This class will handle the drag 'n drop "drag" part.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed so the list of items appear in a grid like view.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know that there is a QStringListModel, but that doesn't
have add and remove methods, and thus I cannot use it. ;)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This mostly cleans out stuff that is going to be uneeded.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oxygen should be representad by its own solid green colour not the yellow/green of nitrox.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a CCR dive is viewed and the toolbar button for PO2 is activated,
both the PO2 (green line) and the O2 setpoint (red line) are shown.
This allows evaluation of the PO2 in the CCR loop with respect to the
pre-configured O2 setpoint.
The setpoint graph can be disabled from the Preferences/Graphs tab
by checking the appropriate checkbox.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix various discrepancies in the capitalization format, as we are using
'down format' for titles and actions.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The accepting mode variable must be initialized to false to allow
editing of dive data.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Capitalize the word Facebook in 2 occurences in socialnetworks.cpp
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix small spelling error in configure dive computer dialog.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Ubuntu 14.04 the edit mode does not exit successfully when applying
the changes. It instead jumps back to edit mode (even though hiding the
option to apply/discard changes again). So let's just have a flag to
prevent faulty behavior.
Fixes#786
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Especially on Mac where there is already a lot of padding around the
action buttons.
Also made the spelling of the zeroMargins variable more consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If I want to use the names to make more sense out of the layouts, I might
as well name them correctly...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is highly dependent on the user, I guess. So I may be totally off
here. But the previous order was pretty much random (and even tried to
push one button in there twice in a row)...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of messing with the margin (which didn't work, anyway), we need to
set the size of the icons. Apparently on Linux this was implicitly done,
but on Mac it didn't scale the icons and provided space for the largest
one (and we have a couple that are twice as big as the others).
What we really need are scalable icons that allow us to set the icon size
relative to the font size. But for now this solves the ugliness on Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was silly; if we rely on this to be zero to indicate no change then
we better zero it out when we start editing.
Fixes#805
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A value of zero (which is the normal legacy one) remains "unknown", but
the divecomputer backend can now give both gasmix and cylinder number
this way.
Currently only the EON Steel backend does that, but it should be easy
enough to extend others too.
Also, fix the user-visible cylinder numbering in the cylinder change
tooltip to use a human-friendlier one-based numbering (ie first cylinder
is "cyl 1", not "cyl 0")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We zero out the displayedTrip and only copy changed data into it; so a
NULL value is not deleted text, it means there was no change.
Fixes#805
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops. That was supposed to do the opposite of what it ended up doing. The
goal was to NOT check for two weeks when the user updates to a new
version.
Instead it always checked when the user updated to a new version.
This mostly would hit developers...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code tried to look up the cylinder index from the Qt data models,
which was not only horribly confusing, but was also buggy. I think the
index ends up being off by one when the first cylinder change is hidden
(because it's at the beginning of the dive), but I can't make heads or
tails of that crazy code, so there might be something else going on.
Just remove all the crazy code, and use the event data directly. Which
gas the gasmix and the (potential) explicit cylinder index already.
It's much more straightforward, and it just automatically gets the right
end result whether some other event is hidden or not.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least on the Mac some objects appear to have generous default margins.
This creates a somewhat less wasteful layout. Still we have those massive
margins around the toolbar buttons.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The goal is to have things look as consistent as possible - so if some
elements have another nested level of layouts, their margins need to be
zero.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This time for the mainwindow.
This includes an adjustment in the C++ code where we actually referenced
one of those weird generic names.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that we set the margins everywhere, the manual corrections here aren't
needed. At the same time, the spacing for the labels looks better if it is
a tiny bit more generous.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The hard coded margins were random and inconsistent and generally ended up
with a rather unbalanced look. This was worse on Mac than on other
platforms, as there the margins get exaggerated for some reason.
This code is a bit of a hack and a bit brute force, but it seems to work
to create a much more pleasing appearance. It may need some fine tuning
(depending on OS or DE (under Linux)), but it definitely seems like a
massive improvement.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had two internal layouts, each of them using 6 of spacing,
wich accounted for 24 of spacing if we took into account
items side by side.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I can't remember why I decided to show the survey immediately if someone
was running a development version. Seems silly to me in retrospect.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Store the last version used, the next time we can check, and the decision
if the user does or does not want these checks in the settings.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Flat mean depth line (whole dive, not the instant one) is redundant as we now
have a much more useful mean depth graph.
Signed-off-by: Krzysztof Arentowicz <k.arentowicz@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As we already have running depth sum values for each sample
why don't just plot running average depth graph.
Signed-off-by: Krzysztof Arentowicz <k.arentowicz@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Avoid crash when moving mouse to left side of the plot when showing
mean depth
Signed-off-by: Krzysztof Arentowicz <k.arentowicz@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is in the form major.minor.subminor.commit_nr and makes it easy for
the backend process on the server to figure out what to do.
This changes the query argument from ver to version so the backend knows
that this is now a canonical version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unit selection is supported only for CSV exports, thus enabling the
selection only for those.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I wanna use some of it on the InstantMeanDepthLine
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can poke around data for the mean depth line.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class will hold the visible line of the mean depth for the time 'now'
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It was impossible to guess what this column was just by looking at it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was missing on the UI and it was really hard to guess what it was.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes sure the UserSurvey object is removed correctly by the qt
object tracking system.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 71dbcdc0d6 ("Added the option of opening User Survey form
explicitly") a define for not adding the user-survey was created.
This is quite unnecessary and this removes that option.
Based-on-patch-by: Nikhil Bharadwaj Gosala <nikhil.gosala@gmail.com>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We set the real tool-tips with setBtnToolTip from maintab.cpp, so this
is just duplicate and miss-leading.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We check that the logbook download didn't error out before checking if
we should remind the user to upgrade the firmware. Otherwise we will
check if whatever the current firmware version is, is greater than zero
and always remind the user to upgrade the fw.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The OSTC Sport exits bluetooth mode after the loogbook download. To
update the firmware in the OSTC Sport, we need it enabled again, so we
gently remind the user about doing that before continuing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Date and time needs to be a string, not a time_t.
Duration should be called that (and not time) and wasn't hooked up.
Also added a helper to get the duration string.
Finally reordered the components of the text that is shown to make it more
natural (or I should say, more in line with the order we use elsewhere).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This now is chosen directly from the popup box that appears when you try
to send a picture to facebook.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Generate the stub message that will go on the Facebook picture upload.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This dialog is used to choose what goes into the message of the profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we are sure that the upload was made in the correct folder.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move from the Dive List context menu to the Dive Info tab, it will only
appear when connected to Facebook.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This caused a crash when trying to call the firmware upgrade from the
downloader - no idea how this worked for the other caller (from the main
menu).
Anyway, with this the "offer to upgrade the OSTC after a download from an
OSTC that doesn't have the latest version" is indeed functional.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This successfully downloads the hex file.
The actuall update of the OSTC fails before it gets started with a crash
when the ConfigureDiveComputer object is created.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Heinrichs Weikamp is giving us stable URLs from which we can get the
latest stable version. The parsing is a bit simplistic, but it seems to
work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better parsing of the website data, a simpe dialog that informs the user
that they should upgrade their firmware.
Still doen't call the right code path to DO the upgrade.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This rearranges the code so we can call it from the download dialog and
tell the user if there is a newer version of the firmware available.
This needs a proper dialog and needs to be hooked up so that the user can
accept the suggestion and go directly to the firmware update code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is only partial. It prints the current version string (to be
processed by a regex) via qDebug().
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still only works for FB app admins at this time.
It always sends the dive that is shown in the profile.
It uses the resolution / size of the profile on screen.
It doesn't add any description and doesn't ask the user for explicit
permission to post (a preview would be even better with the ability to
edit the post).
But it's a great next step!
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And I had to create the Http header by hand because I couldn't
figure out how to do using HttpMultiPart from Qt.
not fun.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This increments the column number automatically when doing manual CSV
import. Counter is decreased when un-checking checkboxes, but that is
all the logic there currently is.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All Facebook related stuff now is on SocialNetworks.h/cpp
this makes it much easier to implement things and looking
for bugs.
working:
- logging in
- getting user id
- getting album id ( or creating it )
*much* more testing is needed, of course.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 6e72b5b8c5.
That broke the functionality to add elements to the tables in the planner
and the equipment tab.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We still need to do a lot of stuff on that part.
Currently when asking for sending a profile, it will just
create a private album.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a button to disconnect from facebook.
This clears the webview cookies so it correctly
disconnects us from facebook, and clears the
access token.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can now correctly connect to facebook endpoint. Nothing
really fancy at the moment. =/
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This piece of code allows subsurface to login with facebook
using the 'Subsurface' app created within facebook for secure
reasons. I'm the admin of it currently - but I'll pass it to
Dirk as well.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't want to waste space, but we don't want things to be too crammed
together, either. Especially not having horizontal margins for text can
look very awkward.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables the dormant OSTC3/OSTC Sport firmware update code, now when
the hw_ostc3_device_fwupdate call is available in libdivecomputer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to export all the details that someone might copy from a
paper logbook. We need a matching import template to make this simple.
This hasn't been well tested, I'm sure it will break when elements and
attributes are missing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code sets the parameters properly to support the new fields in
manual CSV import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables and disables the spinbox according to check box selection
for new fields in manual CSV import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds fields for cylinder and temperature information on the
importing dialog.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes unused strings from ui files. These showed up for
translation and are quite meaningless to translate.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a destructor for ProfileWidget2 that deletetes its new'ed
objects on exit.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After we created a QString from it, we need to free the char*.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As per the suggestion by Dirk Hohndel, I changed the "Type of Diver" from
RadioButton to Checkbox.
The User Survey UI was not clear earlier, so I grouped the similar options under
a question. I also modified the language and re-arranged the visual components.
Earlier, the user could choose contradicting import types at once. This has beencorrected by using RadioButtons instead of CheckBoxes.
Signed-off-by : Nikhil Bharadwaj Gosala <nikhil.gosala@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The UI in the User Survey page was not clear and the Text Blocks were getting
cut. So I increased the size of the Text Blocks.
Also the survey was using CheckBoxes instead of RadioButtons. The problem with
this is that the user could choose to be both Recreational and Technical diver
which cannot be possible. So I replaced the CheckBoxes with RadioButtons.
I also replaced the CheckBoxes, which asked the user from where he was importing data, with RadioButtons so that the user can select only one option.
I also modified the English used and made it concise and clear.
Signed-off by : Nikhil Bharadwaj Gosala <nikhil.gosala@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Earlier, there was no option for the user to explicitly open the User
Survey form. This has been corrected by placing an option in the "Help"
menu by which the user can explicity open the User Survey form.
Signed-off-by: Nikhil Bharadwaj Gosala <nikhil.gosala@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since replotting is expensive and it is triggered while scrolling
through the list of cylinders, better not do it for improved
user experience and replot only after the combo box loses
focus.
I hope this...
Fixes#768
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
<marble/MarbleDebug.h> is not availaible in all Marble versions.
As Marble::MarbleDebug::setEnabled(verbose) is only used when
MARBLE_SUBSURFACE_BRANCH is defined, also include header file only when
MARBLE_SUBSURFACE_BRANCH is set.
