This patch performs the following to the user manual:
1) Remove text refering to cursor position indications on the depth
and time axes of the dive profile panel (not present in V4.2).
2) Revise dialogue and image for the printing of a dive log, taking
into account the new feature for 1 dive/page.
3) Added a paragraph to the text dealing with printing of dive plans,
detailing the approach to print dive plans after they have been saved
in the Dive List. This is done at the end of the text dealing
with the dive planner.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Saving sorting state and apply the last sorting to new search results.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a search results are shown and the number of showed dives is
changed, all the dives are shown. We Just need to preview the first
number to show dives from the search results instead of all the dives.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rescale the dive profile view with page zooming in and out.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If I go to next dive on detailed view, and hit one extra right arrows
after reaching the last dive, first click on left does not change the
selection, only re-clicking on left does.
Fix the number of dives to prevent throwing exceptions and fix moving
between dives smoothly.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sac units is in l/min and not mm/min.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Event value is important in case of gas change and heading events.
The value information show: mix and direction.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
if dive notes don't exist, notes variable must be added to the
javascript containing empty value "--", this is more friendly than just
showing 'undefined'
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When no pressure samples are available the y-axis on right side gets a
bogus legend, this must be fixed and the minimum value is set to zero,
as there is no negative pressure value.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When clicking a tag in the detailed view a search must take place on the
following tag, the search settings must be specified to search for tags
only and ignore the advanced search settings chosen by the user.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The search result of a string consisting of separate words must be the
intersection of the search results of each word.
This way searching strings with spaces will be supported.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If export list only option is chosen, photos and dive status must not
be added to the export.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use QPicture to do that.
QPainter::drawPicture() requires offsetting the target QPoint's
Y value by two times the headingRow height.
This can be improved the hardcodding the offset when the
'pageIndexes' are calculated, but is a bit complicated.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the profile print, the number of dives per page is:
divesPerRow * divesPerColumn
If we have more 3, 0.6 seems optimal, while for less we can
pretty much use the default scale of 1.0.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QImage fix for the recently reported
"huge-vector-lines-in-PDF-printouts" bug is only needed on Linux.
For Win32 and OSx we can render to vector.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixing the font size is required, because we don't really support
a dynamic row height, as the row height is set in the class
constructor.
7 seems optimal for all print modes.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is wrong because we don't really need to scale. We already
have the estimated page dimentions in pixels, so taking the
quotient of the printer DPI and screen DPI and then scaling
(probably up) our rendered widgets via the QPainter introduces
blur (due to the oversampling), and a performance penalty.
By rendering at the exact dimensions we ensure that the widgets
are crisp at a 100% printout.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch updates the user manual in the following respects:
1) Add section dealing with modifying the categories of information
shown in the Dive List. (A figure added)
2) Add section on filtering the Dive Listfor a particulr sive site,
using Ctl-F.
3) Add section describing the addition of bookmarks
(a figure added)
4) Two sentences dealing with the 30-minute time limit for
including photos onto the dive profile (dives > 30min of
the dive are not shown).
5) A few small changes, mostly typos.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this option there is an exception, which makes the notes section of
the profile table occupy half the page. This way dive plans can reasonably
be printed.
Fixes#636
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We setup the startTime for the dive plan in too many places... but never
actually copied it into the planned dive.
Fixes#640
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sections 6 and 9.3 of the user manual has some problems with the
ascii-doc code for maintaining the prper alignment of subheadings.
This patch corrects the asciidoc markup code to solve this
problem
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Including a tiny change for one of the new strings to be consistent with
the capitalization rules we recently established.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least in some cases the maximum sample depth can be more than
recorded maximum depth on DivingLog XML export. Thus the maximum depth
is doubled for unit detection.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
qt 5.3, win7 64bit.
beginRemoveRows() asserts in removeSelectedPoints()
because rowCount() - 1, becomes less than firstRow.
This needs a check in removeSelectedPoints() if the number
of passed rows is zero.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the screen repopulate itself after a dive change only
one time instead of the old 4. we were repopulateing when we
removed the actual selection to reset the old selection previously
stored, sigh.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The text we generate for the diveplan has a table inside, and
we must use HTML only for the dive plan. so I treat all text
as HTML, look for a table item, if it doesn't have, I treat
it as Simple text and set it on the notes. Works and makes
linus loves me again.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simplifies so much of the code that we were using to control
the visibility of the HeartRate. now things are much saner.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This breaks compatibility with old preferences, but it's a single
key and not that very important so I don't think it's a bigger issue
I've renamed prefs.animation to prefs.animation_speed to denote
that it's a value, and not a state.
Also, fixed the places that were treating it as a state (on/off)
to treat it like a correct value.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The pictures were being plotted in print mode, the main
reason for this was that when we entered print mode and
had already a picture plotted, the method would return
before removing them from the screen. This fixes it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
for some reason we did a if(true) setValue(true) else serValue(false)
now we just use the value to set the value. =p
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All other default settings we get from subsurfacestartup.c's
initialization of the prefs struct. The planner had its defaults there
and in the retrieve of the settings from QSettings.
This changes so the defaults for planner settings will be read from the
defaults prefs struct as all other settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before this function was changed it was really supposed to just change a
gas that was passed in in case there was an event that changed the mix -
but with the new name the caller will assume that they get a valid gasmix.
And promptly we had one caller that didn't initialize gas to be based on
the first cylinder before calling get_gas_at_time().
Instead of adding yet one more spot that knows about the oddity of the old
API I simply changed get_gas_at_time() to do what it name appears to imply
and fixed the other callers not to bother to initialize the gasmix.
Fixes#647
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
