right at the beginning and therefore there seems
to be no point in conserving its value across function-calls.
Make the variable local and remove the global version.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Comits f427226b3b and 43c3885249 of the undo series introduced 2 calls
of autogroup_dives() without checking the autogroup global boolean.
This is a bug. An import from DC (for example) then triggers an
autogrouping, the divelist is autogrouped, and the UI button
is off.
This commit solves this. I've chosen for a guard in the autogroup_dives()
that now is a no-op when called when the user did not select autogrouping.
In additon, simplified the other calls to this function, as we do
not need to check before calling any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The dive-site-edit widget uses a copy of the to-be-edited site
to compare with old values. Generally, this seems overkill
(the original dive-site can be used for such a comparison).
But one place where it can't simply be removed is the taxonomy,
because the widget needs a place to store the unsaved data.
Change the code to use an explicit taxonomy structure instead
of the one provided in the copy. This should ultimately allow
removal of the latter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The global object displayed_dive_site is used a a backing-store
by the dive-site-edit widget. All external accesses were removed,
therefore make the object local to the widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The global object "displayed_dive_site" is used to store the
old dive site data for the edit-dive-site widget. The fields
of the widget were initialized from this object in the show
event. Therefore the object was updated in numerous parts of
the code to make sure that it was up-to-date. Instead, move
the initialization of the object to the function that also
initiatlizes the fields. Call this function explicitly before
showing the widget.
This makes the data-fow distinctly easier to understand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