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Manually inserting set-point changes at negative times (left
of the profile) caused the setpoint to end up at stupid values
(probably some signed/unsigned confusion). This patch aligns
them with the start of the dive.
Fixes#774
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calling Subsurface with -v now gets you debug output. Of course, with a
regular "release" build of Marble you still won't see much. But with the
changes in the special Subsurface-testing branch you actually get some
very useful information when debugging a lack of maps in Marble.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Depending on the options shown, the latest change appears to have moved
the temperature graph a bit too low. This seems to work better in my
experiments.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This micro patch adds the ability to sort the lists alphabetically
for user interaction. Dirk asked me to do this for location, but
this actually changes for location, divemaster, buddy and suit.
Seems a good thing for all.
Fixes#780
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When opening the filter dialog we allow the user to filter the choices
that are shown. The text that they enter in that filter for filter
criteria should be treated as case insensitive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No idea why this code was there... but what it caused was an invalid
access to checkState[-1] when a dive had that first tag. This explains why
sometimes the dives that had that tag were shown, regardless of whether
the selected filter criteria should have excluded them or not.
Fixes#769
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The successful message was emitted in a some what older way then the
other messages so it was always emitted, even on error.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the code so we include all the cylinders from a previous
dive when we re-plain a dive.
Otherwise we would have a hole in the cylinders table when we plan a
dive based on a dive where we have unused cylinders, and it makes more
sense to copy all of them rather than not.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A profiler session in the planner shows that for deep long dives
a significant amount of CPU time is spent in populate_pressure_information()
which interpolates the cylinder pressure graphs.
This patch introduces a "fast" flag for the replot of the profile
which is active while the mouse button is still pressed and that
suppresses this calculation.
In the future, this flag could be used for other responsiveness tunings
of the plot.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a context menu entry to add a setpoint change
event. In particular, this can be used to turn a logged dive into
a CCR dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows more space between the input fields in the dialog.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Date and duration formats are not necessarily self explanatory so adding
tooltips to explain the expected format.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For each polygon that we paint we have to step through the
plot_info from the start again.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before you could 'Cancel' the edit and then would be asked if you wanted
to 'Discard' your changes or 'Cancel'. So clicking 'Cancel' cancelled the
action of having clicked 'Cancel'. That's so confusing, it's even hard to
explain. Yes, it uses "typical" language for user interaction and kind of
makes sense, but it's not easy to understand for the non-technical user.
With the new labels the user is asked to whether they want to 'Apply' the
changes or 'Discard' them. And when they choose 'Discard' the verification
question is still 'Discard' or 'Cancel'. That seems much more consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If not cylinder with type DILUENT or OXYGEN is defined, this function
returns -1 which should not be used as an index to an array. This
patch adds code to check for this return value and exit gracefully.
On line I marked with a comment. Someone more knowledgeable of that part of
code than me should double check that return is here what we want.
[Dirk Hohndel: fixed small oversight...]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clearly the static dialogs don't work. Even with the previous commit the
dialog still said "Save" insted of "Open". So let's just assemble our own
dialog and be done with it. I hope I got all the options right...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using the SaveFile dialog to open a file caused it to ask the user if they
wanted to overwrite a file when they actually tried to open an existing
file. This fixes that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can specify file names that don't exist and therefore make our
git syntax (/path/to/dir[branch]) work.
Thanks to Tomaz for pointing this out.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a title bar with close button.
Set an appropriate title.
Centred the window relative to mainwindow.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code sets up the UI that will allow the user to adjust tank pressures
at a gaschange event. The actual changing of the pressure is not
implemented, yet, so this is disabled until someone finds time to do so.
The scenario is this: a tec diver or sidemount diver without pressure
sensors on at least one of their tanks still wants to reasonably
accurately track gas consumption during a dive. The diver takes notes of
the pressures at every tank switch (I find that odd, but apparently some
cave divers indeed do that as they switch back and forth between different
gases) and then wants to adjust the pressures in Subsurface to match those
written down.
One difficulty here is that the first and last pressure of a tank with no
sensor data is still considered "sensor pressure" - this is basically an
implementation detail in the code that is used to do the pressure
interpolation to have constant-SAC pressure plots for tanks without
sensors. So when we check if there is indeed no pressure data available at
the gas change, we can't just work with the interpolated pressure - if
this is the first (or last) time the tank was used, that pressure may be
marked as sensor pressure.
What's missing is the UI to enter the desired new pressure plus the black
magic that actually inserts this into the dive in a way that doesn't break
the assumptions in the rest of the code. I'm running out of time to do
that but wanted to preserve this code so someone can continue this later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had the variable. As a pointer. Which we used memset to clear. Ouch -
that smells like some bad cut and paste.
With this change the object keeps the corresponding plotInfo around (just
like some others do) and can use it later. I suspect this code could use
some larger cleanup, but it's a bit too late for this in the development
cycle, I guess. I'm sure I'll regret this in the future...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the context menu of the profile it makes no sense to offer the ability
to switch gases unless there is a gas to switch to.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only place where I'm not sure if there are unintended sideeffects of
changing over to the new domain is QCoreApplication::setOrganizationDomain
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt by default uses a rather simplistic text heuristic to figure out if a
menu entry is one of the special ones that need to be moved into the
application menu (About, Preferences, Quit - but for Preferences anything
that matches settings, options, config is used as well).
This patch tells Qt to keep its hands off the the DC configuration entry
in the menu.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
RulerNodeItem2::recalculate() does something which is
apparently not a good idea in combination with
RulerNodeItem2::mouseMoveEvent().
Each time the mouse moves, setPos() is called. Then in
recalculate() the x() value is checked and if less than 0
it's changed to x = 0 (setPos(0, y());).
This last call (setPos(0, y());)
however does not work and the value remains less than zero
leaving one of the ruler points outside of the graph.
To solve the issue we add a silly explicit check if x() < 0
before calling setPos() in RulerNodeItem2::mouseMoveEvent().
The 'x() > timeAxis->posAtValue(data->sec)' strangely works
on the other hand.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Extend the tooltips to be shown both on the labels and the values and add
tooltips for all min/avg/max elements.
To avoid confusion when only one dive is selected, no longer show min SAC
or max SAC or min duration or max duration.
Fixes#694
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the unused upper widget, set a somewhat random but at least more
reasonable default size and finally support Ctrl-W and Ctrl-Q shortcuts.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also fixes a bug in the diluent pressure interpolation
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Maybe it would be better to just copy the whole structure and then clear
the things we don't want to copy? This seems fragile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We copied the string pointers instead of copying the strings. Once those
got freed, things went downhill.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
--047d7b8737f87ede8e050803e6b2
Content-Type: text/plain; charset=UTF-8
<div dir="ltr"><br></div>
From 3db4a422485374801ca2f6233ec23b8671a8656d Mon Sep 17 00:00:00 2001
From: Tomaz Canabrava <tomaz.canabrava@intel.com>
Date: Sun, 16 Nov 2014 23:22:58 -0200
Subject: [PATCH] fix 727 - position correctly the popup.
When the user entered a tag and that made the message box display
the popup with the possible choices was still in the old position
hidding the line edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The MultiFilter itself should walk the dives in a trip. This way the logic
(OR within a category, but AND between categories) is correctly applied
and the flags in the dives are set correctly (which makes the overall
counts for dives filtered work correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the text easier to translate (and more meaningful).
Also modifies its position to be centereed in order to look less "squeezed
into the corner".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But the filter count seems to be broken for some reason and
I really don't know why. It seems to work for tags, but
not for everything else.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
as we load dives and dives, new DiveEvents will be created
but the transparent pixmap never deleted, also this makes
the transparent pixmap only for the correct event, not for
all of them.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some dive computers appear to have heading data in every sample. In order
to avoid a completely cluttered dive profile we no longer show a flag for
every heading event but instead show a basically transparent pixmap (which
is invisible to the user) that allows us to report the heading information
in the tooltip but leaves the profile uncluttered.
Fixes#586
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the .txt to the list of all dive log files as this is the file we
expect to be opened for Poseidon Mk6 log files.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems like QMarginsF and QPageLayout were added quite
recently - in Qt5.3!
We attempt to support older versions by using something
found in the Qt4.7 documentation.
Patch also fixes small ordering issue where top / left
margins were swapped.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All the print options will be stored after the user closes
or "cancels" the print dialog.
There seems to be no good way to store the last
selected page size, because print dialogs are different and
some just list them as strings - A4, A3, etc.
The patch also applies the following changes:
- renames display.h's 'struct options' to 'struct print_options'
as these were really just for the print dialog
- the print_options dialog now stores more options as 'bool'
- demote PrintDialog's 'printOptions' to 'private'
Fixes#653
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is no longer just a tag filter. Also, since we use this entry (and
its shortcut) like a toggle we should mark the menu entry accordingly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the last of the series of Macros that I'll do to ease
the creation of a QStringListModel based filter.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
New method to simplify the creation of 4 of the common
methods for each filter in an easy way. There are
a few other methods that I'm also thinking on how
to do this.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
samething as the other commits, use common code.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The setData of any filter based on a StringList with
checkboxes should be the same, so let's use the same
codebase for it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just to simplify the creation of more filters.
more macros will be used, because I tend to abuse them.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We already have a bunch of filters, let's pack them together
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Depth is often mentioned in a length unit, but what we care about is
pressure. When diving in fresh water the pressure is lower than the same
depth in salt water. This adds support for using different salinities in
planning.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By popular demand, this changes the names of the Suunto Safety levels.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way other parts of the code can act on the "hidden_by_filter" state.
This also cleans up the way we track if a dive is hidden - do it in the
multi filter instead of the individual filters.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Code to clean the filters. Maybe I'll also need to call this upon
closing the dialog?
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
clicking on the close button will close the widget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Buttons to close, minimize and clear were added. We need better icons.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
a bit of extra spacing was necessary to get rid of the scrollbar.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The extra info didn't had a Layout set, this makes the
design hard and not resizable. fixed by using a layout.
I also changed a ScrollArea for a GroupBox, since the
Model already has a ScrollArea.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The .location and .notes fields can end up being NULL,
in which case copy_string() is safer.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a rather brute force implementation. It might be worth while
caching this information - but I'd like to do some benchmarking, first.
Sadly this code also shows that there are some bugs hidden in the
selection code when filtering is present. When a trip is selected all
dives in the trip get selected, even those that are not visible under the
current filter.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
ppO2 represented with 2 as subscript.
Special l symbol for litres.
Capitalisation to bring in line with existing style.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Spelling fix for ampoea
Remove bogus HTML string from UI file
And fix the translation sources accordingly
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And added a missing liquivision item in file open dialog.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Try really hard to ensure there remains a valid selection. Only if none of
the dives are selectable should we give up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we end up trying to restore the selection where the selected dive is no
longer visible (i.e., it's now filtered away), this code caused a crash by
falling first() on an empty list. Let's not do that.
Fixes#758
c++ have some idea about in what order things should be initialized.
This makes us comply with that order.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The buddy list generated by the buddy tag logic gets separated by
,<space> so this trims away any leading spaces from the buddy name.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way any extra data probided by the dive computer is visible to the
user (without other processing). This data cannot be edited by the user as
it reflects the information given by the dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While in a multi dive edit we want to apply our usual semantics (only edit
things that are the same as in the current dive), when doing an explicit
copy and paste that doesn't seem to make sense. So we manually override
that behavior.
Fixes#753
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we only applied the type of tank (description, volume, working
pressure) to all selected dives where the tank description matched.
With this patch we also copy the gas mix into all matching cylinders.
Additionally this addresses the issue that we should have a separate copy
of the cylinder description string for each dive.
Fixes#754
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When replannig a dive, offer another button that creates a new
dive rather than overwriting the old. This should help in creating
several versions of a planned dive (longer/shorter, deeper/shallower
etc). Note that this makes dives that start at the same time not
influcence each other's deco.
Also, only the first of a row of simultaneous dives contributes to
the tissue loadings of later dives.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems, on Linux qrgba does not work properly making
stars with alpha red when selected. So the patch returns
to just rgb without transparency but decreases the contrast
to white by a factor of 5.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oddly Qt left the trips selected (but all dives where unselected in the
UI). This got our internal state rather confused. With this change we
clean up that mess and go back to just having those dives that were
originally selected and are still visible show up as selected.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only dives that remain visible stay selected. And if all selected dives
are removed by the filter, pick a new selected dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As my wife kept pointing out for a long time, the greyed out stars
were heavier as images than the yellow selected stars. This patch
makes the grey stars semi-transparent.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Acked-by: Andrea Fischer-Helling <andrea@fraufischer.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed to get the correct maxdepth when replanning
leads to a shallower dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing tanks we triggered a replot - but that overwrote the
displayed_dive with the current_dive before the remaining data from the
displayed_dive was used to edit the current_dive.
So now we delay this until later in the function, this way copy of paste
of both tanks and weights works.
Fixes#753
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hunting down a different issue I managed to cause a crash here when trying
to copy a string that ended up being NULL.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tool tip not needed, text already provided on mouse-over
Corrects captitalisation style
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use 2 subscript on ppO2
Adhere to agreed capitalisation style
Reset instead of resetted
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we only store things in the preferences if they are different from
the default, the existing code that simply compared with the settings
value didn't work when people used the defaults.
We now compare to the actual preference at runtime which should address
that.
Fixes#731
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
forgot to add that we used multiselection when I recreated
the dive list.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Multiple layouts had the same name="gridLayout_3". Fix by shifting all
the numbers up by 1.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I was comparing the strings in the opposite direction.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just the skeleton of the functions, nothing working yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The multifilter widget is a container with all the filter
widgets inside of it. currently there's just one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It was impossible to remove the tag filter after opening it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Disable the possibility to collapse the pannel in the
mainwindow when seeing everything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch moves the filter from the collapsable pannel
and puts it in an uncollapsable way above the dive list.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Yikes this was stupid. We mixed changing the displayed_dive and the
current_dive. So we'd pass in the displayed_dive and a pointer to the
dive_computer structure of the current dc in the current dive. Oops.
This makes much more sense. And:
Fixes#738
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We forgot to clear out the pre-existing tags. We did this for the actual
selected dives that were being edited, but not for the displayed_dive, so
deleted tags showed up again on screen (even though they were correctly
deleted from the selected dives in the dive list).
Fixes#732
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit d5f19c43c9.
With the changes to the headers in commit 3515ad71c1 ("Divelist: remove
units from header, add tooltip") I think this isn't needed anymore and
actually reverting it creates a cleaner look.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The whole "duration in seconds" is being way too OCD about the
information, and just makes it harder to read.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Without this I was only able to close it by choosing to print.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should help with the issues we are having with alignment / visibility
of the relevant information in the divelist.
Most people will never switch the units (or maybe switch them once, the
first time they use Subsurface). So having the units shown in the table
header quickly becomes redundant - yet having the units in there causes
all kinds of layout issues.
This patch adds a tooltip to both the header and the main data area of the
divelist. The tooltip shows the column name plus unit and the column
header no longer shows the units.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When entering a gas switch manually, explicitly show the different tanks
that are available and correctly switch between different tanks with the
same gas.
See #702
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of the 30 second heuristic we only assume that this is an explicit
first gas if the event coincides the first sample.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevented import of log files other than CSV and TXT.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface can now open CAN files as an alternative to importing.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This isn't Cobalt specific, this is specific to dive computers that
indicate the first tank that's in use with a gaschange event that
coincides with the first sample.
We need to make sure that we suppress showing that gas change event
(regardless which cylinder it goes to) and instead set the correct
cylinder index from the very start of the dive.
This works with the test data I have and doesn't seem to break thing with
any of the files that I tried... but I'm worried that this is not the
right way to do things.
Fixes#742
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents a warning caused by -Waddress, that the address
of 'displayed_dive' will always be defined.
Exact macro variant suggested by Dirk.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will parse date information from Seabear log file and skips the
"header" data to allow parsing of the CSV content.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a delegate to simplify the handling of gas components and
the change depth.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a delegate for the type column to choose the type value for
gases that is less confusing then the raw value.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I fixed up the decode and finished the parse for Cochran EMC, Commander
and Gemini computers. I suspect that this code may only work with files
from certain versions of Cochran Analyst. It works with my own CAN files
and with the samples that came with Analyst v4.01v.
A seemingly arbitrary offset of 0x4914 is needed to access data.
The previous code uses 0x4a14 and 0x4b14. I suspect these are from
different version of Analyst.
[Dirk Hohndel: whitespace cleanup, add files to subsurface.pro, made sure
this compiles without the corresponding patch to
libdivecomputer (that isn't upstream, yet), cleaned up the
usage of structs, removed a few unused variables]
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On the OSTC's the salinity is in kg/l and is stored as kg/l * 100
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The OSTC supports a bit different functionalities than the OSTC3 does.
The "unsupported" bits are
setBrightness
setCalibrationGas
setCompassGain
setDiveMode - Bult into setDecoType (OC/CCR)
setDiveModeColor - Lots of different colors
setFlipScreen
setLanguage - Controlled via flashing different firmwares
setPressureSensorOffset
setUnits
setSetPointFallback
setCcrMode - there are some ppO2 reading functionality in the fist gen
OSTC that we don't care about, and the rest is controlled
via choosing a CCR deco algorithm
Also the OSTC have a notion of number of dives it has done, so this adds
ui for that value.
There are also differences in how some values are handled. Ex the OSTC
don't have fixed samplerates that you can choose between. You can rather
just set your sample rate to X seconds.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The problem that we were comparing signed and unsigned ints was originally
found by Lubomir. As image times can be negative (and the comparison should
fail in that case) we need to compared them as signed.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Acked-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The icon comes from heinrichsweikamp.com, the same as the ostc3.png did.
I've emailed with Matthias Heinrichs at HW and they have given us
permission to use both the ostc3.png and ostc2n.png under the GPL v2.
They also can provide the hi-res originals if anyone needs to do more
work on these icons.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now include the Ui header file, so we can remove the forward
declaration.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The device supports a up to 60 chars custom text. This limits the
LineEdit to that amount, so users see when they reach the max limit.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a shortcut, Ctrl+Shift+C to jump into the Configure dive computer
dialog.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit a85a219df3 ("Add ability to replan a dive that we planned
before") I completely mishandled the saving of the replanned data.
How embarrassing.
Fixes#747
See #527
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DiveLogExportDialog::export_depths()
We set a default value of 'unit' which will silence the warning itself.
Then hope that the compiler will respect the argument order i.e. call
get_depth_units() (which sets 'unit') before using *unit as the last
argument passsed to put_format().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"gridLayout_1" is used twice. Re-order the grid layouts as 1, 2, 3.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MainWindow::on_actionReplanDive_triggered():
If a dive in the divelist does not have a "DC Model" for some reason,
selecting "re-plan" from the menu will pass a NULL value
current_dive->dc.model to strcmp() and break before the debug output.
To fix that we check if the said .model value is NULL.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds support for importing the logs from a Poseidon MK6
rebreather. This DC produces logs that contain of a .txt file that has
all the meta data and a .csv file that contains the sample readings. The
CSV file is different from the others in that it has a line per each
sample reading at given time. Thus we have to merge all the lines from
one point in time into one sample reading of ours.
[Dirk Hohndel: addressed some compiler warnings]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When dropping to the bottom in plan (and add) mode, the gas label was
placed along the diagonal line from (0,0) to the second dive data point
(i.e. the one at the end of the "at deptch" segment). That looks terrible,
the label needs to be along the segment that we are spending at the
bottom.
This patch fixes that problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a icon to the Vyper config page. The image is taken by me of
my Suunto Vyper. Thats the reason for the quality.
Question: Would it be ok to grab a PR image from Suunto's web page to
use here? If so they got better ones...
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We currently don't support update firmware for the OSTC3. Where waiting
for support in libdivecomputer for that, so disable that button for now.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Working on HTML exports to support imperial and metric units and also
custom selected units based on subsurface preferences.
User selected units is exported to settings file that will be mainly used
by listlib javascript file.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The pre-existing tissue load going into a dive can change if the start
time of a dive changes. Therefore we need to recalculate the ceiling when
editing start time (or date) of a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the existing code worked fine for editing that start date or time of
dives downloaded from a dive computer or imported from some other source,
for manually entered dives this did not work and the date or time was
always reset to the original time once the changes were saved.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ensure that there is no (clipped) overflowfrom the header.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous hard-coded solution for GTK+ didn't work on HiDPI, and a
comment hinted that even on Mac OS X it might need tuning. Find a more
generic solution that should work regardless of platform and style,
based purely on the geometries reported by the style itself.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also, generate the corresponding pixmap only once, and distribute it to
all models that need it.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The latest CCR patches had rendered the planner not usable for CCR dives.
This patch corrects this (and reenables the CCR set point column for
segments). The problem was that a new member setpoint of struct divepoint
had been introduced, but there was already po2 which had the same meaning.
This patch merges the two and renames them setpoint to prevent future
confusion.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the settings not previously available in the OSTC3 settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a Advanced settings page for the OSTC3 and moves the deco
settings off to that page.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These settings are gas related so they fitted in the spare space in the
gas screen.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I hope this time I got it right. basically, the old code
tried to guess where the plus icon should be with a fairly
bad set of defauults.
This one patch asks for the Qt style where everything is and
uses that knowledge to make it be in a more sane position.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Giuseppe Bilotta <giuseppe.bilota@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Collect font, font metrics and icon size functions in a separate module.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Compute the default widths for the columns in the dive trip list from
their header and (expected) content length rather than some fixed pixel
sizes.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't hard-code column widths or icon sizes/positions. Instead, compute
them from the fonts used.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of hard-coding the icon sizes and spacing, compute them from the
font sizes, that Qt auto-computes from the displya DPI.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default IMG_SIZE and SPACING in the StarWidget are not appropriate
for HiDPI displays. Replace them with StarMetrics which are
auto-computed from the (default) font size (which Qt determines from the
display DPI settings).
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The type is now a double. It was a int during development, but due to
the feet/128 precision i changed it to a Double, but the default value
wasn't changed type on.
All the Qt tools swallowed the number there without complaining but the
Qt designer insisted on changing it to a double.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The fist column is the O2% value, and was handled like that in the data.
It was only the column header that was wrong.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Almost all of our other classes have the ui class as a class member in
the controller code. This switches ConfigureDiveComputerDialog to that
model.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Disable the Update Firmware button if you choose a device that we don't
support update firmware for.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't allow creation of backup files or writes to the computer before we
know we got some data, either from a backup file or from the actual
device.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default max value for a QSpinBox is 99. The default Saturation
factor for the OSTC3 is 110%. This code sets the max, min and default
values on those spinboxes.
The values comes from me reading the assembler code for the OSTC3.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default max value for a QSpinBox is 99. The default Saturation
factor for the OSTC3 is 110%. This code raises the max values to 255
which is as far as i've read the ostc3_interface.odt the max value.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is still missing lots of values which are now set to 0 with rather
unfortunate consequences (for example, setting Saturation and Desaturation
to 0 turns off the NDL / Deco calculations). So this code right now is
quite broken.
But at least this fixes the reported crash and gets some valid data
initialized.
Fixes#744
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code connects up the configuration ui with the backing
data structures thats gets read/written to/from the devices.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This builds up a ui to use for all the settings for the Suunto Vyper
family devices. Some of the fields are pure information, eg, max depth
and number of dives, so they are marked read-only.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Decode the gasmix data into a sane format when creating the event, and
add the (currently unused) ability to specify a gas change to a
particular cylinder rather than (or in addition to) the gasmix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not only does it make it look more like the libdivecomputer downloaders,
but the uemis downloader needs it in order to support all the flags we
have. Notably "download into private trip".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds an option to the export dialog to write an ascii file containing
filenames of image files a tab and the depth at the time of the image
taken.
[Dirk Hohndel: whitespace cleanup]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The setpoints filled in into the ui where never set on the devicedetails
object so they where never propagated to backup or write settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When multiple graphs are displayed at the same time they end up being printed on top of each other.
Scale the lowest graph to accommodate the tankbar.
Add an intermediate scaling step to the depth axis when pp graphs or the tissue graph are visible.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This new version of the TagFilterSortModel actually accepts
*any* new MultiFilterInterface.
So, how to use it to create a new filter:
Implement a class that inherits from MultiFilterInterface
Implement the filterRow method
TagFilterSortModel::instance->add( myClass );
and you are done.
[Dirk Hohndel: removed some debug code and did whitespace cleanup]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A small typo broke the disabling of the graphs for the
newly added curves. ( btw, we need a designer to display
the graphs in a better way, just too much information. )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes a bit of the logic used. Now we show every
dive if nothing is chedked.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a graphical representation of tissue loadings at the current moment during the dive
to the tooltip box. The layout is inspired by the Sherwater Petrel.Add tissue saturation plot to tooltip
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a toolbox icon to turn on a tissue plot inspired by the bar
graph of the Sherwater Petrel,
It shows the inert gas partial pressures for individual compartments. If
they are below the ambient pressure (grey line) they are shown in units of
the ambient pressure, if they are above, the excess is shown as a
percentage of the allowed overpressure for plain Buehlmann. So it has the
same units as a gradient factor. Thus also the a gradient factor line (for
the current depth) is shown.
The different tissues get different colors, greener for the faster ones and bluer
for the slower ones.
Positioning and on/off icon action still need some tender loving care.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some columns in the dive list makes more sense to have right aligned
than left aligned. This switches the numeric columns to right alignment
so they is more easily compared visually.
But, we keep the NR-column left-aligned because we use its left
indentation as dive-in-a-trip marker.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes two typos found by lintian.
I guess a bunch of translations will need to be updated or something, I am not
sure how they work so I didn't touch them. I presume in the worst case they
will need to be re-translated at the next iteration
--
Salvo Tomaselli
"Io non mi sento obbligato a credere che lo stesso Dio che ci ha dotato di
senso, ragione ed intelletto intendesse che noi ne facessimo a meno."
-- Galileo Galilei
http://ltworf.github.io/ltworf/
From a0e5f48349557fcccd82ba8c7555043de140835c Mon Sep 17 00:00:00 2001
From: Salvo 'LtWorf' Tomaselli <tiposchi@tiscali.it>
Signed-off-by: Salvo 'LtWorf' Tomaselli <tiposchi@tiscali.it>
Date: Fri, 12 Sep 2014 18:25:20 +0200
Subject: [PATCH] Fix typos reported by lintian
Fixes two typos reported by lintian.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch introduces a new structure holding partial pressures (doubles in bar) for
all three gases and a helper function to compute them from gasmix (which holds fractions)
and ambient pressure. Currentlty this works for OC and CCR, to be extended later to PSCR.
Currently the dive_comp_type argument is unused.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a maxcnsText widget under infoTab and populates it.
Note that I manually edited maintab.ui to display CNS and OTU
next to each other and right after gas data.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
New rules for them, a new item on the model with the text
"Empty Tags" should be marked if the user wants it to be
displayed.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Trips will be filtered if it doesn't find any tags for
dives.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch correctly filter dives based on tags, but it will
also keep showing all the empty trips.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This method should remove a row on the dive list model
visualization if none of the tags that it have are marked
as 'visible'.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model accepts check / unchedk. Now, I need to also
plug the result of the check / uncheck to the list model.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Place the TagWidget on the correct place on the main window.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was declared on a class definition, but never implemented.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just the ui file and a empty class to start playing with it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Application's default lang is US english, translation to
UK spelling should be done in transifex.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sets text strings to follow the style of existing UI components in use of
capitalisation and use of :
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive computer configuration dialog was a bit cluttered. This
change adds a tabbed interface separating the basic settings from
the gas, dilutent and set point settings
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commits a24eb8ac12 and 0b0860d24a introduced a nasty hack that was
needed back then to make tank and weight selection work on the Mac. But it
caused other unpleasant issues (as mentioned in the commit messages).
I re-tested this with the current Qt5.3 based builds on Mac and this hack
is no longer needed.
Fixes#638
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These are actually javascript files containing js objects and not json
files.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out that the mainwindow reads the settings and sets up things -
except that this has already happened in the constructor of the static
PreferencesDialog. So only keep those parts that aren't handled there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to get rid of the old default font on Windows (Calibri) we are
going to near ridiculous length. The reason for this is that we in the
past always saved the default font in the settings (how stupid was that!)
and so now even with a new default font in place, since there is an
explicit font in the settings we take that instead of the default.
Instead of requiring our existing users to use a registry cleaner to get
the correct default font on Windows 7 and later (the VAST majority of our
Windows users at this stage), we simply explicitly ignore that old default
font.
There is one very nasty side effect. A user cannot set Calibri as their
font of choice on Windows 7 or later (because we always force them back
onto Segoe). Given how much nicer Segoe looks I think this is an
acceptable flaw - let's hope this doesn't come back to bite me in the
future.
At the same time this changes the default font size handling. We try to
get the default font size of the OS so the app looks "right". This seems
to not give me the expected result on Linux with KDE, but maybe I'm doing
it wrong? Looks good when testing on Windows.
See #712
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Similar change to the dive list. The idea is to not save things that are
the default. This way Subsurface will do the right thing when defaults
change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an elegant way around our problem with people who have the
horrible old "100px" column width in their settings. The first time they
run Subsurface after this fix things won't get better, but the offending
keys will be deleted at exit. And the second time they run, they'll get
the much more sensible new default widths.
Thanks to Thiago for this idea.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to start out with valid SAC rates in the diveplan.
Thanks to Gaetan for finding this and suggesting a different fix - this
seems cleaner to me.
Reported-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The webservice backend sends responses in English. Let's do a better job
presenting those in the users preferred language.
Fixes#714
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The modelDataChanged method will remove all items and recreate everything
*right* now we will never use it, because we are not triggering any
changes on the model, but simply deleting and recreating it everytime
we open the dialog. to be changed in the future.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When there's a rowsAboutToBeRemoevd, remove all items from
the scene() by calling scene()->clear(), instead of creating
a method just for that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we used removed things from the interface we could hit a dangling
pointer, so first delete the items, then let the system delete the rows.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Connects the YearlyStatistics model with the YearlyStatisticsWidget
nothing is shown right now, mostly because I need to do everything
but now it's easyer to add the things that are missing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the old statistics panel at the botton of the new one to have
a reference view of the statistics while programming the new one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to have a very sad way of controlling the statistics,
now we will create the model when there's a need for it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The statistics widget is a beast, one of the parts that I dislike most
on the current subsurface implementation. This is the initial work to
change that to something amazing. This first commit adds the first bunch
of files that I think are needed, and the correct setup for the qmake and
cmake buildsystems.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we can't edit the trip date, we need to remember to
re-enable it after we disable it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using QToolBar I was able to remove much of the dead code
from the mainwindow.ui xml file by transforming the QToolButtons
into actions and loading them dynamically in the .cpp code.
I couldn't use the designer for this ( as I wanted ) because
Qt has no notion of ToolBars outside of the areas where the
MainWindow should have one, and we use it in a very different
area.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Basically we could end up in a situation where the plotInfo is no longer
valid, yet the model changes and triggers a redraw before the new data is
passed into the TankBar.
Instead of chasing that race condition it seemed much easier to just copy
the plot_data entries and the gas information in the dive.
Fixes#716
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And move the units there.
This is a long going back and forth. What we want is narrow columns. But
what we need is something that's easy to understand for our users.
I'm open to other suggestions, but I think this moves us in the right
direction.
See #712
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was an interesting bug. When adding a dive that would end up in the
middle of the dive list, the newest dive in the dive list would end up
marked in the dive structure as selected - even though it wasn't
visualized as selected by Qt. Bad things happen if the user then made
changes to that dive without selecting something else first, for example
by either editing the dive or doing things to it like removing it from or
adding it to a trip. The same operation would also be applied to the
newest dive in the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to offer a simple way to remove a calculated deco, if Control is pressed
while clicking on the trash can in the dive plan, that point and all following are
removed. This way the user can Ctrl-click on the first calculated waypoint.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user right clicks the globe, we should only present the menu action
if there's a current dive, if not, we disable it.
Signed-off-by: Karina Mochetti <karina.mochetti@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code seemed way complicated, made way too many assumptions
and apparently was broken in certain cases.
This code seems very simple, looks correct and should fail gracefully
(i.e. simply do nothing) if things get confused.
Fixes#706
(I hope)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When backing up dive computer settings to XML, the confirmation
dialog shows the default file path. This patch fixes that by
displaying the correct file if the user changes the backup location.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This worked flawlessly on Mac and Linux, but on Windows I needed to add
the explicit setVisible here - not quite sure why.
Fixes#710
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we only plan OC dives, so let's not confuse things by showing the
set point for the tank.
Fixes#261
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out that the fix in commit f7119bdccf ("Planner: make sure no old
handles are around when entering Add/Plan") was incorrect. We ONLY want to
remove the existing handlers when we re-plan a dive, NOT when we call add
or plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is subtle. The modifications to the selection cause a redraw of the
profile. So we need to make sure that we leave the plan state and return
to profile state BEFORE we do this, otherwise we'll call into
createTemporaryPlan() with invalid data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this information, when we re-plan a dive we can bring the user right
back to the point where they ended - they have the waypoints in the dive
pointes table and handles are shown on the right points in the profile -
and the rest of the dive is once again calculated by the planning
algorithm.
For now this state is lost when saving the dive file as we don't add this
flag in the sample to our saved files. So if we don't find any samples
marked as manually added we add ALL of the samples as way points on the
diveplan and the user has to manually remove the ones that were
calculated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some cases we don't appear to remove all of the old handles from the
scene and end up showing a handle from a previous instance of the planner
in the upper right corner of the profile.
This patch makes sure that we remove any stray handles that might still be
around before entereing plan or add mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While planning we might have made changes to the displayed_dive. So we
need to make sure that the profile is redrawn after we cancel a plan (or a
re-plan).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When doing this, all waypoints of the calculated ascent are now waypoints
in the plan - so the user has to remove the ascent part of the dive in
order to really replan the dive. That's a pain, but we don't keep the data
around that would tell us which waypoints are user input and which ones
were calculated.
Fixes#527
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's silly to carefully calculate our ascent for each new waypoint that we
add to the plan. Let's get them all in and THEN calculate an ascent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply setting the pointer to NULL leaks memory.
And that C++ recursive two function implementation... oh boy.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old implementation was... let's call it creative.
This tries to actually get things right instead of using magic.
Don't pretend that double values are ints.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the same logic as we do for newly added dives.
As a side effect this patch appears to fix the issues with getting the
newly planned dive selected.
Fixes#692
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some circumstances Qt will draw a really thick border around
rectangles. This explicitly makes the border of the tank bar thin.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should correctly set all the values and puts us in edit mode.
Testing so far looks good for both single dive and multiple dives selected
(i.e., you can paste into multiple dives).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the GPS coordinates for a dive were incorrect for some reason and the
user wanted to clear them in order to then re-download / apply GPS
information from the Subsurface webservice, prior to this patch we would
always match the location name and re-populate the GPS coordinates, making
it impossible to clear a GPS location without also changing the location
name.
This patch fixes this - but if you have multiple dives with the incorrect
name / GPS location pair, the next edit to a dive that had the GPS
coordinates cleared will re-populate the GPS coordinates (at that point
Subsurface can no longer tell that this was intentional).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Which actually makes the code much clearer as now the object is at the
correct spot on the canvas and the positions inside are relative to that.
No more magic gradiants starting at "92"
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a checkbox for the divecomputer download dialog that allows you
to tell the download to put the newly downloaded dives into a trip of
their own. That in turn will disable the dive merging with any existing
dives, which means that you will not mix up your newly downloaded dives
with any old dives.
That, in turn, is very convenient of you know that some of the dives were
done by other divers (or from testing that happened during servicing etc),
or the dive dates etc were wrong because the dive computer date had reset
due to battery changes etc.
Once you have all the dives in a private trip of their own, you can then
fix them up (delete dives you don't want to merge etc), and then after all
the data is ok you might want to merge the cleaned-up results with
previous trips etc, and then manually ask subsurface to merge the dives or
whatever.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also restructures the code a bit to make it a little more sane and changes
the colors slightly.
With these changes I think we can claim that this
Fixes#557
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shows a color-coded bar at the bottom of the graph that corresponds
with the active gas.
Todo:
- text that explicitly states gas on the left edge of the bar
- better vertical positioning of the bar
- ability to turn this on and off
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far, the fields for the two SAC rates did not show a unit and were implictly l/min.
Now they respect the settings for volume units. This was harder than I thought for two reasons:
1) Imperial units for SAC are cuft/min but a typical value would be .70. So I made the point
the field prefix and what is entered is actually hundreth of cuft per minute.
2) I had to get the rounding right in order not to get effects like 20l/min become .70 cuft/min (19800 ml/min
internally) which would then become 19l/min when switching back.
While being at it, I gave the gradient factors '%'-signs as units.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch improves on the error reporting for the dive computer
configuration dialog to use config->lastError.
The previous code was using a different argument in each function,
which lacked uniformity.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
To avoid confusion, this code update makes the status text empty whenever
there is an error message. This makes the error message more prominent.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Changes the layout of the ConfigureDiveComputer dialog to use a
list of supported computers on the left, with a stacked widget
showing the configurable details.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This patch implements the first step towards OSTC 3 firmware update.
Its not much, just file selection, but I will build up on it from there.
Implements a thread to initiate firmware updates. Currently, this is
for the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements support for reading, writing and backup/restore of set point
settings for the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements reading, writing and backup/restore of OSTC 3 Dil Values
(setting 0x15 to 0x19)
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements writing OSTC3 gas settings to the device.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements the reading of OSTC3 Gas Settings. These are settings
0x10 to 0x14
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Moves non gui classes (configuredivecomputer, configuredivecomputerthreads
and devicedetails) from qt-ui to the top level folder.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
I've moved the .pro file fixes to where it happened, so the rest of the
changes need explanation now. -Thiago
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
I am adding more OSTC 3 settings as I go along. Here, I have
added dive mode and saturation.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Changes the dive computer configuration dialog to use a
tabbed interface. This will make it easier to add new
dive computer models to the interface.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Adds support for more OSTC 3 Settings to the reading, writing,
backup and restore functions. These settings are: last deco,
units, sampling rate, salinity, dive mode colour and compass
gain.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
The ConfigureDiveComputer class now has functions for complete
XML backup and restore. These dump the loaded settings on a
dive computer to an XML file, and there is an option to
restore them.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This patch enables XML backup. We can now save the settings
to an XML file. Currently this backs up just the basic stuff
such as custom text, language and brightness.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
After splitting dive computer configuration classes, the date/time
setting had not been ported. This adds the same to the classes.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This patch polishes up on all classes added for dive computer
configuration to give a clean workflow. The classes can now
write and read data from the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This renames the dive gas functions to not talk about just nitrox, and
to instead talk about gas.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The column isn't just about NITROX, there might be air and trimix in
there too.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the dive list, calling the column O2% is kinda wrong, because in
at least my dive list there are both air and trimix showing up, so this
renames that column to Gas.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First step towards multilingual export. Use the existing translation API
to translate and save words to JSON file.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't export total row in yearly statistics unless exporting the
statistics is checked
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Set Default values and remember user selected general HTML export
settings.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add new row to the yearly statistics table containing the total. Total
values are calculated to some columns only, it doesn't make any sense to
add the total value to other columns (Temperature cols for example).
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make exporting statistics to the HTML page optional.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This splits the code in configuredivecomputer.cpp into multiple files.
The read and write threads are moved to configuredivecomputerthreads.h/cpp,
and the device details class is moved to devicedetails.h/.cpp
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Adds a setting to control the device's brightness. Currently I
have only the OSTC 3. Will add more afterwards.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Improves the writing of device name to the dive computer. The
code has been updated to use a switch statement.
This will make it easier to add new devices in the future.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Improves writing of date and time to the dive computer. This
has been tested using the Heinrichs Weikamp OSTC-3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Following suggestions on the mailing list, this changes the
method used to detect the dive computer family. Detection is
now done using: dc_device_get_type.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Adds a class to write settings to dive computer, and modifies
the existing ones to integrate it.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Added classes for reading data from dive computer. This is
at the basic level and I will expand it as I go along.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Using code from 'downloadfromdivecomputer' class, this code
loads the vendors and products to the respective comboboxes.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Create a dialog for reading and writing settings to and
from dive computers, with a menu entry in MainWindow to
open the dialog.
I will build up on this dialog and change it as needed.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This one is less verbose and very easy to parse. It's guaranteed to have
five components, separated by ':' with no other ':' in the string:
Subsurface:<version>:<PrettyOSName>:<appCpuArch[/osCpuArch]>:<UILang>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 6fdbf2069d.
That was actually the wrong thing to do, now that I think about it.
Instead we should show the translated version on screen and send a
compact, easy to parse variation of this as the User-Agent header.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we didn't get back a JSON encoded string (i.e., if the response
contained no '"') we would access a QList past its boundary.
I'm somewhat hopeful that this is a last second fix for an annoying bug
I've been trying to figure out for a while.
See #514
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When transmitting the Subsurface version string we always want to use the
English terms, not the localized terms.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It was too easy to remove a picture by mistake, not anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we only did it when we added a dive or modified a manually added
dive. But the reality is that an edit of any dive could cause changes that
require the dive list to be reloaded.
Fixes#698
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Select the picture, press delete, profit.
[Dirk Hohndel: removed the stray hunk that snuck into this patch]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gas use logic in the dive statistics page is confused.
The SAC case had a special case for "unknown", but only for
the first gas. Other gases had the normal empty case.
Also, the logic was really odd - if you had gases that weren't used (or
pressures not known) intermixed with gases you *did* have pressure for,
the statistics got really confused.
The list of gases showed all gases that we know about during the dive,
but then the gas use and SAC-rate lists wouldn't necessarily match,
because the loops that computed those stopped after the first gas that
didn't have any pressure change.
To make things worse, the first cylinder was special-cased again, so it
all lined up for the single-cylinder case.
This makes all the cylinders act the same way, leaving unknown gas use
(and thus SAC) just empty for that gas.
It also fixes the SAC calculation case where we don't have real samples,
and the profile is a fake profile - possibly with gas changes in between
the fake points. We now make the SAC calculations match what we show -
which is admittedly not at all necessarily what the dive was, but at
least we're consistent.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we have no data about the gas consumption it makes no sense to show a
SAC of 0. Instead we should show either "unknown" or nothing.
Fixes#693
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the divecomputer adds additional, unused cylinders to the dive, they
would be listed in the profile based printouts. Given that the field is
named "Gas used" that seems wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents zooming out to more than max in the planner. Using a Mac
MagicMouse it happens at times that the finger slides on the mouse while
dragging a waypoint which can result in zooming out further than max.
Fixes#695
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of refusing cylinder pressure data let's just mark it as red when
the values don't seem to make sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While on Linux it was drawn as fine 1px line, on Mac it came out rather
fat and obnoxious by default. With this it's always set to a very thin
line.
This still needs more work, but let's leave it where it is for Beta 5.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was missing from the conversion from the oldPlanner
to the new one, and it also works ok on the profile.
One thing is missing is the Labels on the bottom / left
saying which position it is, but it's already userful.
Fixes#674
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This better describes what the variable (flag) does.
It's used to inform the loop that the last row goes
our of the page limit and that we need to place a new heading
on a new page. In that context 'newHeading' is more meaningful.
The name 'isHeading' is confusing for (i == 0), since it remains
'false' yet the 0 index row is actually a heading.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a row height is more than the available height on a page
(minus the height of a heading row) we have to skip this row (dive).
The current profile print simply does not support that and it does
not make much sense. For that to happen either the page will have
to be tiny or the user must have entered a very long text for "buddy",
"dive master", "location" or there must be some sort of a
very-large-font-while-printing type of a problem.
Technically, rows spanning on multiple pages is doable, but probably
not worth the effort.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had pointers to data structures on the stack which we frequently
reallocated. These data structure contain basically a filename and an
offset. We then create a hash of the pointers to those datastructures with
the filename being the key. And then we passed those pointers around
through a Qt model(!!!) only in order to then later look up by filename
what the offset might be.
I am at a loss for words for the lunacy behind this design.
How about we just remember the offsets and pass the integers around?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of the way deleteLater() is implemented, the pictures need to be
hidden, otherwise they might stay around at the wrong time (e.g., when
printing).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we disconnect the picture releated signals then in dive add and dive
plan mode the pictures from the last shown dive could appear on the
profile. That's not cool.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Checking for available printers appears to sometimes fail, even if there
is a valid PDF or PS printer.
Instead we bail if we can't get a valid size for the printer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While it's nice to have immediate response to gradient factor changes,
there is an oddity that very low GFHigh values can cause infinite
decompression if the last stop is at 6m.
Robert fixed this and now errors out of deco after 48 hours, but if the
user simply wants to edit their GFHigh from (for example) 75 to 70 and
deletes the '5', we really don't want to trigger a recalculation for
GFHigh of 7...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only time we want the close button is when showing an error at the
bottom of the main window.
In the other cases (maintab, globe) we need to explicitly hide it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Revert "Don't add a close button to KMessageWidget"
This reverts commit 75c9bcd726.
Revert "Remove unused variable"
This reverts commit 9edee3477a.
I was fixing the wrong problem... instead of removing the handling of the
Close button I should have figured out why the close button was
incorrectly shown in the first place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It appears that at least on Win7-64 Windows tries to create the temporary
file in C:\ and fails because of insufficient permissions. How stupid is
that.
Instead we roll our own tempfiles, based on the already existing tempfile
name that is passed in.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we add a picture to the dive, this will not change anything
else, so there's no need to recalculate the profile_plot info.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Save Yearly statistics as JSON data to the stats_files.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The layout was a hardcoded position without layouts, that
would only work on english language since other languages can
have bigger strings than the current ones.
Also removed the 'setFixedSize' stuff and let the widget
find it's best size for itself.
Fixes#656Fixes#396
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The issue with the dive list was actually the Planner Settings widget
that was in the same space as the dive list but hidden, but since it
had a minimum width we couldn't resize the dive list to be below the
planner settings minimum.
Fixed by inserting the contents of the Planner Settings into a QScroll
Area.
Fixes#679
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some of the toolbox icons will trigger a recalculation of the dive,
triggering then a replot, that will copy the dive to the displayed_dive
again, but in the case of a edit this would discard the edition (
that would still be shown on the UI ) leaving the dive in an
unconsistent state.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When pressing Print or Preview from the PrintDialog, we need
to first check if there are printers installed. If not
we abort and show an error message.
This is needed because if no printers are installed,
things like the reported page height could be zero and
the profile and table print code in PrintLayout will
break.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In #671 a user reported that the table print outputs a blank page if there
are dives for one page or less to be printed.
This doesn't really makes any sense.
A possible bug in Qt4's QPicture is suspected, so we only enable the
vector print for Qt 5.0 and newer versions.
See #671
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Almost invisible, mostly looking like an odd bug in the profile code,
there was a tiny red line at depth 0 in the planned profile. Turns out
that was the missing mean depth. We didn't populate enough data in the
dive computer of the dive we generated from the plan (and the length of
the depth line was incorrectly determined by the duration of the dive
instead of the duration stored in the dive computer).
Fixes#570
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to change the displayed numeric value of the altitutde and not just the
unit suffix when changing unit systems.
Fixes#681
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
zip_open needs correct directory separators. QFile::encodeName does not
do this conversion, so we must call it explicitly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the problem I pointed out im my comment to #667 and hopefully also
the original problem although I cannot confirm since i cannot reproduce the
problem in the first place.
See #677
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't blow into our cylinders under water.
Negative pressures should be allowed as they might arise from dive planning
without taking care of gas consumption.
fixes#644
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt internally always uses / as directory separator. #651 shows that in the recent
files menu, under windows we can have double entries with both versions of the
separator. This patch should normalize the menu entires to use the native separator
(i.e. \ on Windows). (Untested due to lack of Windows computer).
See #651
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is yet another unintended side effect of the UI restructure changes.
I stared at this code for so long - I can't believe I kept missing this.
Fixes#668
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The error with 'ungrabMouse' warning that we got was because
we were removing an item that had the mouse grab instead of
waiting a few milisseconds so it won't be the mouse grabber
anymore.
So I'v used the Animations::hide() to get rid of it, and
since it worked well, I'v also added a Animations::show()
method to display it in a good fade-in way.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the remove_picture functionality, with code
shamelessy stolen from remove_event, and hoock it
up with the interface.
Fixes#650
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the idea is to remove the picture in the future, we need
to not hold the row on the model, as when we delete one, the
other pictures will change the row. but the QUrl is unique.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch hides a picture from the dive, it should actually
remove it, but because I didn't found a quick way to remove
a picture from the dive yet, it just hides it.
To remove a picture from the dive, the DivePictureItem has to
remember the QUrl of the original file, to remove that from the
model, and currently it only has the QPixmap.
this can be for 4.2.1 or we can postpone 4.2 a tiny bit since this
is a important feature.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Reusing the displayed_dive for this caused all kind of odd problems that
were hard to reproduce, because the behavior depended on what was in the
corresponding fields of the current_dive. Worse: the GPS location handling
prevented us from reliably removing the location of a trip.
The solution isn't ideal and certainly isn't elegant. Maybe we simply
shouldn't reuse the widget here. But I think what I have now works - I
tried hard to make it break again and couldn't.
Fixes#659
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was preventing the recalculation of the ticks, making the
line static when we enabled or disabled the PP graphs.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"ups", as I did this in Metric system I forgot to update
to imperial when the user selected it.
Fixes#665
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know I tested this - no idea how I missed this.
Anyway, this was of course utterly bogus. Whenever we get a time from a
time_t into a Qt Date or Time datastructure, we need to adjust it by the
timezone offset as otherwise Qt will assume it's in local time and
helpfully change it to the wrong values for us.
See #655
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: took only one of the two parts and adjusted commit message
accordingly]
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use const-reference where we can gain a bit of speed from that
and clear an else { if {}} by using else if.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Our core structures are kept consistent by calling delete_single_dive()
and there is no reason at all to even touch the UI selection as this all
goes away with cleanUpEmpty()
Fixes#660
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
commit f29f41ae9e ("Planner: fix start time handling") broke the start
time handling for Add dive. While in actual planner mode we set the start
time for the plan, we did not do this when simply adding a dive. The
moment the time / date was changed (which admittedly in real life a user
would most likely do) all was well, but if the user just accepted the
"now + 1h" default, things went badly wrong.
Fixes#658
See #655
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is a weird QPicture dependency; we need to offset a page
by headingRowHeightD2, which is half the heading height.
The same doesn't make sense if we are rendering the table widget
directly to the printer-painter.
Moving the offset inside 'pageIndexes' is less desirable.
The bug itself manifests when a top margin is set on Win32,
while on Linux it's more obvious.
On new page start, a fixed height from the last dive on the
previous page becomes visible even if the math seems correct.
Offsetting both the page index and the vertical position at
which the QPicture is placed fixes that.
If 'table.render(&painter...)' is used the bug also goes away
and our 'pageIndexes' start to make sense again, but we want
to use QPicture so that the table is in vector. I don't have a good
explanation why this happens!
Tested on Ubuntu 12.04 and Win7.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use QPicture to do that.
QPainter::drawPicture() requires offsetting the target QPoint's
Y value by two times the headingRow height.
This can be improved the hardcodding the offset when the
'pageIndexes' are calculated, but is a bit complicated.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the profile print, the number of dives per page is:
divesPerRow * divesPerColumn
If we have more 3, 0.6 seems optimal, while for less we can
pretty much use the default scale of 1.0.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QImage fix for the recently reported
"huge-vector-lines-in-PDF-printouts" bug is only needed on Linux.
For Win32 and OSx we can render to vector.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixing the font size is required, because we don't really support
a dynamic row height, as the row height is set in the class
constructor.
7 seems optimal for all print modes.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is wrong because we don't really need to scale. We already
have the estimated page dimentions in pixels, so taking the
quotient of the printer DPI and screen DPI and then scaling
(probably up) our rendered widgets via the QPainter introduces
blur (due to the oversampling), and a performance penalty.
By rendering at the exact dimensions we ensure that the widgets
are crisp at a 100% printout.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this option there is an exception, which makes the notes section of
the profile table occupy half the page. This way dive plans can reasonably
be printed.
Fixes#636
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We setup the startTime for the dive plan in too many places... but never
actually copied it into the planned dive.
Fixes#640
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Including a tiny change for one of the new strings to be consistent with
the capitalization rules we recently established.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
qt 5.3, win7 64bit.
beginRemoveRows() asserts in removeSelectedPoints()
because rowCount() - 1, becomes less than firstRow.
This needs a check in removeSelectedPoints() if the number
of passed rows is zero.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the screen repopulate itself after a dive change only
one time instead of the old 4. we were repopulateing when we
removed the actual selection to reset the old selection previously
stored, sigh.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The text we generate for the diveplan has a table inside, and
we must use HTML only for the dive plan. so I treat all text
as HTML, look for a table item, if it doesn't have, I treat
it as Simple text and set it on the notes. Works and makes
linus loves me again.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simplifies so much of the code that we were using to control
the visibility of the HeartRate. now things are much saner.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This breaks compatibility with old preferences, but it's a single
key and not that very important so I don't think it's a bigger issue
I've renamed prefs.animation to prefs.animation_speed to denote
that it's a value, and not a state.
Also, fixed the places that were treating it as a state (on/off)
to treat it like a correct value.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The pictures were being plotted in print mode, the main
reason for this was that when we entered print mode and
had already a picture plotted, the method would return
before removing them from the screen. This fixes it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
for some reason we did a if(true) setValue(true) else serValue(false)
now we just use the value to set the value. =p
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All other default settings we get from subsurfacestartup.c's
initialization of the prefs struct. The planner had its defaults there
and in the retrieve of the settings from QSettings.
This changes so the defaults for planner settings will be read from the
defaults prefs struct as all other settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before this function was changed it was really supposed to just change a
gas that was passed in in case there was an event that changed the mix -
but with the new name the caller will assume that they get a valid gasmix.
And promptly we had one caller that didn't initialize gas to be based on
the first cylinder before calling get_gas_at_time().
Instead of adding yet one more spot that knows about the oddity of the old
API I simply changed get_gas_at_time() to do what it name appears to imply
and fixed the other callers not to bother to initialize the gasmix.
Fixes#647
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not supported. Also the profile in "6 dives per page" doesn't really
allow much variations because it looks bad if we scale it down further
on A4.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These were hidden and we don't really support them because
our print layouting is not that flexible in Qt!
Note: printoptions.ui is now converted to UNIX line breaks.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Well, the information was bad, it was being printed twice
if the text is HTML, print only once.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
well... we have a good and working printing system now. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think it's intuitive to do not warn if everything was according to the
plan, and keep the dialog open after a print was due is something that I
find it strange.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just adds the HTML Delegate to print the text.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The model was not being deleted when the table was, and thus we
recreated it for every print.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QPointer is a smart pointer, it will delete itself when the
refcount == 0.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know if this fixes anything, but it is asked of us to
do that by the Qt docs.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a HTML delegate to show rendered HTML on print.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This converts the get_gas_from_events to a get_gas_at_time function that
actually maps our events to what cylinder and thus gas we are breathing
at that time.
[Dirk Hohndel: fixed to actually use the gas that was looked up
(and make things compile)]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
current_dive is the selected dive, and displayed_dive is the one we are
currently drawing. They are quite often the same one, but not in the
case of adding a dive for example.
This fixes potential null pointer dereferences in the case of a blank
divelist, and makes sure we use the correct data in the case of adding
and planning dives.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Get rid of unit type shortcut in planner. Also use "to" instead of "-" in ascent rate intervals.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
is_cylinder_used uses get_cylinder_index as underlaying function that
does the right thing with with respect on how to find the closest
matching cylinder, and handles both types of gaschange events correctly.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds two changes
a) it uses rint() to make sure we don't truncate the displayed values
b) it moves the update of the displayed values into a helper function that
is also called whenever the settings change
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 4.0 we hide all gaschange events during the first 30 seconds,
not just gaschange events on second 0. Eg, the OSTC3 emits its gaschange
event on the first sample, which can be 2, 10 or 30 seconds into the
dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace get_gasmix_from_event and get_gasidx with get_cylinder_index.
get_cylinder_index actually knows about both types of gaschange events
and the difference between them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the info box, we can't use the event data, because its not 1:1
mapped to whats in the cylinder and what we actually switched to. Use
the plot_data here we already calculated what we are switching to.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The values for drop_stone_mode, bottomsac, and decosac are typically the
kind of personal data specific to a diver that is unlikely to change
from one dive plan to the next.
This patch stores/restores them to/from the preferences file. For this,
it adds bottomsac and decosac to the prefs structure; drop_stone_mode
was already there, though not stored/restored.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calculating the timezoneoffset for the current date really makes no sense
whatsoever when displaying a time that isn't "now".
Fixes#605
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we had a trip selected, we ignored that and simply called
the DiveAdd functions, but the mainTab code that deal with selections
to show one or more dives or trips asked how many trips were selected
to the DiveList, and since a trip was selected things go kabum.
Fixes#606
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The profile was still the planner one, so we need to force
a replot.
Fixes#621
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do not use MainWindow::instance() inside of a non-static
mainWindow method, that's just bogus.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ugh. Each time you wanted to change a cylinder, a new connection was
being created on this object, delaying the correctly setup of the item.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When you entered part of the name of a cylinder this was
being treated as a new cylinder, and not selecting the first
one.
Fixes#628
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a 'Use default file' button on preferences in a way
that doesn't clutters the interface.
Fixes#630
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We save an HTML table-based plan, so we need to get the text as html,
not plaintext.
Fixes#634
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- set application-wide locale from preferences
- use custom date format for display
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The access manager is only one, while we can make requests from
different parts of the application, so relying on the manager
finished() signal to see if something was done or not was a
not very good move.
The QNetworkReply is created when a get() is invocked on the
AccessManager and that's unique. connect it's finished()
signal instead.
bonus: code cleanup.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- apply vertical layout to top-level dialog. This solves label clipping
- call adjustSize() on dialog to fit all labels (translated text could
be longer than original)
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were actually searching dives which match the dowloaded position
fixes. So we're also trying to take into account if the fix is automatic
or no based on a limited amount of predefined strings (bad idea, as the
user can change in companion app settings the predefined string).
This way, in actual implementation, if program concludes that a fix has
been manually got or, simply, the user is unlucky enough to have all the
position fixes out of the dive time, find_dive_n_near() function will
pair fix and dive in an ordered way (1st fix -> 1st dive; 2nd fix -> 2nd
dive ...) which is probably erroneous, except for manual position fixes.
BTW actual implementation can't pair the same gps position with more
than one dive, which would be the case, e.g. in repetitive dives while at
anchor in the same point.
The patch changes the logic:
- Search positions for defined dives (instead of dives for defined
positions) without care if position has manually or automatically been
set.
- Only take care of those dives that don't have a position yet.
- It makes two assumptions:
a.- If the position fix has been taken during the dive time, is
correct. If there are more than one inside the dive time, takes the
first one (closest to the DC's reported time).
b.- If not during diving time, the correct one is the nearest fix
before the dive begins (also the usual case if manually fixed from the
smartphone just before jump into the water). But will work too if there
is only one fix *in SAME_GROUP range* after the dive (another usual
case).
- Finally, as copy_gps_location() in dive.h is used only here, let it
take care of naming the dive if user hasn't named it yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In reality we have no concept for handling those, yet. But the UI doesn't
prevent the user from entering multiple cylinders with the same gasmix, so
we need to help the user to get rid of them as well.
If the user attempts to remove a cylinder we check if there's a second
cylinder with the same gas. If that's the case then we can proceed and
remove the cylinder the user wants to get rid of without losing that gas
for the dive. The only tricky issue is that we need to make sure that if
we remove the first cylinder that one is actually replaced with one with
the same gas.
Fixes#622
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
updateDive() cannot reset the changed status - this is called while the
dive is edited. Instead this status is reset when the user either accepts
or rejects the changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We keep getting this wrong. First you check all selected dives that are
not the current dive, make sure the equipment was the same before the edit
and then apply the changes. Then, when you are done with ALL of them, then
you change the current dive. Otherwise you cannot compare to the 'before'
state anymore.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was a fun little bug. Tomaz pointed me in the right direction. The UI
restructure with the displayed_dive had another unintended side effect
here. It is not valid not to set up the widgets just because the dive_list
is empty. The displayed_dive isn't on the dive_list until it is saved - so
while the user is adding or planning a dive, we still need to show the
equipment widgets.
Fixes#614Fixes#601
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oh boy, this should allow for altitude in 'ft' as well.
I set an arbitrary cutoff at 3000m (and switched things to increments of
10m for the altitude).
Fixes#629
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will make more easy to move code around in the future.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the code that saves and restores the dive planner
settings.
Fixes#608
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The text selection was not being set, bummer.
See #628
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Q_FOREACH will expand and already creates a copy of the
contained container, so this is just a waste of cpu cycles
and also increases a tiny bit the memory consumption.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This causes all kinds of assumptions to go wrong - and it makes no sense.
Move the point to where you want it or cancel the plan.
Fixes#623
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit b0da8c2707 ("When adding a waypoint, use the gasmix of the
_next_ waypoint.") we default to air when adding a waypoint at the end of
the plan by double-clicking. That seems silly since we could instead
continue using the last gas.
I wasn't able to reproduce the "gas list disappears" problem in bug #623,
but I did get a silly air segment added which was equally wrong. Maybe I'm
lucky and this fixes the problem that Henrik sees as well...
See #623
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I cannot reproduce the problem, but adding one more call to
unselectDives() should ensure that all dives are marked as not selected
before selecting the last dive that was downloaded.
See #620
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes sure that YAxis is not expanded to cover heart rate
when it is displayed on profile panel.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dive photos are copied to the photos directory on export. The photos
section appears only if photos exist.
C++ helper functions are added to copy images to the photos directory,
Additionally the photos directory must be passed as a parameter to the
write_one_dive function to save photos to it. Some options structure may
be needed instead of passing many arguments.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The filter menu wasn't connected to anything other than a debug print.
This removes that menu.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I prefer that we show the first tab by default. Everyone should remember
that Qt Creator changes the currently shown tab as default on save.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't like that the event structure includes the variable length array.
That really makes it a pain to change the name of an event (on the flip
side, freeing events is easier I guess).
Anyway, to correctly rename an event we need to actually remove the event
from the correct dc and then add a new event with the new name. The
previous code was insane (it only worked if the new name was of smaller or
equal length, otherwise it had a beautiful buffer overflow).
And of course we need to do this both for the current_dive and the
displayed_dive.
Fixes#616
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use a macro that works to get the current DC.
Fixes#613
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We signal a bailout to OC via setting the setpoint to zero. A setpoint
between 0.2 and 0 would be really wierd, but i couldn't figure out any
better way to keep the bailout deco planning.
Note:
The gas consumption of CCR dives are plain wrong, but this atleast lets
you plan your deco for a CCR bailout plan.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the Set point spinbox, it was kinda hard just stepping by the
default 1.0, so setting it to step by 0.1 makes much more sense.
The int SpinBox got a step size parameter for consistency.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous code used qreals, but it feels clearer to use doubles when
the name of the class contains the word double. The performance loss of
using doubles instead of floats on arm is non-existent in this case.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes simple copy-paste error that the DoubleSpinBoxDelegate range
was stored as int, thus rounding min value from 0.2 to 0.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When adding the method that includes the depth unit to the DiveItem class
I realized that this was yet another implementation of our depth unit
conversion. We should just call the existing helper instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least for my dives there wasn't enough space for depth and duration in
the header, most likely because I made the last two columns smaller to
create more space for tags and suit.
With this commit the depth and doration in the header now spans two
columns and easily fits.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
use setPointSize instead of setPixelSize to make it device independent,
also reduced a bit the size of the font.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can use QPicture to record the painting done by a QPainter and it will
be saved in vector format, then we can simply paint that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All animations are now on the Animations namespace, which resulted in a
bit of code cleanup, which is nice.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems to be needed for the correct print of the profile,
What was happening on the print code was that the profile even in print
mode was doing animations, and we were getting a frame of it and trying to
print it.
Also, a bit of code cleanup.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old layout tried to add the search on top of the help view, which
didn't really work because of the way that the QWebView rendered: we got
garbage after a scroll with the find opened. So now I'v created a QWidget
and layed down the QWebView and the search bar vertically.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Based on Glance's idea on rewritting the Delegates, but
we don't need to redo the wheel as Qt already gives us
the correct Delegate, we just need to set some boundaries
on it before returning.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know why the plot_info was walked backwards - for our purposes
walking forward needs to make a lot more sense. And the event nicely goes
away when the diveplan gets modified and the displayed_dive gets reset.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
affects mainly capitalisation on the dive list context menu
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Makse capitalisation consistent.
Makes title more specific
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Makse capitalisation consistent.
Makes title more specific
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix labels view in dive profile.
Add Jqplot css file to the exports.
The css files fix the view and enahnce the plot.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code hoocks the pictures with the preferences change.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The export dialog was being created but never free'd.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The new macro hides all 5 lines of code from the old code to just one,
since we already have 15 buttons and more are comming, and *every*
code is just the same, it's a logical change that will make us reduce
now 75 lines of code to just 15, in the future this can be bigger.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the toggle picture button and hoocks
it up with the rest of the code. I'v also changed a call
from ProfileWidget because it caused errors on the ui
generated code, where it would try to call an still-to-be
instantiated object.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For consitency in the UI
There are plenty more of these to find, and once in a while
"Temperature" looks more apropriate, like in a title, but most
of the time "temp." works best.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Makes capitalisation consistent
Replaces Tech diver with Technical diver
Adds title to survey dialog (was "dialog")
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the settings quirk workaround for the pressure import from the
Seabear CSV file.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: scaled PNG files and added the code to show them and
to make them somewhat bigger]
Signed-off-by: roberto forini <forini.r@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
since we need to filter for incorrect comma usage, we need to
recurse instead of passing the keyEvent to the base class.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some tags were wrong when the user added two commas, so this patch forbids
the use of a comma when we don't have any tags.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And no, I don't want "\," to be legal in our tag, either. Way too much
pain for way too little gain.
Fixes#560
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Exporting in Subsurface format saved only selected dives even if user
attempted to save all dives.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By mistake i used memcpy to "fix" the samples, but the sample list was
overlapping so i needed to use memmove.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is no reason to treat drop_stone_mode different from the rest of
the planner settings, so move it to our prefs structure.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Seabear software stores its settings as two csv-rows in the same
file as its samples. These settings got read as two bogus samples in the
beginning of the dive.
This kills those off and repairs the temperature damage they done.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the Seabear CSV the NDL and TTS fields are in minutes, not seconds as
their time field. This is an ugly quirk but it gets the job done.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The CSVUnits QComboBox wasn't in a layout and that made it look a bit
weird. This adds a layout around it.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a preconfigured import setting for Seabear CSV files.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seem to work better, but it misses a couple of items at times (for
example the highest label on some of the axis).
Needs lots more testing.
See #590
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the first dive we end up rendering is the dive currently shown, the
info overlay would end up being printed which looks really silly.
See #590
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some strings that won't be possible as the translation needs to be
aware of line breaks, etc. But for these strings it seems like the right
thing to do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Introduce on_location_editingFinished() and move the GPS coordinates
completion logic there. This simplifies acceptChanges(), but replaces
the clever code for multidive completion by something a little more
straightforward.
Note the call to on_location_editingFinished() from acceptChanges();
without it, completion only happens *after* the dive has been saved.
[Dirk Hohndel: trivial merge, minor changes for consistency]
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It already got one from its ui-file, and this causes a warning when
starting the application.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't think this is the right approach, but it makes things work. The
reason that it was not working before it's because upon save we are not
copying the edited dive against the displayed dive for some reason, and I
didn't find the place that should deal with that.
This fixes one of the various issues around tags, but others remain.
Fixes#587
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Very good patch, lots of removed lines. :)
Only try to add the tags when user accepts, discards the
test to see if the tags were changed or not, delete the
old list and copy the new one always.
only bug that's appearing now: taglist is still empty after save
we need to reselect the dive to make it appear, fixing that
on the next patch.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The way that we work with tags is a bit weird, we have a global
tag_list pointer and every dive copy the tags from there. the problem
is that the tags_changed() function looks at those two places ( the
global and the dive-local lists ) to see if something was changed,
but we shouldn't add anything at the global taglist untill a tag
is really added, so that function is bogus.
The correct way to check if something changed is to check all the
strings in tags against the strings in the QLineEdit and see if they
are the same, then we can add things to the tag_list.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to first replot() to get displayed_dive updated, then call
refreshDisplay() so the picture model gets repopulated which triggers the
pictures to show up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move the gpsHasChanged() call on selected dive when coordinates have
changed *before* autofilling, otherwise it erases the autofilled values.
Also update displayed_dive when autofilling, otherwise values are stored
but not displayed immediately after saving.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch allows only non-negative depths in the divepoints table as
negative depths confuse the planenr/deco algortihm. The spinbox appearing
in the table should get a setMinimum(0) but I was not able to find the
correct way to implement that.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we have a dedicated dive that we use to display things, we can
simply get the information from the current dive and use it to setup said
displayed_dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was way too complicated because we used to edit a "live" dive that
was on the dive list. All we really need to do is systematically make
sure that all the widgets are in the correct state.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Recreational divers, especially ones diving with air, do not need to be
shown that their gas can be mixed with 0 liters of O2 and He. And
similarly Nitrox diver does not need to know about 0 liters of He.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This corrects the logic of adding a waypoint actually meaning that
a previous segment is subdivided into two. Both new segments should
by default use the gas of the old one. Since the gas is stored
in the waypoint (divedatapoint) at the end, we need to use the _next_
gas.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we were trying to get rid of the tracked gas pressures that
were added when using the plan infrastructure to create a dive. Now that
this isn't the case anymore we can stop doing that which magically makes
setting start and end pressure while adding a dive work as expected.
Fixes#582Fixes#553
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 77a55db9d3 ("Use QDialogButtonBox in KMessageWidget") added a
close button to all our uses of that widget.
As much as I stare at the code I can't figure out why. For now I'll simply
brute-force disable them...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QDialogButtonBox can auto-choose the order of the actions based on the
current interfaces guidelines, but in this case its a guessing game.
It does a half-decent job off guessing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move the Save/Abort buttons in the planner to the top left and change
them to Save/Cancel to be consistent with where our Save/Cancel
buttons are in the Maintab.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Recreate the helper function (which now does something fairly different)
to share the common code between the two modes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I had tested this mostly with add dive and completely forgot to track the
same changes in the planning routine. Oops.
This allowed to get rid of a no longer useful helper as well.
Fixes#594
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add commented out options to subsurface.pro that enable debuging the planner.
Remove obsolete comment.
Clean up the selection tracking.
Force the re-sort of the divelist inside the reload instead of explicitly
calling it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Prior to commit 95cb4e, when a new dive was added with the same location
name as a previous dive, the GPS coordinates for that new dive would be
automatically set to that of the matching previous dive.
This restores this feature, by duplicating code further down
qt-ui/maintab.cpp that handles the case where multiple dives are
modified at once.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the corresponding checkbox is checked the planner does interrupt
pure O2 deco after 12min for 6min on cylinder 0.
To make this work for air I removed the gasmix_is_null logic.
I guess that makes the planner feature complete for the next release.
[Dirk Hohndel: trivial merge into latest master]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gets rid of the stagingDive and stops the constant adding and
removing of dives from the divelist (that was an INSANE design,
seriously).
When adding or planning a dive all work is now done in the dedicated
displayed_dive.
Add dive mostly works - when the user clicks save the dive is added to the
dive list and selected.
Plan dive is mostly untested. It passed trivial "start planner, save"
testing so it's not entirely broken, but I'm sure there's more work to be
done there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this patch a simple click into the main tab does not start editing
mode. Only once a value is modified do we show the message box and disable
the other widgets.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of comparing the dive structures (which doesn't work since the
strings are actually copies), track if the user made changes.
Cylinders and weights still need to be compared as they are handled in
different widgets.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of passing in a divenr of -1 to make it clear things this changes
things to use an options "clear" flag.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No longer use the dive structure that is passed in but instead always use
the displayed_dive to display things.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can safely copy around dives (specifically, copy the dive to
be displayed / edited into the displayed_dive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't have a concept of what to do when plotting multiple dives, so
let's not pretend and remove all the messing around with lists.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is massive confusion about what we display when and where and which
dive structure (or pointer to a dive structure) contains which information
at which stage. This is the first step towards restructuring all of this.
This creates a global variable displayed_dive which at any point in time
should be what is displayed on screen (both in the profile and in the
maintab). It removes the editedDive concept from MainTab.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The initial gas change event is really special - it just specifies the gas
mix from the dive computer. So don't show it as an event if that already
matches the initial gas.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These cylinder pressures are actually just artefacts of the way we track
gas consumption in the code shared between planner and add dive. We don't
want them in the actual dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calling enableEdition appears to corrupt the index that is passed into
this slot.
This doesn't fix the problem that we can't edit the cylinder start and end
pressure of a manually added dive, but at least we no longer try to edit
and invalid index.
See #582
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No point in scaling them every time the user looks at the dive. Over time
this may waste some memory (especially if people have a ton of pictures
and let the process run a very long time). For now I won't worry about
that.
Fixes#577
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A little bit of CI: Print our logo on the print out dive plan.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
--f46d04426a604016a404fd1cd218
Content-Type: text/plain; charset=UTF-8
Tab step order should follow a logical order, top to bottom, left to right
and not jump around.
--
//Jocke
<div dir="ltr">Tab step order should follow a logical order, top to bottom, left to right and not jump around.<br><br clear="all"><div><br>-- <br><div>//Jocke</div>
</div></div>
From e8ff7986f858403fb4f5277741c9fa528962f9bc Mon Sep 17 00:00:00 2001
From: Joakim Bygdell <j.bygdell@gmail.com>
Date: Tue, 1 Jul 2014 09:28:23 +0200
Subject: [PATCH] Fix tab step order in planner settings.
Tab step order should follow a logical order, top to bottom
left to right.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the "impossible to work with" planner with the mouse
now the dive will only grow and not shrink untill you release
the mouse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those are ligther colors and it should be a better choice
a way better choice is to ask for a designer wich color to use
but most of my minions are busy.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The new one, while it's prettier, doesn't fit into the
current layout in a good way, we need a better layout for
it. So it's code will continue as dead code for a while.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This hides the calendar widget when the user press esc
when it's running.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a event filter to hide the calendar
widget when it loses focus
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is almost a rewrite of the Search function on the WebView
the old code had a few uneeded things, mostly being a subclass
of QMainWindow instead of the QWebView - this makes the code
use a tiny bit less ram.
The SearchBox was also moved to an own class ( we can use it
later to filter the contents of the DiveList for instance )
and a forced use of the pixmaps for the Mac and Windows platform
was added.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Qt Framework adds a visual 'tab' on the children of a
node, but if we forced a right alignment on them, it will
lose that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We build 32bit Windows binaries - but we really want to know if the OS is
x86_64 or i386. This little hack should give us that information.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This switches the QTextEdit fields to QPlainTextEdit (I don't see a reason
why we should allow HTML here), no longer tries to have a default text but
instead adds labels for the two fields, connects the UI so th data is
collected and uses a bastardized WebServices subclass to send the data to
our backend.
Fixes#546
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use jqplot to draw dive profile, Depth and pressure curves. add the
library Javascript files under the theme directory and editing the
exporter. Load them to the HTML template dynamically with
synchronization as they are dependant on each other.
Also Adding min version of JQuery that is needed by the library.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason the isVisible() check failed, even though the message is,
indeed, visible. But it doesn't seem to hurt to unconditionally hide the
message, so I'm doing that instead.
Fixes#576
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses a bit of naive gas computations to figure out how much of
different base gases you used up on the dives the statistics is done for.
It's quite useful to get a minimum line about how big your gas bill is
going to be after a dive trip.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm not sure I love the result just yet - the different fields don't quite
stretch in a natural way (i.e., they don't stretch proportionally), but at
least eventually they all stretch.
Fixes#569
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When I moved the settings for SAC's from the planner to the plannerSettings widget
I forgot to move the corresponding methods from one class to the other.
This fixes the display of the gas consumption in the planner
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also fix the setWindowFlags calls - those are not incremental, so you need
to call the method once and combine the flags.
I would also like ESC to close the calendar widget, but haven't figured
out how to do that...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also adjust the minimum size, given I changed this in commit
26855234ac ("Make date widget easier to read").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
